Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

1 Answer

No communication I am not computer savvy. Until recently, the only storage medium I used was a floppy. Yesterday, I placed a Cruzer Micro USB 2.0 flash drive into my office computer, I used the tour launchpad function and opened programs to view them. I attempted multiple times to close every program before ejecting the flash drive. In desperation, I ejected the drive even though I continued to get an error message cautioning me about the loss of data. Now, My flash drive will not light nor work on my home computer. Is the flash drive destroyed?What should I do to make it work again? Janet

Posted by on

  • JWMa Apr 14, 2008

    I have the same problem. My 2GB SanDisk was working fine (had saved a document to it 1 hr prior). I left disk in place and MS WORD running while I made phone call. When I tried to save current doc to SanDIsk, I couldn't get the computer to recognize it (tried all USB ports and another computer). So, what now?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Is it displaying in device manager or it is not at all detecting. In that you may try with it some other system and same problem persist, there is possiblilty for damage. send it for warranty calim. Pen drive easily does not die. Check it in other system.


Any application or data is talking each other with computer and usb drive, then it gives warning try to close all application or any virus infection is there.

Posted on Apr 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reformat a flash drive


Hi jabbbbbb6,
The Cruzer Micro is a flash storage device that connects to your computer's USB port. It comes in various sizes and fits on a keychain. If you want to erase the drive, you can perform a reformat from within Windows' Disk Management utility. After you reformat the drive, you do not need to reinstall any drivers because Windows automatically detects the device.


To Reformat, please follow the instructions:
1. Insert the Cruzer Micro to an available USB port on your computer. Right-click "Computer" and select "Manage." Click "Disk Management" under "Storage" on the left pane of the window.
2. Right-click your USB drive on the list of drives and select "Format." Select a name and file system type for your drive.
3. Click "OK" to reformat the drive. Click "Start" and "Computer" to access your drive.

Rate this accordingly.

Hope it helps.
Thank you for using Fixya.


Oct 06, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I unplugged my USB before it was finished ejecting, and now when i plug it in neither my mac nor my PC recognize it, as in in it doesn't light up or even register that it's plugged in at all. It's as...


There are several reason why your flash drive is not working. You can try this and see if it will work:
STEP 1 - Connect the Cruzer to the PC

If you receive a "USB Device Not Recognized" error on the computer, the flash drive is most likely failed. Additional troubleshooting is unlikely to correct the problem.
id10_not-detected.gif


STEP 2 - Check under Device Manager
1. Right-click My Computer, and select Manage.
id107-1.gif

2. Click Device Manager on the left pane.
id10-2-3.gif

NOTE: The Cruzer might show up under several places under Device Manager such as:
1. Disk Drives
2. DVD/CD-ROM drives
3. Universal Serial Bus controls as USB Mass Storage.

If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers.
id10-2-note.gif


STEP 3 - Refresh the drivers
1. Right-click on the entry with the error mark, select Uninstall.
id10-2-4.gif

2. On the top menu, click Action then select Scan for hardware changes.
id10-3-2.gif


STEP 4 - Verify if the flash drive is detected
1. Double-click My Computer.
2. Look for the Cruzer under devices with removable storage.

Feb 15, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

How to use this divice?


Plug it in to a USB port on your computer. If you now go to 'My Computer' you will now see it as a removable drive. You can treat this as any other storage medium, so you can copy files to it and retrieve data just as you would from any other drive.

If you need more instructions please post a comment and I will help you further.

Jan 25, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

When I plug in the flash drive it lights up but doesn't show up as a drive in "my computer". If I start the device manager (which shows the cruzer device as a funtional drive), disable it and...


STEP 1 - Connect the Cruzer to the PC

If you receive a "USB Device Not Recognized" error on the computer, the flash drive is most likely failed. Additional troubleshooting is unlikely to correct the problem.
id10_not-detected.gif


STEP 2 - Check under Device Manager
1. Right-click My Computer, and select Manage.
id107-1.gif

2. Click Device Manager on the left pane.
id10-2-3.gif

NOTE: The Cruzer might show up under several places under Device Manager such as:
1. Disk Drives
2. DVD/CD-ROM drives
3. Universal Serial Bus controls as USB Mass Storage.

If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers.
id10-2-note.gif


STEP 3 - Refresh the drivers
1. Right-click on the entry with the error mark, select Uninstall.
id10-2-4.gif

2. On the top menu, click Action then select Scan for hardware changes.
id10-3-2.gif


STEP 4 - Verify if the flash drive is detected
1. Double-click My Computer.
2. Look for the Cruzer under devices with removable storage.



SOLUTION 4 -
There might be a conflict in drive letters, see Resolving drive letter conflict.

Oct 26, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Sandisk Micro 4GB Cruzer usb flash drive has malfunctioned and all the computers that I've used it on will not recognize it. Help now!


you can try run check hard drive changes,
and let the O/S pick it up, if not pick from the list of hardware devices, choose
usb mass storage, click on it and look for the maker name, pick your model.

if this those not work, run the driver from the cd that came with the USB device.

if not you will have to go for a update from O/S provider.

May 21, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I just bought a new computer and I need to transfer files


A SanDisk Cruzer Mini is a memory stick, like a modern floppy disk. Plug it into a USB port (a thin rectangular hole) - it may be at the back of your computer. Your computer should then recognise it and you can copy files onto it.

May 06, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Scandisk Cruzer has loaded but can't be seen in My Computer


1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW_2.2.3_MASTER.exe

2. Format

(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)

Apr 04, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

2gb micro cruzer causing the pc to restart


Do you have another USB device which you can use to check if it will come up with the same problem? There are 3 things which could cause it to freeze and restart. It could be a problem with the software device driver needed to detect the USB micro cruzer, the USB port itself or it's the USB micro cruzer. One good thing worth to try is plugging your USB micro cruzer on another computer to check if the problem will also occur there. If it does, then it's isolated to the USB device. If there's no other computer available, 1) Try to run an anti-virus and anti-spyware scan on your computer, 2) start up your computer on safe mode and try to check if it'll occur there as well. 3) If it doesn't occur under safe mode and your able to access your USB device, try to run an anti-virus and anti-spyware scan on your USB device to check for problems there. 4) If all else fails, then it could be a problem with the USB device. hope this helps.

Jan 02, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

3 Answers

Usb cruzer micro and other usb storage devices malfunction and not recognized by the computer.They all work well with other computers - I've tried already to update every driver and firmware but with no...


Could you give me information on the computer your using? I'd need the mother board manufacturer, the bios manufacturer, the bios revision number, The operating system your using, The revision number of your operating system, And is it only usb storage media that your having trouble with, or does your issues include usb imaging devices?

Nov 30, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

laikexpert
laikexpert

Level 3 Expert

281 Answers

CiNi

Level 2 Expert

144 Answers

Are you a SanDisk Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...