Question about Canon PowerShot G3 Digital Camera

1 Answer

Power shot g3

Hai how much it cost for memory card for this model and how about the charger for battries
]

Posted by on

  • savk Apr 13, 2008

    i also need the price

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,635 Answers

I can tell you from experience that the original batteries are expensive for this camera. I tried clone batteries and they are a waste of money. Use the original Canon batteries for reliability.

As for the memory card, an ultra fast card is the best. With the regular speed card the saving process is very slow. If I remember right the G3 can only see up to a 2 GB card at maximum size. I tried a 4 GB card and it did not work.

Consult the instruction booklet of the camera, or call a local camera store for the recomended memory type. The camera store can tell you what their customers were most satisfied with.

Jerry G.

Posted on Apr 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When loading images onto my computer I am getting 2 copies of each image. Why?


Did you check how many copies there are on your memory card?
I shoot RAW and JPG, so I'm used to get two images, with the same file name, but different extension. Check the file name and the extension. Check both, camera and computer.

Jan 31, 2015 | Panasonic Lumix DMC-G3 Digital Camera Body

1 Answer

I got a canon power shot A 95 camera from my uncle.there was no manual with it. Can I get on line access to the manual that I can print off .moreover,there is a problem that a picture taken gets blurred,a...


You can download the manual (and more) at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a95#BrochuresAndManuals

Feb 08, 2011 | Canon PowerShot A95 Digital Camera

1 Answer

After changing memory card my Canon power shot A60 will not power on...installed new batteries ..came on a short while with message memory card error...how can I fix this?


Take a look inside your camera's CF card slot. I suspect that you may have a bent pin in there. If so, don't fret. Although professional repair would be more costly than the value of the camera, there is a very good chance that you can repair this yourself. Please see this link.

May 22, 2010 | Canon PowerShot A60 Digital Camera

1 Answer

Cannon power shot g3 driver for window7


you need 64-bit drivers for window 7... search on internet..

Feb 21, 2010 | Canon PowerShot G3 Digital Camera

1 Answer

Camera will not turn on. Already replaced batteries.


Hi,

as per your camment you already replace the battry thats means no problem in battery Ok Firstly please follw the steps,remove memory card(if have),power resourses like AC power adaptor and batteries and wait some some just about 10 min,than reinsert the battrie and AC power adaptor,swith on the camera without memory card,if it is work and than insert ithe memory card otherwise reinsurt the memory card correctly and close the memory card door properly if the camera working fine other wise follw the third instuction that check the AC power supply,this is connect properly through input or not.connect the properly and turn on the camera and check issue is resolved
If you not find the solution thats means your camera has been damaged,need the service of camera and second resion is if you insert the battry incorrectly ,some issue
One more resion is images in memory card,firstly download ths images in system and formate the card.
Thanks,

Jan 16, 2010 | Sony Cyber-Shot DSC-F707 Digital Camera

2 Answers

I can´t switch my camera on and i also can´t recharge the battry throw usb


The camera doesn't charge though the camera is on. It only charges when the camera is off. Here are the steps for no power problems: 1. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera. Please make sure that you are installing a fresh/ fully charged battery c. Turn the camera on. 2. Without the memory card, turn your camera on. (If it works then it?s your memory card that is faulty) 3. Please test with the a different battery If you do not have access to another battery Try these steps instead: Please take the battery out of the camera. b. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the battery. If you camera doesn?t switch on you will need to order a no power repair with KODAK or a new cable.

Jan 15, 2010 | Kodak V803 Digital Camera

1 Answer

My LCD screen on my Canon Power shot G3 is blank (just white). There are no icons; no viewing of things I wish to photograph. I called customer support they said there was no problem with the CCD image...


If the CCD were bad and everything else OK, you would see all the icons on the LCD (viewing screen), and you would be able to see images on the memory card that had been taken in the past while in Replay mode. The service letter you refer to covers repair of a defective CCD only. The model of the CCD affected was not installed in the G series PowerShots. The symptoms you describe indicate that either the LCD or something else in the internal processing electronics of the camera is bad.

Sep 14, 2009 | Canon Digital Cameras

1 Answer

Device driver for g3


Dear diksi:

Unfortunately your G3 is incompatible with Windows Vista. To
do downloads to your computer you will therefore have to utilize a compact flash card reader. You can get them from any store that sells digital cameras. I bought one from Wal-Mart three months ago for $14.00.

You can still load and use your software however. You just won't be able to download using Canon Camera Window.

Hope this helps.

Sincerely,
HeavyDLB

Apr 27, 2008 | Canon PowerShot G3 Digital Camera

2 Answers

DSC F55 - Macintosh


I don't think as yet that it is possible to hook up a DSC-F55 via a serial cable to a Mac. And that's a f#$%^ SHAME! So now i'm waiting for a coolpix 950, and there's a long waiting list. The only solution on offer here now (that's Europe i guess) is a pc-card reader for memory sticks, but it restricts you to a powerbook. Boooooh!!! I guess Sony and Apple aren't friends anymore. If anyone disagrees i'd like to know.

Sep 08, 2005 | Sony Cyber-Shot DSC-F55 Digital Camera

Not finding what you are looking for?
Canon PowerShot G3 Digital Camera Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...