Question about Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

What is wrong?

Is it the modem that wont work or is the computer? (info on "HELP II") all it says is "This page cannot be displayed" all the time. Please help!!!!

Posted by on

  • Van Estella
    Van Estella May 11, 2010

    what lights are on (blinking or not) on your SS 4100 modem?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If the internet I.P address is not correct the screen shows the above message, other wise the address you typed is moved or interrupted some problems. The last problem is modem.

Posted on Apr 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

BellSouth AT&T Motorola Modem Red Light/s, No Internet


Modem, Router and PC

1. Press and hold the reset button on the back of your modem for 10 seconds to fully reset your modem to initial factory defaults.

2. Wait for the modem's Power and DSL LEDs to turn solid green.

3. Open your computer's Internet browser and your modem should launch a mini-setup routine. Enter your FastAccess DSL username in the format of yourusername@bellsouth.net, enter your FastAccess DSL password and confirm your FastAccess DSL password and click next, then there will be an "Auto Calender Update Configuration" page where you will set the auto update info and timezone info so just enter the info and click next.

4. Your browser will refresh the page and say everything is ready to go, this may take a few moments. When this is complete type 192.168.1.254 into your browser's address bar and click on the "Broadband DSL Line" tab, then on the right, click on Connection configuration.

5. Change the Protocol from the dropdown box to Bridged Ethernet Mode, and then click on Save and Restart Connection.

6. Open your computer's Internet browser again and type in 192.168.1.1 into your browser’s address bar. In the Internet Setup, change the Internet Connection Type to PPPoE and enter your FastAccess DSL username in the format of yourusername@bellsouth.net, enter your FastAccess DSL password and click on Save Settings.

7. Close all windows and restart your computer. Your internet should now be working.



Modem and PC

1. Press and hold the reset button on the back of your modem for 10 seconds to fully reset your modem to initial factory defaults.

2. Wait for the modem's Power and DSL LEDs to turn solid green.

3. Open your computer's Internet browser and your modem should launch a mini-setup routine. Enter your FastAccess DSL username in the format of yourusername@bellsouth.net, enter your FastAccess DSL password and confirm your FastAccess DSL password and click next, then there will be an "Auto Calender Update Configuration" page where you will set the auto update info and timezone info so just enter the info and click next.

4. Your browser will refresh the page and say everything is ready to go, this may take a few moments.

on Jul 24, 2010 | Modems

Tip

HOW TO SET UP SPEED TOUCH 5X6V6 BROADBAND MODEM


Once you have an Internet Service Provider ,ISP,
you just need a modem and phone line access,
plug modem into phone socket and then into the computer,

My example modem is.........

Speed Touch 5x6v6 - Broadband Modem
Operating System is Windows 7

log on to the modem using Internet Explorer Bar
Type 192.168.254
this will open the modems log on menu
then enter user name and password
its factory default is
user ADMIN
password ADMIN or 1234

once open there are some menu options on the main page

Speed Touch,
Broadband Connection,
Toolbox,
Home Network,

to add new user and password,
go to toolbox,
user management,
add new user
add password,(write down username and password)
change default user
save and test
should have a green tick next to new default user now

selecting broadband ... shows both your,
dsl connection and internet connection status,
with a green tick next to each heading.

Home network will show you...
all devices connected to this modems network ie
the other computers and printers etc,
connected on your network.
In network ,select your computer in the menu tree,
select configure
this give you a menu to add info about your computer
ie name info, comupters ip address,
access to the local intranet or the internet

Now lets connect to the internet

select Broadband from front page
menu will open and display
DSL & Internet Connections
here we test internet functionality.on? or off?

Now we go to your computer,
go to start
my network connections
run wizard in my network places
select new connection
follow prompts to the end.

open internet explorer
if web page opens then we are done and finished,
or
open tools and internet options,
connections and then lan settings
select automatically detect
Apply then close
Test webpage again,
when ok shut down and restart,
to save the computers new settings ,
Test again with internet explorrer.

if no connections run wizard again,

Hope this Helps,Cheers Misterdj

on Apr 18, 2010 | Modems

1 Answer

Westell Modem will not connect to internet


Shut down your firewall. Hook your modem up directly to your computer. Hit the reset button on the modem and follow the instructions on the screen. You have reactivate the modem and verizon has there own program and it should start up automatically.

Nov 05, 2009 | Westell Wirespeed LiteLine 6100...

2 Answers

Cant do anything


Since you don't have sound on the computer, its possible the drivers are missing for sound, and possibly for other things also, you may be missing your network card drivers, or wireless drivers and so your unable to open up the router page.

Note that your network cards ipaddress needs to be changed to the right range for the page to open.

if your router / modem manual says the default ip is 192.168.0.1 then you will need to set your computers ip to the same range, 192.168.0.5 / 255.255.255.0 for example.

instructions on how to set your ip are here
http://www.home-network-help.com/set-ip.html

ones you have been in the modem, remember to restore the ip to automatic so you have internet access when it works again.

