I need a fuse for my Behringer pmp 2000 mixer. How can i buy it.

i dont now mach about the computers sorry

Your PMP what? Is this a Behringer?... and if so what model?... If it won't power up, for goodness sakes do NOT replace a blown fuse as additional damage usually results. Get it serviced... if under warranty, then exercise the warranty. If it is a BEhringer, then also read my tip on Fixya tips regarding PMP mixers and a hazard of using 1/4 inch plug speaker cables or adapters.

Sorry, but the fuse "boat" is not readily available. You USUALLY have to buy the whole holder... the whole thing is around $3 from Digikey.com. Many are manufactured by SCHURTER.

Buy this kind pf fuse holder is very easy to install. But rememnber you have to desolder the old one, solder extension wire to the board and to the new fuse holder. Make sure the new fuse holder meets the standard of the old one. And of course can hold the right fuse for your machine.
http://www.allelectronics.com/make-a-store/item/FHPM-31/3AG-PANEL-MOUNT-FUSE-HOLDER//1.html

If the fuse blew do NOT replace it till the unit is serviced or you will burn up more components. These units will blow out from a minimum of three to 30 components when they blow.

There is weak insulation between layers of the power amp circuit board and the arcing destroys a minimum of three transistors and often many more components on the power supply board as well.

I have repaired several of these and it is a lot of work. The power amp module can be had for about $175 but it often takes out the power supply as well.

hello,
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} tries websites like Shopjimmy.com,Ebay.com to buy parts for the replacement.

Good luck..

Try this Behringer support:

BEHRINGER USA, Inc.
18912 North Creek Parkway, Suite 200
Bothell, WA 98011
Tel.: +1 425 672 0816
Fax: +1 425 673 7647

I just repaired a PMP3000.

A bit of warning on these. Do not let a speaker leads get pulled while powered. They can arc out the power amp causing extensive damage.

If the fuse ever blows do NOT replace the fuse as much more damage will result. Service the unit before using.

It sounds like you need just the fuse carrier...

This is as close as I can find:

http://mouser.com/ProductDetail/Schurter/62002300/?qs=sGAEpiMZZMv1TUPJeFpwblxZ%252bgbqW48rbR6t5kzh87o%3d

The only way to get exact is to go through Behringer or get an exact part number and manufacturer.

Disassembling your unit to get at the part would be a lot of work. I have repaired three of these and am familiar with the unit.

DO NOT REPLACE A FUSE if it blows. You will do additional damage to the unit internally.

When these blow, there is damage inside that must be repaired before restoring power.

To get an exact replacement fuse holder it is best to get it from Behringer parts. This one has a switch in it depending on which way the fuse carrier is inserted.

Hi,

You can download the manual by clicking this link

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from:

http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa