Question about Compaq AlphaServer DS10

1 Answer

OPEN VMS 7.3

1. Can anyone tell me where I can get the operating system OPENVMS 7.3 to purchase or download.

2. What are the hardware requirements for that Operating system

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You can get all the hardware that is supported on both HP's Site and the OpenVMS.org site. http://h71000.www7.hp.com/servermatrix.html
and
http://www.openvms.org/pages.php?page=OpenSource

HP has a hobyist section here: http://www.openvmshobbyist.com/news.php

If you just want to see what OpenVMS looks like and play with it in an emulator.

Posted on Apr 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need Windows 7 32 bit drivers for a HP Compaq Presario SR1303WM


HP does not have software or driver downloads available for your computer with Windows 7. HP provides software and driver updates for the operating system that originally came with the computer. Changing the operating system on your computer (upgrading or downgrading), puts the system into a configuration that might not work with the hardware design. If you you must change the operating system, get drivers from the manufacturer of the component you need. For example, if a computer has NVIDIA video hardware and was upgraded to a newer version of Windows, someone would go to NVIDIA's web site to download and install an updated driver.

May 04, 2014 | HP Computers & Internet

1 Answer

My acer aspire one d150 netbook webcam is missing . went to device manager and imaging display is missing . can anyone help with this problem?


Camera is not detected, there are several possibilities:

The first possibility
There was an error installing the driver. AOD150, manufactured by three types of cameras, chicony, liteon, suyin. Example: I installed the camera driver, suyin to AOD150. At the time of installation, a message appears, hardware not found / not detected / not recognize. This means, suyin not the right driver.

Solution

1. Open link driver AOD150
2. Operating System = Microsoft Windows XP Home Edition x32
3. Download software = Hardware Vendor Detection Utility
4. Double-click = HWVendorDetection.exe. We will find the right camera hardware.
5.
Download and install the Liteon driver

11_26_2011_6_53_41_pm.jpg

11_26_2011_6_54_05_pm.jpg

The second possibility
If the hardware vendor detection utility, does not detect camera

Solution 1
(assuming, normal hardware)
1. Possible corrupt operating system.
2. Reinstall the operating system, by doing format drive C.
3. Move all data from drive C to D/E/F.
4. Download drivers AOD150, and other applications, save it on drive D/E/F
5. Insert the Windows CD bootable. Perform boot from CD.
6. Press enter - F8 - New Installation - format the C drive, etc.
7. After the OS install is complete, install all drivers (chipset, LAN, VGA, sound, camera, etc)

Solution 2 (assuming, damage hardware)
Contact Acer Support

I hope this information useful, thank you.

Nov 24, 2011 | Acer Computers & Internet

1 Answer

Download all drivers for my dynabook PC/815ls


They won't do me any good! Besides, what broke for me to help fix?

Try looking up the maker's support website for that, letting your OS (I'm guessing Windows Update over Oracle Solaris Refresh) pick relevant hardware drivers, or perhaps relate the particular OS and build of 815ls you want drivers for, including virtual device drivers, VMs, etc.

Jul 25, 2011 | Computers & Internet

1 Answer

Have upgraded from xp to windows 7 is there a driver


You can download and install the drviers that are available from the website of your computer manufacturer. Please check the computer manufacturer and browse in their websites and download the required drivers that suits for your computer Model.

Windows 7 is bundled with all the required drivers for any computer. Every Hardware device will get the required drivers installed while installing the Windows 7 Operating System. These Drivers drivers are assigned by the Microsoft. However, Unassigned drivers can be downloaded depending on the computer Model.

If you have internet connection in the computer that has the issue, then you can run the Windows update to keep your computer upto date.

May 28, 2011 | Computers & Internet

1 Answer

I'm having 512mb of ram can install .net on this and please send details to install .net package in a system.


Hello For .Net Framework 4.0 following are the pre requisite:-
System Requirements Supported Operating Systems:Windows 7;Windows Server 2003 Service Pack 2;Windows Server 2008;Windows Server 2008 R2;Windows Vista Service Pack 1;Windows XP Service Pack 3 Windows XP SP3 Windows Server 2003 SP2 Windows Vista SP1 or later Windows Server 2008 (not supported on Server Core Role) Windows 7 Windows Server 2008 R2 (not supported on Server Core Role)
Supported Architectures: x86 x64 ia64 (some features are not supported on ia64 for example, WPF)
Hardware Requirements: Recommended Minimum: Pentium 1 GHz or higher with 512 MB RAM or more Minimum disk space: x86 - 850 MB x64 - 2 GB
Prerequisites: Windows Installer 3.1 or later Internet Explorer 5.01 or later
If you fulfill above requirement then go to http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992&displaylang=en
and click on download, you will found other instructions over there
Good Luck, do rate the solution if got help

Dec 31, 2010 | Computers & Internet

1 Answer

I have a COMPAQ 1000 Alpha computer running OPENVMS 7.2 and recently the system has not been able to access the hard drive. I am able to see the device intermittently but it fails after a short period of...