Note that if your just missing the drivers, after installing the drivers your internet should work automatically without looking inside the modem.

Jul 15, 2009 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Wireless is connected,but no internet


hey dear,
thanks for your time.... now, as i understand you correctly.. even though you seem to be connected ot the internet wirelessly, you are not able to pull out webpages right?

Try to power cycle the modem.. turn off modem and the computer for about 5 minutes... then try to power it on.. wait for the lights on the modem to turn green and then try to connect... you should be connected. good luck

Got forget to rate me....... take care.

Oct 25, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

1 Answer

Dropping connection


Replace your modem. I had the same issue. Replacing the modem solved everything.

May 31, 2008 | Arris SURFboard SB5120 Modem

1 Answer

Alarm going off ....ding..ding,,,ding....


HELLO OVER THERE...ACROSS THE POND I SIT HERE IN HOLLAND OHIO
USA THE OTHER SIDE OF THE POND...NOW THANKS FOR THE HELP TO DATE ...BUT ...AND THERE IS ALWAYS A "BUT "I THINK I STUMBLED AND I MEAN STUMBLED UPON THE PROBLEM AND THOUGHT I WOULD ASK YOUR ADVICE AND INPUT IN THE HOPES THAT YOU ALL COULD / WOULD ADD THIS INFO TO YOUR TICKLER FILE FOR THE FUTURE "STUMBLERS.
WELL HERE IS THE REST OF THE STORY...I JUST PURCHASED THIS UNIT ON E BAY FROM SOME ONE WHO I HAVE PURCHASED 3 OTHERS IN THE PAST..THIS COMPUTER AS THE OTHERS DID NOT COME WITH A 56 K MODEM SO I USE THE DYNEX 300M EXTERNAL UNIT AND HAVE BEEN VERY HARPY WITH THE PRODUCT SO I BOUGHT 2 MORE ON E BAY SO I HAVE A TOTAL OF 3 MODEMS ....NOW HERE IS WHAT HAS BEEN HAPPENING ON ONE COMPUTER THE DYNEX WORKS FINE BUT NONE OF THE MODEMS WORK ON THE IBM PROPERLY THEY MUST BE RE-SET WHEN THE COMPUTER IS TURNED ON SO THEY THEN CONNECT ME TO THE INTERNET NOW WE GET TO THE "GUTS OF IT ...I TOOK THE MODEM FROM THE COMPUTER THAT WORKED PROPERLY .....AND I ALSO TOOK THE USB HOOKUP CORD..."WHOLA" PROBLEM SOLVED...IT WORKED WITH ALL THE MODEMS IT WAS THE THE HOOKUP USB WIRE ALLTHE TIME '''WATSON"........I THEN NOTED THAT THE OTHER 2 WIRE THAT I WAS USING WITH THE MODEM WERE THINNER THEN THE ONE THAT I USED WITH THE MODEM THAT WORKED PROPERLY...SO YOU SEE I HAD THE WRONG USB WIRE THAT CAUSED THE PROBLEM "I DO BELIEVE "
IN YOUR OPINION COULD THIS HAVE CAUSED THE PROBLEM WITHTHE ALARM???? IF YOU ANSWER YES THEN I WISH TO APPLY FOR A JOB AT YOUR FIRM AND MAKE THE BIG BUCKS LIKE YOU ALL DO.WELL THANKS FOR THE HELP YOU GAVE WHAT YOU DID IS MAKE AN OLD RETIRED PUT HIS BRAIN BACK TO WORK.
THANKS AGAIN
RALPH oo7
my hat's off to the team accross the pond


"FixYa.com" <auto-gen@fixya.com> wrote: fxnlogo_s.png Technical Support, Instructions & Repair Service

Dear RALPH oo7,

Apr 10, 2008 | Conexant Cnet 5614RV V.92 56K Internal...

2 Answers

Modem


well...those drivers are needed(don't come with o/s) what o/s you using, and what kind of computer?

Mar 31, 2008 | Efficient Networks SpeedStream 4100...

1 Answer

No connection


basically if the internet light on a westell modem is red there are just some settings that has to be change on the modem set up,, it depends in the protocol that you are connected.. for westell 6100 lite,, the default address for the settings is 192.168.1.1,,,,,, click start button then click run on start menu, input http://192.168.1.1 then ckick ok...you will directed to the westell set up page,, default username for modem security is admin and default password is password,, then edit conection - if it promts to input a connection name, account id and password pls contact your ISP to get the infos.... if not just ckick release then renew

Mar 14, 2008 | Westell Wirespeed LiteLine 6100...

Not finding what you are looking for?
Siemens SpeedStream Modem (4100) (SS4100) Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Modems Experts

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

270 Answers

kwiz

Level 1 Expert

23 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a Siemens Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...