Question about AOC LM729 17" LCD Monitor

1 Answer

AOC spectrum 7 Glr ?

I was trying to adjust the brighness on this monitor using the dial. When I pushed the recall and the recall 9300k temp the screen went totally dark to where I could not read the dial menu. Had to keep turning it and pressing in the dark until I got a faint view of the menu. How can I get it back to the default settings. Afraid to touch anything for fear it will go dark again. What are the default settings.

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Initially, I would suggest that you do a full reset, that is unplug the monitor from the mains and the PC for a couple of hours (preferably overnight). The idea is that the monitor will reset itself to default factory settings. Thereafter try again.

Should problem persist, pls post back.

Hope this be of initial help/idea. Pls post back as requested, how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Apr 15, 2008

  • Louie  Role
    Louie Role Apr 29, 2008

    Any development(s) with your monitor?

  • Louie  Role
    Louie Role Apr 29, 2008

    Pls don't respond. Just wondering how to remove this post/thread in "Unsolved Problems from My Askers", Tnx

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reduce the brightness of my AOC monitor?


If you are using windows XP :

1.Right click on desktop
2.Properties
3.Settings
4.Advanced

Windows 7:

1.Open Display Color Calibration by clicking the Start button , and then clicking Control Panel. In the search box, type calibrate display, and then click Calibrate display color. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

2.In Display Color Calibration, click Next to continue

Aug 01, 2011 | AOC Monitor

1 Answer

I am trying to connect and use my monitor as a tv moniter how do i do that


The only way possible i believe that that model aoc. is to use what we call a break out cable, this is a cable used to attach vga on one end and component or rca on the other end, the only issue is that the aoc 912sw has no audio outputs so what ever source you wanted to use to push the image on your tv must also have audio and external speakers must be used. here is a link to a breakout cable break out

May 29, 2011 | AOC 912SW-1 Monitor

1 Answer

I hooked my new aoc 20' monitor up to our emachine and cant find my cd i got with the monitor to download. the monitor will go out on me few times during the day for no reason so am thinkin i need to...


You do not need the driver for the monitor if you are running XP, if you are running Windows 7 you will need the driver so you can adjust the resolution to the native resolution of the monitor.
Lack of driver for the monitor will not cause the black out problem.
You should try this monitor with another PC first to make sure it is not video card problem in the PC.
Is this monitor still under warranty.

AOC driver download from AOC:
http://us.aoc.com/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Dec 31, 2010 | AOC 2036sa 20"TFT LCD Monitor

1 Answer

Color problem


try to press the recall botton is it works then good for you...
If not then try a degausser tool.

if it still have the same problem after using a degausser tool, then there might be some parts of the monitor which is defective..

May 25, 2010 | AOC 5 En 15" CRT Monitor

1 Answer

Power button locked, to unlock...


You may wish to try this (my model AOC g2016wa2)
1. push MENU button
2. scroll to Advanced
3. push MENU button
4. scroll to Factory recall
5. push MENU button
It resets the power button locked setting but you lose all other settings.

Feb 24, 2010 | Envision H190L Monitor

1 Answer

Color temperature for the monitor


I have mine on 9300K. The whites seem whiter to me rather than the yellowy tint at lower temps.

Nov 12, 2008 | Mitsubishi Diamond Plus 91 19"

2 Answers

AOC 17" Flat Monitor (silver)


Hello all.I had 2 AOC monitors with this kind of problem also and figured out the problem with this kind of monitor. All you have to do is to unscrew the monitor and get the control control switch buttons on its circuit board. There are four switch button that control the monitor with four pins each that attaches to the circuit board of AOC, another option is to replace the switch button with a brand new  control switch button which can be bought to your local electronic shop. Now i had no problem with my AOC monitor because i literally removed those switch control buttons from its circuit board.

Mar 03, 2008 | AOC CT720G 17" CRT Monitor

1 Answer

Aoc 7 ELR 17 in. CRT diagram


no necesitas tener TODOS los diagramas para reparar esos monitores,trata de usar la cabeza. try searching altavista...

Jul 04, 2007 | AOC 7 ELr 17 in.CRT Conventional Monitor

Not finding what you are looking for?
AOC LM729 17" LCD Monitor Logo

Related Topics:

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top AOC Computer Monitors Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you an AOC Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...