Question about DISH Network DVR-625 DTV Receiver / 100-Hours Video Recorder

1 Answer

Dish DVR remote control programming Bose Cinemate

I have the Dish DVR 625 and Bose Cinemate Home theater system. Trying to find a code that will work with DISH to program the Bose Cinemate system.

Posted by on

  • 5 more comments 
  • Anonymous May 07, 2008

    I have the same problem for vip 612 DVR from dishnetwork

  • Dean Gammon Sr.
    Dean Gammon Sr. Jun 13, 2008

    I have a Element model FLW-1920B tv,and can't find the remote codes for it.

  • Anonymous Dec 06, 2008

    i have dush network and the bose cinemate digital home theater cannot find a code for the remote. have to use two remotes all the time and is a pain. any resolutions?

  • Anonymous Dec 06, 2008

    i have the same prob having to use 2 remotes and is a pain. any resolutions?

  • Anonymous Mar 12, 2014

    Samsung TV and Bose surround sound

  • Anonymous Mar 27, 2014

    The Dish system crashed, and when it restarted all the recordings had been erased. How can they be restored?

  • Anonymous Mar 30, 2014

    how to program my bose cinemate control into a xfinity xr2 box

×

1 Answer

Your screwed. jk idk

Posted on Apr 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot find a code to control my pace HD-DVR with my Bose Cinemate remote


Hi i have a bose home theater, but now i can find sutaible codes for bose universal control for dstv pvr.

Aug 15, 2012 | TV Receivers & DVRs

Tip

DISH VIP612 Program AUX Remote Code 2


DISH Solo DVR VIP612 Program AUX Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your receiver, tuner, stereo, second TV or second VCR using your remote's AUX mode? (Instructions to setup a primary TV or a VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a device with the AUX mode:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR VIP 612 User Manual.
  3. Press and hold the AUX mode button until all the other buttons light up, and then let go. The AUX mode button will flash.
  4. Press 0 for a TV, 1 for a VCR, or 2 for a receiver, amplifier or tuner.
  5. Enter one of the three-digit codes from the tables in the manual.
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 7 with the next device code from the tables in the manual.
Your device control codes for your amplifier or other AUX device are now programmed into your DISH Solo DVR ViP 612.

Now you probably want to set your Dish Solo DVR VIP 612 Universal Remote up so that it always controls the volume of your stereo, rather than of your TV, regardless of whether it is in SAT, TV, VCR or AUX mode. Help for this remote control programming can be found here.

(Help for programming a TV or VCR using the TV or VCR mode buttons can be found here.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | TV Receivers & DVRs

Tip

DISH VIP612 Remote Code Scan


DISH Solo DVR VIP612 Remote Code Scan

7c06801.jpg


Would you like to autoscan program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your TV, VCR, receiver, or stereo?


e818a57.jpg

To auto-program device codes into your Dish Solo DVR VIP 612 Universal Remote by searching for the code, follow these steps:

  1. Turn the device you would like to control on.
  2. Press and hold the mode (TV, VCR, or AUX) button until all the other buttons light up, and then let go. The mode button will flash.
  3. FOR AUX MODE ONLY - Press 0 for a 2nd TV, 1 for a 2nd VCR, or 2 for a receiver, amplifier or tuner. Then press the STAR (*) button.
  4. Press POWER to put your remote into scan mode.
  5. Press the UP or DOWN ARROW repeatedly until your device turns off. Each arrow press tries the next code your remote knows for your selected device type. When your device turns off, you have found a compatible code. When the remote runs out of codes to try, the device will flash rapidly eight times.
  6. Press POUND (#). The mode button will flash three times as it stores the found code.
  7. Turn the device back on and try some of the other buttons to make sure they work. If all functions work, your remote has been successfully programmed.
  8. If the code didn't work, repeat this scanning procedure to find a more compatible code. When your device turns off during your next scan, press the arrow key again until the device turns back on to signify you have found the next compatible code.
Your device's remote control codes for your TV, VCR, or receiver are now programmed into your DISH Solo DVR ViP 612 remote control.

(The other way to program your DISH Solo DVR ViP 612 remote control is to look at the tables in back of the user manual, and enter the code directly.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | TV Receivers & DVRs

1 Answer

Trying to program bose univeral remote to control vip622 dvr. I have tried the codes bose suggested.


Hi my name is Mike Houston a Social Media Representative at DISH. I see you have a Bose universal remote and you want to program it to your VIP622 DVR. We do not have codes to setup other remotes to our DISH equipment. With our SD/HD receivers they are installed with a DISH universal remote that can control many different components including a Bose system. If you have any further DISH questions please e-mail me at michael.houston@dish.com

Jul 11, 2012 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

I need to program my URC-4220 ONE FOR ALL remote to operate my new dual dishnetwork dual dvr for tv number 2. Help


tamiwalsh333

With the TV 2 remote, it needs to be a UHF type remote. Since the signal goes through solid objects (walls, etc.), you should check to see if this remote has that capability. I have provided codes you can try to program the remote to the receiver. I hope this helps.

