Question about Netopia (3347NWG-VGX) Wireless Router (3347NWGVGX)

1 Answer

Connecting to computer

I have the Netopia wireless 3400 series, and I need to no how do I connect to my computer so I can have access to internet. I have the 12volt cord, what do I need? thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 221 Answers

If there are additional ethernet ports (looks like a large phone cord port) on the back of your router, you can connect one of the ethernet ports on the back of the router with the ethernet port on the back of your computer, using a patch cable, which is category 5/5e cable with the large phone plugs on each end.

Or, you will need to purchase a wireless adaptor for your computer, preferrably a Netopia brand.

Posted on Apr 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to find a driver/sortware program to get my netopia 3D reach wireless adapter up and running. all i can find are these driver scans that want me to install them and scan my computer to tell me I...


Here's a driver-free, software-free solution.

Turn your cable-modem (or DSL-modem) off.
Turn your Netopia off.

Connect:

Ethernet--port on cable-modem <-- cable --> WAN port on Netopia.

One LAN port on Netopia <-- cable --> network-port on your computer.

Turn the cable-modem on, and wait until its lamps settle-down to a repeating pattern.

Turn the Netopia open, and wait until its lamps settle-down to a repeating pattern.

Restart your computer.

Click Start
Click Run
Type CMD
Press Enter
Type IPCONFIG
Press Enter
Look for output like: Default Gateway ... 192.168.123.456
Start Internet Explorer
Type http://192.168.123.456 (or whatever numbers you see)
Login to the web-server running "inside" the Netopia.
Click to run the "Wireless Networking Setup Wizard".
Enter an SSID of your choice.
Select the 'WPA' level of encryption.
Enter a network-password of your choice.
Click OK
Restart the router (if it did not automatically restart).

Disconnect the Ethernet cable from your computer's network-port.
Click "View Available Wireless Networks".
Click the SSID of your new network.
Click Connect.
Enter the password, when prompted.
Voila! You have a wireless connection to the internet.

Oct 24, 2010 | Netopia 3-D Reach (TER/GUSB-N1)...

1 Answer

After hibernation of my computer I can get only local access


i am sorry i cant help with that, but you can try not making it hibernate, but standby.

Jul 26, 2010 | Netopia 2247NWG-VGx Wireless Router...

1 Answer

Netopia Gateway has internet connection,can ping,but no web pages


Connect directly to your ISP by what ever method. Get Network Magic from Cisco. Download the free evaluation copy and run it. Reintroduce your router and let Network Magic help you solve the trouble. It may be that your firewall is too tight.

I hope this helps you

a
a

Sep 21, 2009 | Netopia 3347W-KIT ADSL Wireless Gateway,...

2 Answers

I have a netopia wireless router, I've just had comcast install the internet however I would like to install the router. the modem to my computer accommodate only one ehternet cable at a time and it...


You can connect your computer to Internet if you have a Wi-Fi card in the computer. You need to connect the modem ethernet cable to the netopia wireless router and then connect to internet through wireless connection. First task is to configure wireless network connectivity on your netopia router connecting the 1st ethernet port to your pc lan card port, you will need the netopia instruction manual for this. The wireless configuration will be through a browser window(like internet explorer/mozilla firefox). This may take roughly 20 -30 minutes.

Jul 25, 2009 | Computers & Internet

2 Answers

How can i connect my laptop to internet without router device via desktop pc connected to internet


you could its called an ad-hoc connection..but youneed either a wireless adapter on your desktop or a network hub

Apr 29, 2009 | ASUS Wi-Fi@HOME (WIFIG80211G) 802.11g/b...

1 Answer

Wireless Internet Connection Being Blocked


Do they have there security setup to match your netopia? If your not sure surf to the modems interface 192.168.1.254 go to expert mode and make sure the wireless settings match the settings (wep,wpa, 128 bit or 64 bit,open, shared key, etc..)on the laptop if not change them in the laptop

Nov 15, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)

3 Answers

Netopia Router - No Connection, Clicking


Yes, you need to swap the router out.

This is assuming you dont have the netopia in bridge mode with another device behind it.

spin

Jun 26, 2008 | Netopia 3346N-ENT Router (3346NENT)

2 Answers

How can i unlock my router?


Firstly... avoid showing your SSID (eircom-123456789) here, as the WEP key can be reverse engineered from the SSID.

To change your SSID, connect your router to your PC with an ethernet cable, go to your web browser (Intenet Explorer, Forefox, etc) and type 192.168.1.254, and press return.

This will open the control panel for the router.
Select 'EXPERT MODE' from the menu on the right, and accept the warning prompt. Then click on 'CONNECTION' and the 'WIRELESS' on the menu on the right.

In the main window you can then change the SSID for your network.

You can also change some of the other options in this window such as enabling closed mode, change security protocol, password, etc.

Feb 13, 2008 | Netopia 2247NWG-VGx Wireless Router...

5 Answers

How can i unlock netopia 2247NWG


Firstly... avoid showing your SSID (eircom-123456789) here, as the WEP key can be reverse engineered from the SSID.

To change your SSID, connect your router to your PC with an ethernet cable, go to your web browser (Intenet Explorer, Forefox, etc) and type 192.168.1.254, and press return.

This will open the control panel for the router.
Select 'EXPERT MODE' from the menu on the right, and accept the warning prompt. Then click on 'CONNECTION' and the 'WIRELESS' on the menu on the right.

In the main window you can then change the SSID for your network.

You can also change some of the other options in this window such as enabling closed mode, change security protocol, password, etc.

Feb 10, 2008 | Netopia 2247NWG-VGx Wireless Router...

Not finding what you are looking for?
Netopia (3347NWG-VGX) Wireless Router (3347NWGVGX) Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Computers & Internet Experts

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

John Hong
John Hong

Level 3 Expert

769 Answers

Are you a Netopia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...