You have not provided much to go on here. Is the system up and running or do you have only a single drive? You should be able to do a "SHO ERR" and see any errors logged to the errlog that will indicate the hardware issue. Using "anal/err" or Clue, you should get the error details. Please post what you find here and I'll provide suggestions.

Dan
(30+ years of VMS experience and still going!!)

Jun 11, 2009 | Compaq Alpha Server 1000, 400MHZ...

1 Answer

DS10 with SBS PCI Expansion


Version 7.1-2 is an older version of the OS. I will have to check, but I think that V7.2 will resolve this. What version of TCP/IP are you using? Back in the day when I supported TCP and VMS, there were some timing issues that causes odd behavior. If you can provide the details about your configuration, I can check and get back to you. If necessary, an examination of a forced crashdump may be needed.

A rare opportunity to work with VMS again!!

Good stuff.
Dan

Aug 01, 2008 | Compaq AlphaServer DS10

1 Answer

OPENVMS 7.3


Hello Narvaar

I believe I've found what you need.

HERE is the OpenVMS home page

HERE is the support page for all the HP OpenVMS versions through 7.x & OpenVMS VAX 7.x

HERE is the support page for OpenVMS 7.x including manuals.

HERE is HP/Compaq's customer support contact information. If the info. and downloads aren't available on the site, customer support should be able to help you.

HERE is their "Questions Before You Buy" contact information.


Please, let me know if you have any difficulty accessing any of these sites or if you have any more questions at all, comments, etc. We're here to help.

Thank you,
BJ @:)

Apr 12, 2008 | Compaq AlphaServer DS10

1 Answer

Driver for scsi disk seagate ST318406LW


Here you go:

http://www.seagate.com/www/en-us/support/downloads/


and read it also it's important for you:


As has been remarked before, "SCSI is a collection of optionally
implemented -- or optionally misimplemented -- features", and the
other classic remark, "None of the S's in SCSI are Standard".

There is typically no requirement for what some platforms might call
a low-level format for SCSI disk devices accessed by OpenVMS.

The volume-level format -- the file structure -- is established with
the OpenVMS INITIALIZE command.

There is apparently a configuration-level or hardware-level SCSI
incompatibility here. That the console can identify the device
means that some simple operations have succeeded -- that the console
has identified the device does not imply that the device will operate,
nor that the device will operate under any particular I/O load.

Please contact your hardware support vendor or storage vendor for
assistance with the requisite integration and testing, and please
also see the OpenVMS FAQ for related discussions of third-party
hardware issues, requirements, testing, and support considerations.

The effort involved in qualification of peripheral devices is large,
and involves detecting, isolating and resolving obvious functional
incompatibilities and obvious errors within the host, controller
or drive interfaces, as well as more subtle considerations such
as ensuring that the particular device thermal-cooling and other
environmental requirements are met. Acquisition of a supported
device is often far cheaper than performing a local qualification,
and particularly when -- such as is the case here -- errors are
encountered. Additionally, if operational problems should arise,
then the supported configurations will typically see the necessary
remediation work.

The device support effort involved can range from trivially simple
to what is effectively cost-prohibitive, and the particular results
and which extreme might be involved are not entirely clear at the
onset of the testing and support effort. Put another way, there
is definite value in the supported device configurations.

Additionall, your OpenVMS version is outdated, and in need of an
upgrade. While the OpenVMS Wizard is entirely unfamiliar with the
rated capacity of this Seagate device, the Wizard will also call
your attention to the maximum disk capacity and storage-ECO-related
information in the OpenVMS FAQ. If you cannot upgrade from V7.1-2,
please make certain that you have all current ECO kits applied.

The OpenVMS Wizard is not in a position to provide device qualification
and device integration assistance at no cost -- having been involved
in this, this effort can involve weeks or months of technical effort;
far beyond what the OpenVMS Wizard can offer. Again, please contact
your hardware support or storage vendor for this assistance, or please
then expect to become of a subject matter expert for SCSI.


Nov 22, 2007 | Computers & Internet

Not finding what you are looking for?
Compaq AlphaServer DS10 Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...