Benq 24" wont comes back after sleep mode

Hi,

Please record the amount of time that it takes until your device goes into sleep mode and set a timer for 5 minutes less than that time everytime you begin to use the lg device. At the points the timer/alarm goes off, you can simply lower/increase the volume and the lg's internal sleep timer should be reset.

Thank you.

Hi,

Please switch to another mode - maybe power save mode before the machine has a chance to reach the point where it goes into sleep mode. Forcing the machine into another mode, should mean that it can't go into sleep mode.

Thank you.

The main power supply regulator board has damaged. The fault you see as two blinks are its indication.

Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.
Pull up older posts there. Cause for two blinks of standby light with Sony sets are described in detail. Check it.

CHECK IN BIOS MODE ,THIS PC NOT GOES TO STANDBY SO PROBLUM IN YOUR OS .FORMATE PC NOW CHECK .

Time to upgrade to a new monitor try this one I use and love it http://www.amazon.com/ASUS-VK246H-24-Inch-Widescreen-Monitor/dp/B001LYSX12/ref=pd_sim_pc_6

If you have a video card in it, you need to plug the monitor in to that slot not the on board slot.

I changed the D-sub cable for a DVI one and the problem was instantly solved.

turn off everything and restart computer in safe mode,do this by holding down f8 as you reboot,then go in your setting and remove time limit on sleep mode.

check the cmos setting first .

there it may be kept as u said as a problem