My dishwasher stops and displays a pf code when there is 38 mins left in the cycle. After it displays the pf code it restarts itself. So my dishes never get to go through a full cycle. What do I do?

Stop trying to restart it! There is obviously a fault so check your manual. If not in there contact Manufacturer or service agent.

Good Morning Friend,

I understand that your Frigidaire dishwasher, model# FDB4315LFC2, starts and then stops, and flashes a "PF" code when it stops. The "PF" code is stating that there has been a power failure. There could be a possibility that your dishwasher is losing power mid-cycle. I suggest checking your home's circuit breaker, the wiring to your dishwasher, and if you have a cut-off switch, checking that as well. I also suggest resetting your appliance, by shutting the power off at your home's circuit breaker, for 20-30 minutes. Restore power and start any cycle. If further troubleshooting is needed, I ask that you please let me know the error codes displayed on your appliance. Hope this is helpful.

-Best Regards-
WP

Code PF means power failure turn off the breaker that handles the dishwasher for a few mins. then turn it back on. it should reset itself

fault with the programe as it has stoped in mid cycle

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

,..,

Same issue here. If you found the solution since the original post, please share it. Like you're saying, it's a very frustrating problem.
Thanks!

Hi,

Here is a tips that I wrote that will help to explain why you get the PF Error Code

PF Error Code for Appliances

heatman101

-==-][][

pf means power failure. you may have a loose connection underneath where main wiring ties in in box.

pf is means power failure.

What about the pump, did you checked it ? Does it drains water out the machin ?