Dish Network
System 0775, 1005, 1505, 1775

Ray Calo
DISH Network

Aug 17, 2009 | DISH Network DVR-625 DTV Receiver /...

Tip

DISH VIP612 Remote Code Scan


DISH Solo DVR VIP612 Remote Code Scan

7c06801.jpg


Would you like to autoscan program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your TV, VCR, receiver, or stereo?


e818a57.jpg

To auto-program device codes into your Dish Solo DVR VIP 612 Universal Remote by searching for the code, follow these steps:

  1. Turn the device you would like to control on.
  2. Press and hold the mode (TV, VCR, or AUX) button until all the other buttons light up, and then let go. The mode button will flash.
  3. FOR AUX MODE ONLY - Press 0 for a 2nd TV, 1 for a 2nd VCR, or 2 for a receiver, amplifier or tuner. Then press the STAR (*) button.
  4. Press POWER to put your remote into scan mode.
  5. Press the UP or DOWN ARROW repeatedly until your device turns off. Each arrow press tries the next code your remote knows for your selected device type. When your device turns off, you have found a compatible code. When the remote runs out of codes to try, the device will flash rapidly eight times.
  6. Press POUND (#). The mode button will flash three times as it stores the found code.
  7. Turn the device back on and try some of the other buttons to make sure they work. If all functions work, your remote has been successfully programmed.
  8. If the code didn't work, repeat this scanning procedure to find a more compatible code. When your device turns off during your next scan, press the arrow key again until the device turns back on to signify you have found the next compatible code.
Your device's remote control codes for your TV, VCR, or receiver are now programmed into your DISH Solo DVR ViP 612 remote control.

(The other way to program your DISH Solo DVR ViP 612 remote control is to look at the tables in back of the user manual, and enter the code directly.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

Tip

DISH VIP612 Program AUX Remote Code


DISH Solo DVR VIP612 Program AUX Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your receiver, tuner, stereo, second TV or second VCR using your remote's AUX mode? (Instructions to setup a primary TV or a VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a device with the AUX mode:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR VIP 612 User Manual.
  3. Press and hold the AUX mode button until all the other buttons light up, and then let go. The AUX mode button will flash.
  4. Press 0 for a TV, 1 for a VCR, or 2 for a receiver, amplifier or tuner.
  5. Enter one of the three-digit codes from the tables in the manual.
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 7 with the next device code from the tables in the manual.
Your device control codes for your amplifier or other AUX device are now programmed into your DISH Solo DVR ViP 612.

Now you probably want to set your Dish Solo DVR VIP 612 Universal Remote up so that it always controls the volume of your stereo, rather than of your TV, regardless of whether it is in SAT, TV, VCR or AUX mode. Help for this remote control programming can be found here.

(Help for programming a TV or VCR using the TV or VCR mode buttons can be found here.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

1 Answer

Hooking Up Panasonic sc-ht670 home theater to Dish DVR 625 and Panasonic TH-42PHD7UY Plasma TV


You will need to run a set of audio cables from the TV1 output on the rear of the 625 directly to one of the three audio inputs on the surround system. Thanks for using Fix Ya.

May 13, 2009 | DISH Network DVR-625 DTV Receiver /...

2 Answers

Remote control


this is not a great idea, youcan program your dish remote to your tv though,

Feb 19, 2008 | DISH Network DVR-625 DTV Receiver /...

Tip

DISH Solo DVR VIP612 Program TV VCR Remote Code


DISH Solo DVR VIP612 Program TV or VCR Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR 612 to control your primary TV or a VCR? (Instructions to setup a receiver, tuner, stereo, second TV or second VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a primary TV or a VCR:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR 612 User Manual.
  3. Press and hold the mode button (TV or VCR) until all the other buttons light up, and then let go. The mode button will flash.
  4. Enter one of the three-digit codes from the tables in the manual.
  5. If you want to program Limited Mode, press 1. If not, skip to the next step. (You can add or remove Limited Mode later.)
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 8 with the next device code from the tables in the manual.
Your device control codes for your TV or VCR are now programmed into your DISH Solo DVR VIP 612.

Help for programing a tuner, receiver, 2nd VCR, or 2nd TV using the AUX mode button can be found here.

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

Not finding what you are looking for?
DISH Network DVR-625 DTV Receiver / 100-Hours Video Recorder Logo

909 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network TV Receivers & DVRs Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Geoff

Level 3 Expert

413 Answers

Are you a DISH Network TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...