In one of my earlier post I posted the phone number where to order the board. However they were on back order so I got lucky an located the upgrade kit on Ebay. I'll post the part number for the kit and boards you need.
TV-3940-01 is a kit that contains the following parts:
Control Board – TV-5210-39
Y-Sus – TV-5210-35
Z-Sus – TV-5210-37
EEprom (2006 version) - TV-2455-03
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I beleive this comes directly from manufacturer.becasue thsi Kit cotains a upgraed E-prom. before you order any kit check it this unit has been upgraded before? if this unit upgraded before you dont need to change kit again. I would say either y-sus or z-sus could be the problem.. anyways chek tis link.. it might help u.. http://www.consumeraffairs.com/homeowners/haier.html
Heard lots of problem with similar case for this tv,you need to buy upgrade kit from the haier itself, there also available at Sears you will get instruction sheet will contain all information all you need is screw driver to replace the parts Control Board TV-5210-39, Y-SUS TV-5210-35, Z-SUSj
TV-5210-37, New EPROM Chip 2006 version TV-2455-03, Upgrade Label
TV-4050-08 and Haier Service Bulletin SB-TV-0003 containing the
instructions to replace the boards yourself.
I beleive this comes directly from manufacturer.becasue thsi Kit cotains a upgraed E-prom.
before you order any kit check it this unit has been upgraded before? if this unit upgraded before you dont need to change kit again.
I would say either y-sus or z-sus could be the problem..
The Haier fix kit is 3 boards to replace the 3 boards in your plasma. So the only way to get it done is to order from Haier/Sears. Sears knows this! Make them come to your home, it is a warranty issue.
Is the tv black screen with sound? That's usually the problem. The Sears service rep will come out, order the upgrade kit, the kit is mailed to your home, then you notify Sears and they return and install the 3 boards. You can do this yourself when the boards arrive and skip Sears, but only if your comfortable removing the back of the plasma (about 25 screws) and replacing circuit boards.
You need the upgrade kit - make Sears come out and order it for you - they know all about it, claim that the monitor should have been recalled. Mine was out of warranty, however I convinced them to fix the TV.