Question about Televison & Video

1 Answer

Samsung HLM507W Blink Lights

My Samsung HLM507W has the three blinking lights. I ordered a new bulb. The old bulb was a BP96-00244-A; they sent a 244-J - they said it was the same. However, the connectors were different. So I took the connectors off the old bulb and put on to the new bulb but the same three blinking lights.

What else might be causing the lights to blink?

When I try to power up, the green light blinks, like normal; then shuts for a second; make a slight whirring sound; recycles the green blink; then after about 60 seconds the three lights blink.

Thanks much.

Posted by on

  • Chip C Apr 13, 2008

    Thanks. That make sense. I am waiting for the BIC company I got the bulb from to respond. That may be the issue. Much appreciated.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 121 Answers

Beings the connectors were different on the new bulb the spark gap maybe different also if it is the lamp wont work in that unit

Posted on Apr 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Originally got blinking lights to indicate a bad bulb. Had a spare bulb that I installed. Now a very loud noise from color wheel and only a black and white picture.


Hi,
Bad color wheel is cause of noise and black and white picture in tv, please replace color wheel to solve the issue.
Required color wheel is available in SamsungParts for $120
Thanks.

May 13, 2011 | Samsung HLM507W 50" Rear Projection HDTV

1 Answer

Hello.... Samsung HL-P5063W Lamp LED blinks approximately 35 times followed by 1 long standby/temp light blink After this all 3 lights remain lit and flash....lamp/standby and timer makes a loud humming...


Sound like ur tv have two problems.The "lamp"LED light flashes,mean ur tv need a new projection bulb.The loud refrigerator sound,mean the tv colors wheel is dead,it spinning off of it axes motor.Hire a tv repairman to do this the colors wheel is hard change,because require take out many machanicals parts even to get to the colors wheel to change.The bulb is easy replaced,but he there pay him to put new one in.

May 26, 2010 | Samsung HL-P5063W 50" Rear Projection HDTV

2 Answers

Samsung hln617w dlp tv won't turn on. Red temp


Had similar problem. Thought it was the lamp. Examined old lamp but it appeared to be good. Ordered a new one anyway. Changed the lamp but the TV screen would not come on. It would make the usual noise as it was going to come on normally but it would cycle 3 times & then turn off. The LED lights in the front panel would indicate a defective lamp. Then read about the ballast. Changed the ballast & still same problem. Tried starting the TV without the lamp installed & noticed that the color wheel did not spin. Removed old color wheel & discovered it was broken. This appears to be the cause of all of my problems. I wish I new earlier of the test-turn on the TV without the lamp being installed & check to see if the color wheel is spinning. Would have save money on the lamp & ballast.

Apr 08, 2010 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

Samsung HLM507W won't stay on. I've unplugged and plugged. Will come on for about 1 minute then shuts off and The three lights come on. Have replaced bulb. Still doing the same thing. What else could it...


the two conergence picture boards have afault and the sensor detects the overload and shuts down. inspect the boards at the rear near the power pack to see if you can detect any burnt capacitors

Aug 30, 2009 | Samsung HLM507W 50" Rear Projection HDTV

1 Answer

My samsung hl-p5067w does not work


I would see if it's the lamp ballast only about $100.00 and easy to replace, it's the part underneath the lamp that fires up the bulb. The light engine itself is over $900 to buy and not worth it! I have same T.V.

Jan 31, 2009 | Samsung HLP5067W Television

1 Answer

New Bulb Doesn't Light


color wheel or light engine,call for service and save your money.

Aug 04, 2008 | Samsung HLN467W 46" Rear Projection HDTV

1 Answer

Samsung HLP5063W DLP


no you do not need a bulb you will need to have the color wheel replaced.

Aug 04, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...