Question about Televison & Video

1 Answer

32 Sony Wega...Audio but no Video...Flashing Standby light

I just moved, and when I plugged the TV in and turned it on, I can hear audio, but no video. I can change channels just fine, just no picture. Does it need to be repaired? It is about 9 years old.

Posted by on

  • Anonymous Apr 12, 2008

    I have no picture for 9 minutes, but audio is ok and I can change channels. There is a red led which flashes 5 times then turns steady green for 3 seconds before flashing red again. There is no fault once the picture arrives, the set works ok. Mine is a KV-32LS35U

  • KEN-IAH Nov 03, 2008

    I have the EXACT same problem

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,667 Answers

If the set is taking a long time to start, most likely something is failing. In this particular model, as the CRT ages and becomes weak, the set will be slow at starting. The electron-gun emission must reach specific emission specs before the AKG circuits allow it to be biased on.

Also with age, the electrolytic capacitors in the power supply and various drive circuits tend to go off value, and or become thermo sensitive.

You may want to start considering to invest in to a new TV set very soon.


Jerry G.

Posted on Apr 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video goes off led blinks 5 times then video returns, audio ok


  1. Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly. For more details, check this.

Jan 08, 2013 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

32 inch sony trinitron wega


It will most probably need an overhual of the power supply

Mar 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony trinitron 32 inch television model no. KV-32FS13 doesnt have any video nor audio and standby light just blinks about 4 times


Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check for any loose sodering points at the vertical output section.

Mar 27, 2012 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My Sony tv will not turn on. The standby/timer light keeps flashing red.


Problem with the Sony Trinitron KV-J16PF 20" TV The standby/timer light keeps flashing red

Jun 07, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony Trinitrion WEGA starts then stops,then timer light flashes eight times.


  • Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high voltage circuits are defective on the D board.
Have you got external loudspeakers that have dodgy wiring? Just a thought.

Jan 15, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

TV repeatedly goes into standby mode and then comes back on


Resolder Horizontal section & SMPS Power Supply with Soldering Iron

Jan 02, 2010 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

Flashing light


The LED used in most tv are dual color led,some have two lead, some have three. try to find the same size and replace it.

Jun 20, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony Grand Wega KF50WE610 Video/Audio disappears every 1-2mins


Hello apharcha,
99.99% its the lamp. You may also have a faulty door, but thats kinda just 2% possibility. Change the lamp...its due anyway.
List Price $200.00
Part Number A-1606-034-B Description LAMP BLOCK XL2100U
65dc0a9.jpg
Best regards
circuitcity

Jun 08, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

2 Answers

SONY - TRINITRON 26" TV (PICTURE TUBE TYPE)


I have the exact same problem! I'm assuming it's time for a new tv.

Oct 21, 2007 | Sony FD Trinitron WEGA KV-32HS500 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...