Question about DVD & Blu-Ray Players

1 Answer

DVD player was working. Now, when any DVD is placed in, it just reads "loading" and nothing happens. Is the DVD player dead or is there hope?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

I had this same problem with my Apex AD-500W DVD Player. I decided since everyone said the player basically needed to be replaced it wouldn't hurt to go through the buttons on the remote just to try and figure it out......I DID!!!! I turned on my DVD Player, inserted a disc, turned on my tv and then hit the SYSTEM Button right below the power button until the screen said MULTI and the machine started working perfectly. There are 3 settings in that button, PAL which made my screen go crazy, NTSC ( i have no clue) and MULTI(this one made it work)! Hope it also works for all of you!!!

Posted on May 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Player won't load a blank DVD-RW disc


because there is nothing to read in blank cd rw , because dvd operating system is not meant to write cd ,but only to read the disk

Jan 31, 2013 | Samsung DVDR120 DVD Recorder

1 Answer

When i put in a dvd, it makes clicking noises, after that a notice


follow this steps and fix it. God bless you
Does not play disc
  1. No disc. - Load a disc into the tray.
  2. Disc has been loaded upside down. Place the disc with the label side up.
  3. Disc region code does not match region code of the player.
  4. Disc type is not the correct type to play.
  5. Disc is damaged or dirty. Clean the disc or try another.
  6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

Nov 14, 2012 | Sony DVD & Blu-Ray Players

1 Answer

I purchased a Philips PET707 portable DVD player. It worked fine for a while, but now, when I put a disk into it, it just says


Replace the player, the laser pickup assembly is the problem, overtime it becomes weaker until it can no longer read the disk.

Mar 31, 2012 | Philips PET707 Player

1 Answer

I have a JVC VCR/DVD-recorder, model DR-MV7S. It developed a problem... when you placed a DVD on the tray & pressed the "eject/open" button to take the DVD into the recorder, the tray...


This can be due to a faulty LOADING drive settings, It can be due to a misalignment of the loading section and so the load does not reset to the PARK CONDITION of the MODE.
It can be a aulty gear, belt or jamming in the drive.
You need to open the player, remove the mechanism and manually check the forward and loading motion which can confirm. If the belt or the drive is jammed this can be checked and replaced or reset.
Check the mode switch settings of the forward loading.

Sep 19, 2011 | JVC DR-MV7S DVD Recorder/VCR

1 Answer

While trying to convert a VHS to a DVD, both are placed into the converter and I press the button indicating the process to begin conversion from the VHS tape to the DVD, but when I press the...


The Sony SLV-D300P is a DVD PLAYER and VCR. It does not record DVDs. You would have to buy a combo unit with a DVD recorder, not just a DVD player.

Mar 14, 2011 | Sony SLV-D300P DVD Player/VCR

1 Answer

I cant eject the DVD. It keeps saying "Please


Hi,

Try pressing repeatedly the eject button while you turn on the unit. If this doesn't work then it is a mechanically problem in your player.You need to be manually open to take out the dvd.The rubber thread which should be connected to the motor inside the DVD player might have moved from its place.
You need to place the rubber thread to proper place.

Furthermore, if the belt is slipping, the mechanism never gets the "drawer closed" signal, and the disk will not spin.

After a DVD player has been used for awhile, another common problem is that the laser in the DVD player becomes misaligned, inhibiting its ability to read DVDs. So it indicates the defective laser motor. The only way to fix this problem is to bring the unit to a service center for repair.

Hope this helps.

Please feel free to ask us if you have any further queries.

Shane

Feb 13, 2011 | Kiss Technology DP-600 DVD Player

1 Answer

My dvd player stopped loading dvds. It will say "loading" for a while before it just says "disc error". It's definitely not a problem with the dvds though, I've tried a few and they all...


This is a Laser Pickup Assembly issue, the pladder motor that the dvd sits on is not working and has become defective, the only solution is replaced the machine for a new one, not cost effective for repair.

Jan 05, 2011 | Toshiba SD-1800 DVD Player

1 Answer

Wont load any DVD'S


It is possible that the power supply is not providing a solid 5 volts.
Many of these units had problems where the 5v is too low (4.9).
In most cases capacitors can be replaced to correct a low voltage situation. Be sure to use 16v capacitors in place of any 10v.

Feb 18, 2008 | Cyberhome CH-DVD 300 DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96372 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...