Question about Computers & Internet

1 Answer

Sagem dbox how do i retune it to get my channels back

Posted by on

  • 15 more comments 
  • RVinDub Apr 12, 2008

    Hello, I have a sagem dbox2 and I lost all my channels!
    It seems that this problem happened to a lot of people!
    How can I fix it?
    Any code? Any update?....Any help?

    Am living in Dublin.


  • akdp Apr 13, 2008

    sagem d box virgin media lost all channels.can you help? box is three year old.

  • Donna Graham Apr 13, 2008

    My Sportstar Sagem D-box is only showing terristerial channels. My supplier is virgin media ! ! Any solutions yet ! It is driving me crazy without my trusty d-box ??

  • janicemg Apr 13, 2008

    Our d box went down last week and a friends, all with Virgin Media cable tv - has anyone come up with a solution yet?

  • shezasingh Apr 13, 2008

    Sem problem only free channels work, got Sagem dbox 3 years old with Neutrino software, cable provider Virgin....Wolverhampton

  • Anonymous Apr 13, 2008


  • des4961 Apr 20, 2008

    ive only got normal tv channels + a couple of other channels ive rescanned it but still no extra channels

  • mogill Apr 20, 2008

    my sagem dbox has gone down.

    I think it needs to be flashed,but i don't know how to.

    Can someone help please.

  • Anonymous Apr 21, 2008

    yea i have the same problem dbox went down sagem on virgin/media any one found a solution yet help pls billyboy

  • Anonymous Apr 24, 2008

    lost all channels apart from free wiew ones

  • spud2466 May 27, 2008

    im getting nothing through my box . tried 2 rescan but doesn't seem 2 work.

  • jagdish_be Sep 13, 2008

    i have a sagem dbox2 it has been working fine,untill last week i went away for a few days,and when i got back i cant view any channels, the channels just stoped. i have done a rescan but channels r not coming it display waiting for time. can someone help me set my box back up,or tell me where to get it done

  • larry doyle Oct 09, 2008

    having to recode it several times daily

  • Anonymous Nov 08, 2008

    i have 2 dbox wont work they did when i got them so i reckon someone to call out or ilol drop out

  • twigster ffc Nov 27, 2008

    all channels down apart from free view

  • lonestones Dec 01, 2008

    my dbox seems not to be workin all cable boxes have went down

  • Anonymous Dec 09, 2008



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to get the patch for it

Posted on May 15, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can I use AT&T 2701HG-B 2W Wireless Gateway DSL

yes, you can use them together. they'll find each other at protocol layer 2 (bridge) and layer 3 (router),
and route packets appropriately. Check their manuals to make sure that their HTTP management page ip addresses are different - say for one router and for the other - so that you
can manage them separately without disconnecting them.
You'll want to manage them separately to assign them different wireless-N channels. Channel 6 is
the default, and allowing both to compete on the same channel is a bad idea - give each its own
wi-fi channel. There are 11 wireles 802.11n channels, labeled 1-11.

Diagram: DSL === AT&T 2701HG-B ---------- NetGear router --------------- desktop computer

Each link in the diagram above is an ethernet (802.3 10baseT) cable (except the DSL cable,
which is twisted pairs), and wireless devices can
hop onto the Internet by wirelessly connecting to either the AT&T 2701 or the NetGear router.

Jul 08, 2011 | Gateway Computers & Internet

1 Answer

I need a driver for Sagem fast 800 E3 adsl modem for WINDOWS 7. I live in France and neither Sagem or Fr Telecom in France can help me.

Why not put it in the bin and get a self-contained modem-router?
No drivers will be needed and your problem will instantly disappear.

Mar 16, 2010 | Computers & Internet

2 Answers

I try to connect my shaw internet box to my ps3 but it doesn't work

I had the same problem with my sagem modem connecting to my PS3 when I first bought my PS3. I doubt it's your modem, you have to make sure that you have completed the PS3 network setting correctly. Modem name, ISP, DSL, IP address etc...

Jan 09, 2010 | Arris SURFboard® SB5101 Cable Modem

2 Answers

Problem with my Arris Comcast cable modem.

I just had a tech out yesterday regarding this problem on a TM402 - restarts under high network saturation (big uploads or downloads). According to the tech, this is a know issue. Comcast upgraded their network to support multiple carriers (called channel bonding) dynamically. Due to this upgrade, when your modem is demanding high bandwidth for large downloads, essentially, it requests an additional carrier (or channel)...when that request is initiated, the modem's hardware (and firmware) can't connect to more than one channel at a time, therefore, it "gets confused" and restarts itself to attempt to fix the problem. I upgraded to the TM602, and the problem is still there. This is because the channel bonding feature requires a Docsis 3.0 capable modem. The Arris TM702 is the first in the Arris line to offer docsis 3.0. I called Comcast and they are upgrading me to the Arris TM702 (which is a 50M down/10M up service, btw) for an additional $30/month - well worth it for the stability which I require.

As far as Comcast saying that it's fine, call them back with the information I provided, and ask to get you to a tech who can better service your needs...unfortunately, the "tier 1" techs don't have a clue.

Nov 20, 2009 | Netopia (3342) Modem

2 Answers

I am unable to connect to my VPN, although my wireless connection is excellent

Double check that you are using the proper WEP key and VPN settings. You can also try using a different channel for your wireless. Many of these systems use Channel 6 as the default channel. Change this to channel 10 in the router. If you are forcing 105mbs you will need to change that to automatic to make this change as in forced 105 mode the only broadcast channel to use if 6.

Oct 10, 2009 | Arris SURFboard SBG900 (49402201900) Modem

1 Answer

2wire modem is not brodcasting wireless

Usually 2WIRE modems are automatically configured to broadcast wireless. If your modem is not broadcasting it can be due to a few minor D.I.Y issue.

1. Access your gateway address E.g in most cases
, access wireless settings, scroll down to see if the ENABLE SSID is checked. If it is not checked, check it and submit settings. Try searching for wireless again and it should appear in your wireless networks

2. Check your wireless channel if its in the default channel. By default it should be in channel 6. Too high channel will not broadbast wireless networks. E.G Channel 13 will not broadcast wireless. Even it does the wireless will not be strong enough.

Hope this may help and solve your problem

Jan 14, 2009 | 2wire (1000-000057-000) Modem

2 Answers


That should be plug and play.

I would check with Motorla and see if there have been issues with it.

Jun 11, 2008 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

1 Answer

Flash a dbox

There are 2 ways to Flash a d box
One Via an FTP client Like Flash FXP
Or the second Via Image Flashing Assistant
Both Programs along with all D Box 2 images can be found below .....Paul

Apr 24, 2008 | Computers & Internet

1 Answer

Modem retun code

Information, Help, and Drivers related to Computer Modems ATI0 = Return Product Code ATI1 = Return memory (ROM) checksum ... ATI4 = Return current modem settings ATI5 = Return NVRAM settings ...
Modem AT Strings and Commands In - Identifies the modem code and the status of the ROM 0=display 3-digit ... and return to command mode after losing DTR; 3=Reset after losing DTR.

Good Luck, Please dont for get to Vote/Thank You.

Dec 19, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

98796 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides