Question about Nokia 3230

2 Answers

Camera not working

When i enter the camera a message appears which says : feauture not supported ?

Posted by on

  • Haseeb92 May 05, 2008

    ya i also have this problem

    it says feature not supported

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 124 Answers

HI dude,
I will help u in this problem.
I think the required files/data for camera is erased due to virus in ur cell phone. I recommend u to format ur phone memory and memory card. It also dont erase the phone softwares and apps it came with. It only erases additional datas added later.
To format ur phone memory :

1) Make sure ur charge is 75 %. Turn off ur phone.
2) press and hold three buttons ( green dial button + * + 3 key ) and turn on the phone.
3) Hold those buttons until a formatting screen appears.
4) It automatically completes and ur phone asks for restart.
5) Ur phone memory is completely formatted.
To format MMC (memory card):
- Make sure ur charge is 75 % or more.
- Open menu->extras->memory card->format.
- Takes ( 15-20 ) minutes.
- Ur MMC is formatted now.
===============================================
Please send me a feedback and rate my solution.
Be sure to post a clarification request for ur problem after it is solved.
===============================================
SAJAN(sajwhat_2003@yahoo.com/sajwhat@hotmail.com)

Posted on May 10, 2008

  • Anil Dhawan Jun 12, 2011

    Hi,
    I did the above procedures, but still am not able to open my Camera, and getting the same error message "Feature not Supported". Please help me in this

    Thanks,
    anil

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
I did the above procedures, but still am not able to open my Camera, and getting the same error message "Feature not Supported". Please help me in this

Thanks,
Arun

Posted on Jun 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My phone nokia 6110 navigator - the front camera not working it come msg ( General: Feauture not supported) pleas help me how to solve it Thanks Yaser


Hi,when the camera flex that allows the camera to display images is damaged,messages like this comes up. Soyou will need to replace the camera.

Have a nice day.

Sep 01, 2010 | Cell Phones

1 Answer

Engine system service requested message means?


on Most cars it means to take it in for routine maintenance, Oil change etc. A lot of newer cars have this feauture to remind you to do the oilchanges.

Feb 05, 2010 | 2005 Volvo S40

1 Answer

Message turn power off and on again


your lens may be jamed thats why it tells you to turn off then on its tring to cycle the lens so i would check that first! good luck!

Sep 02, 2009 | Sony Cyber-shot DSC-M2 Digital Camera

2 Answers

Message PLEASE TURN CAMERA OFF THEN ON AGAIN


Sometimes this message appears when force has been applied to the lens. Here are some things to try. Go into the setup menu and find "reset" to reset the camera. If that doesn't work, remove the card and battery...press all the buttons...insert the card and then the battery. You may have a lens problem that can only be repaired at a service facility.

Aug 13, 2009 | Panasonic Lumix DMC-TZ1 Digital Camera

1 Answer

Rebel XS ERR99


This is something I found when googling your problem.

Thank you for contacting Canon product support. I'm sorry to hear that
your EOS 10D is displaying an "ERR 99" message.

To isolate the cause of the issue, we suggest that you do the
following:

1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 20 minutes.
4. Insert a fully charged battery, and turn on the camera.

Does the "ERR 99" message appear? If it does, then the camera should
be serviced. If it does not, then please proceed to the next set of
steps:

1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.

Does the "ERR 99" message appear? If so, then the CF card is the most
likely source of the issue. Try using a different card.

If the message does not appear, please complete the following steps:

1. Turn off the camera.
2. Clean the lens contacts by gently rubbing them with a pencil eraser
or soft cloth. Be careful that you do not let any debris fall into the
camera body.
3. Reattach your lens.
4. Turn on the camera.

If the "ERR 99" message only appears when one particular lens is
attached, then that lens should be examined by a service technician.

If you see the "ERR 99" with a different Canon lens attached, then the
camera should be serviced.

May 25, 2009 | Canon Cameras

1 Answer

Date and Time settings.


Menu thing, not difficult on kodak, open menu , go down list and select time feauture, select that.

Apr 16, 2009 | Kodak EASYSHARE M1063 Digital Camera

2 Answers

Nokia 6110 navigator rear camera not working


I have the same problem and i know what it is. There is a little tiny switch and it turns on Camera when u slide cover down and it is broken. You should take your phone to repair or buy spare part https://www.oemcellphoneparts.com/products/Nokia-6110-LB-Flex-Assembly.html and fix it yourself.

Dec 25, 2008 | Nokia 6110 Cellular Phone

1 Answer

Message appears but can not remove files


you can download manuals and software from
http://support.jvc.com/consumer/support/index.jsp

the camera should basicly appear in 'my computer' or in 'computer' as its called in vista these days. Other than that
try to import video - on windows media maker.

Jun 08, 2008 | JVC Everio GZ-MG30US Camcorder

Not finding what you are looking for?
Nokia 3230 Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

Clive Gray

Level 3 Expert

1479 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Nokia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...