Question about Samsung PCL545R 54" Rear Projection Television

1 Answer

PCL 5415R GHOSTING OF BLUE

SAMSUNG PCL5415P SEPT 2001 - VERSION- 3
BLUE GHOSTS TRIPLE VISION OF BLUE , HAPPEND OVER NIGHT,
CONVERGENCE ADJUSTMENTS ARE ALL A JUMBLE IN BLUE BUT FINE IN OTHER COLORS. I WOULD LIKE TO FIX THIS PROBLEM MY SELF IF POSSIBLE. PARTS HOUSE # INSTRUCTION ECT.....
THANKS BIGBEAR4131

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 19,396 Answers

It may be a problem with the ics, let me find schematics for your model

Posted on Apr 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

MY TV IS OUT OF FOCUS ON THE ENDS CLEAR IN THE MIDDLE WITH GHOSTING RED A BLUE EVERWORD OR DIAGRAM LOOKS 3 D OR DOUBLE VISION WHY


have you tried adjusting the convergence on the tv

once they get older or get moved you need to do this

go through on screen menus and look for adjusting convergence menu and follow on screen instructions

good luck!

Mar 25, 2011 | Mitsubishi WS-65611 65" Rear Projection...

1 Answer

Triple colored ghosts


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Apr 17, 2010 | Sony KP-43T90 43" Rear Projection...

1 Answer

My sony projection xbr 57 in hd is ghosting


if it's red, blue, or green ghosts, then you need new convergence chips, stk 392-570, have to be soldered in.

Sep 19, 2009 | Sony KP-57WS500 57" Rear Projection...

1 Answer

I have triple vision going plus it has started to


This is a common problem. Your convergence has gone out.

Common symptoms are...

1) 3D Video
2) Warped Video
3) Convergence menu does not adjust the red or blue correctly.

Go here for a solution...

http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Sep 05, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Mitsubishi ws48511 ghosting problem


You need to have the convergence output IC's replaced. These are large amplifiers which control where the red, green and blue beams land on the picture. When they fail you will get colored ghosts. This is a very common problem for any projection television. Any reputable tv repair shop can do the repair in your home and the average cost of the repair is between $225 and $325.

Jun 01, 2009 | Mitsubishi WS48511 48" Rear Projection...

1 Answer

Samsung model pcl 5415r tv looks like its in 3d


If this set is new, a problem like this would be covered by warranty. If it is no longer under warranty, locate the convergence ICs which will be large black ICs attacked to a heatsink. Try resoldering the pins on these ICs first. If that does not resolve the problem, replace the ICs. These should be marked STKxxx.

Keep me posted,
Dan

Jan 12, 2009 | Samsung PCL541R 54" Rear Projection...

1 Answer

Blue Ghosting Help Needed


Good Day, jhazelwd;
From what you say it sounds like the Convergence IC's have failed. Part number 267P150010, STK392-570, replace both IC's. They are on the middle board secured to a large heat sink.
Good Luck, big IRISH.

Aug 24, 2008 | Mitsubishi WS-65809 65" Rear Projection...

2 Answers

Convergence adjustments


Replace both convergence ICs nuber STK392-040 that should take care of the problem. you can get new replacement ICs at the following link and they will send free instalation instructions with pictures so you can install the new ICs. heres the link.
http://servicemanuals.vstore.ca/

May 27, 2008 | Samsung HC-P4752W 47" Rear Projection...

2 Answers

BLUE GHOSTS


You will need to get your geometry correction repaired. STK circuit has failed. You should be able to get repaired for under 300.00
If you know how to solder, you may be able to perform yourself.
Craig www.classtorations.com

Apr 10, 2008 | Samsung PCL545R 54" Rear Projection...

Not finding what you are looking for?
Samsung PCL545R 54" Rear Projection Television Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...