Question about Radio Shack 15-2200 Remote Control

1 Answer

5 in 1 Remote by Radio Shack

I purchased the 5 in 1 unit and programed it according to the limited instructions that were included with the unit. I have a Toshiba TV which worked fine with the former Toshiba remote. The Radio Shack remote some how has created a problem that creates the "black box effect" on some programs. It happens on major telecast such as the NCAA basketball tourney, PGA golf, an other direct telecasting. The instructions does not indicate how to remove that black box. I went to Radio Shack and the rep said it was in the TV not the remote, but this never happened until I changed the remote. Any suggestions.

Posted by on

  • Anonymous Mar 28, 2014

    programing instructions


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a thirteen inch in durabrand tv i need to figure out how to program my radio shack five in one universal remote but have no book how do i do it

Posted on May 30, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i program this remote control Radio Shack 6-in-1 Easy Setup Voice Remote Remote Control Easy remote

Turn on the unit to be controlled manually. Press and hold Setup until the voice prompt starts the programming menu. Press 1 to directly enter a code. Press 2 to search for a code. Note at any step if the no buttons are pressed for 15 seconds, the remote will enter the usage mode. Start again from the Setup button. When prompted, press the device button for the device you want the remote to control.

Then enter the 4 digit code (if using the direct programming mode). The LED will blink twice and the remote will announce success. Test if the remote works (play, power) when prompted to test the code and press Setup if it is successful. Then wait until the remote says goodbye and then press Power again. The unit should turn off. (I strongly suggest testing other functions as well after this.) Repeat with other codes if unsuccessful.

For searching through the programmed codes, start as indicated above: press and hold Setup and then press 2. When prompted press the device button. Then press the test key (power usually). Slowly alternate pressing CH+ and power until the device turns off. Press CH- if you miss the device turning off. Press Setup to store the code. Then after the remote says goodbye check if the remote works for all the functions. Repeat the above if it doesn't work for all features.

The manual for the remote is available here: . This file is a PDF in a zip archive and does include the code list at the end.

Please note that codes in the remotes are limited to those for devices released at least 6 months before the remote was programmed. If your device is newer than your remote, you may need a new universal remote. I suspect this remote may be from 2004.

I hope this helps.

Cindy Wells

Mar 01, 2011 | Radio Shack 15-2146 Remote Control

1 Answer

How do you program my tv(samsung) with universal remote 3 in 1 from radio shack. i have the codes but need directions now. thanks, taylor

Read the instructions that come with the Radio Shack remote control. Or give a model number. Chances are you can find that remote controls manual online by searching or such.

Nov 22, 2009 | Radio Shack 3 in 1 Universal Remote

1 Answer

I bought a 3-in-one remote control #15-2147 but I lost the instructions how can i program my tv jvc without the manual

need the code number to program an old sharp portable tv to the radio shack 3-in-one remote control

Sep 25, 2009 | Radio Shack (15-2147) Remote Control

1 Answer

Radio shack universal remote for dish dvr

the manual is below on pdf format.

Nov 27, 2008 | Televison & Video

2 Answers

3-in-1 remote 15-2147

Have you tried these codes?

Toshiba TV codes: 0154, 0156, 0060, 1945, 1935, 1918, 1704

If your TV is a TV/DVD combo then use code 1935

Please follow "Programing a Device" on the product manul.

Feb 18, 2008 | Radio Shack (15-2147) Remote Control

2 Answers

Radio shack 3-in-one remote

Need programming codes for Radio Shack 3-in-one Remote Control for JVC and Sylvania TV

May 02, 2007 | Radio Shack 15-2104 Remote Control

Not finding what you are looking for?
Radio Shack 15-2200 Remote Control Logo

2,218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

xxxxxx xxx

Level 3 Expert

4732 Answers


Level 3 Expert

98879 Answers

Are you a Radio Shack Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides