Question about Zanussi FLE1416W Front Load Washer

1 Answer

Washing machine the water will not stop filling the machine THE WASHING MASHING WILL NOT STOP FILLING WITH WATER

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 487 Answers

If you are in the Uk you can order online at this link you need the pressure switch PRESSURE SWITCH (1243905104-FLE1416W (91451453800))
Hope this is helpful. the switch is deffenitly broken.or maybe the hose from the tub to the switch is leaking. check that out first please

Posted on Apr 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine won't stop filling


That sounds like the water supply solenoid valve has failed.

Jul 31, 2014 | Whirlpool Washing Machines

Tip

The washing machine is under filling water?


This problem is due to fault in the Water-level switch in washing machine.
The Water-level switch is the part in the washing machine that senses the filling water in the tub. When the water reaches to its required quantity the Water-level switch sends the command to stop the water supply. But if the Water-level switch is faulty. It will sense the wrong quantity of water in the machine. And makes the water supply stop bit early then required. So washer does not fills with required water .The Water-level switch is located at the bottom of the outer tub in the washing machine. Many a times removing and reconnecting the switch makes it proper. in other cases it needs to be replaced.
These will help. Thanks

on Mar 18, 2010 | Washing Machines

1 Answer

My samsung top loader washing machine sw65v9w won't stop filling with water


If the water stops when you stop the cycle, then the pressure sensor is at fault. If you need to turn the water supply off to stop it, then the water inlet valve is at fault.

Nov 04, 2012 | Washing Machines

1 Answer

Water doesnt stop when filling washing machine


There should be a "fill control" on the panel of the achine that lets you set the fill limit for wash loads ranging from small to large. Obviously, your fill control is not working

Oct 09, 2012 | Washing Machines

1 Answer

F&P washing machine:GW709 doesn't cut out when filling


could b pressure switch tube is blocked or your control board with the pressure switch attached is faulty. empty water from machine, remove pressure switch hose from control board, blow thru tube to remove any blockages, refit tube. turn on cycle, select low water level, push start, after about 30sec"s push start again, that should stop it filling straight away. if the water stops push start again to continue filling. if it doesnt stop filling after restarting the cycle then it is your control module.if the water doesnt stop filling after the 30 sec stop it is the water valves. by the way what country do u live in because $120 seems to b alittle too expensive. please reply 4 more help.

Apr 29, 2010 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

Doesnot stop filling water


To javed_iqb904, does the drum actually fill or does it seem like that water is draining out as it's filling?


To neonllama19, if it fills with the tap on and the machine off, it sounds like a defective water valve. If it never stopped filling it sounds like a defective pressure switch or hose to the pressure switch is loose or diconnected.

Jan 08, 2009 | Frigidaire GLTF1670A Front Load Washer

1 Answer

Washing machine won't stop filling with water


if it keeps filling when unplugged replace fill valve if shuts off ckd pressure switch and hose to switch from tub

Nov 18, 2008 | KitchenAid KAWS750L Top Load Washer

2 Answers

Fill will not stop


you may have a problem with your pressure switch. or sometimes they call it the water level switch.

try to use it in the small level and see if it would stop filling around medium or large quantities of water.

if it would stop filling , then replace the water level sensor.

tnx 4 using fixya,

drcool

Oct 18, 2008 | GE WBB4500EWW Top Load Washer

2 Answers

Washing machine wont stop filling up


see if the water coming in is hot or cold by turning the water faucets off and on to see if one fills and the other dont and replace the valve

Feb 16, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Zanussi FLE1416W Front Load Washer Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

shaun taylor

Level 3 Expert

1454 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...