Question about Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

Kp-46wt510 i have an sony kp-46wt510 and the colors on the tv are all out of place. instead of seeing one picture i see 3. what can i do to fix that or what parts do i need and were to get them

Posted by on

  • 1 more comment 
  • Anonymous Apr 14, 2008

    My problem is similar to this but my picture is also curved like someone actually punched the center of the picture.

  • Anonymous Jun 09, 2008

    Both IC were changed but the problem still persist.

    The three color are still out of convergence.



    All 3 fuses of each IC (3.14A 4913.15) on board are good.

    Where else should i look? Now im out of clues......

  • branusik Jun 23, 2008

    my blue color is all pushed on the sides of the tv, the center of our screen is fine just bouth sides have the blue colr pushed to side

    if any one can help let me know at branusik@yahoo.com

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Also check the 2 Pico Fuse (5A) on power supply board. (The vertical board on the left)

Posted on Jun 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 8,617 Answers

You need to replace both convergence ICs they are easy to install. You need two STK392-560 ICs you can get them at the following link and they provide free installation instructions as well as free online messaging with a repair tech while youre donig the repair. It takes about 45 minutes to do the repair and you will save about 400.00 by doing it yourself. Heres the link I am one of thier repair/support techs. This is a very easy repair.
http://servicemanuals.vstore.ca/
just click on the convergence IC catagory and you will see the STK numbers that you need.

Posted on Apr 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a sony 46 inch rear projection model #kp 46wt510! Purchased it new in 2004! Have nothing but great things to say about picture untill today! I have a color seperation with red, whatever line or...


Hi,
This is problem of convergence output chips failure and it is fixable.
Replacement of convergence output chips on D board will solve tv problem, local tv repairman will do this job because convergence output chips replacement requires soldering work on circuit board.
Thanks.

Jan 01, 2011 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

The color on my Sony t.v is not working correctly


These sets have several common problems which are listed below.

Problem #1) Convergence

Yours may have one or more of the following symptoms
  • Screen Looks 3-D
  • Colors wont align
  • Screen may look distorted or warped
  • No Audio/Video - makes a chirping sound.
Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....
  • Dull looking picture
  • White looking picture
  • Halos around objects
  • Red/Orange looking picture

You can see some more examples and find the fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Mar 30, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

Our Sony KP-46WT510 rear projection screen TV just


Convergence ICs, they are big black ICs will have part# on them if they are STK392-110s use 180s better ICs also CK pico fuses in front and behind ICs
they will look like resistors but will be Yellow or Green 5amps/6amp fuses

Mar 18, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

I have a red shadow in 3d on sony KP-46WT510 TV.


Ur convergence is dead.Problems:Are 3D colors,colors misaligns,and colors out of focus.Know how to solders?Must change 2 convergence ICS,and some or all the resistors.Tries Websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Feb 17, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Problem with picture on wide sreen TV


You probably need to get a Sony TV Convergence Kit. More information can be found using the link below.

Convergence Symptoms:
  • Screen Looks Distorted/3D
  • Colors wont align
  • Screen may look distorted
  • No Audio/Video - makes a chirping sound.
You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 05, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

My sony KP-46WT510 the color in three corners is blured and the picture is bowed.


Hi,it seems you are experimenting a light engine problem.This is how your tv works: http://www.youtube.com/watch?v=ZLLHnQ4y-wo So basically the 3 Lcd chips that create the colors and image is going bad and thats why you get that color discoloration.Contact Sony or look for your light engine online.God bless you and your house!

Nov 18, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Sony 46 inch proj tv picture is bowed in the middle and color is


Problem #1) Convergence

Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 29, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

2 Answers

Sony projection tv convergence problem


You need to replace the convergance IC's and a pico fuse on the power supply

Sep 03, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

7 Answers

The red convergence is off


replace the convergence ICs post your model and I will post a link where you can get the parts and they include step by step instructions with pictures so you can do the repair yourself takes an hour and will save you about a 400 dollar repair bill.

Mar 30, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

Not finding what you are looking for?
Sony KP-46WT510 46" Rear Projection HDTV Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98796 Answers

The Knight
The Knight

Level 3 Expert

69745 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...