Possibly, you could push the hour-setting button through either the military or standard time setting, i.e., there are actually 48 "hours" you can set your watch to and you need to cycle through enough of them to reach the standard or military hour you want.
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press the lower left button to change the mode, make sure that you are in timekeeping mode. Press the lower right button to toggle between 12 and 24 hours. Note, with 12 hour format PM indicators will appear in the left of the hour digits.
To know more about instruction on your watch, click on the link.
Press the mode button until you find the setting for 24 hour or 12 hour setting. (It is likely that the message will be abbreviated because of the limitations of the display, so some interpretation may be needed.).
You change the setting by pressing one of the other buttons on your watch - some experimenting may be needed.
This manual will help
I think these are the directions you need
2.0 Alarm and Chime On/Off
2.1 In Normal Display hold B-Button,and push A-Button once:
Chime will be on.
2.2 push A-Button once again: Alarm will be on
2.3 push A-Button once again: Chime will be off
2.4 push A-Button once again: Alarm will be off
2.5 Release B-Button, the Display changes to Normal Display
Had same problem. Press and hold C (mode) until the display flashes. Then press C again (without releasing) to get to time. Press "Select" to move from sec, min, hours, days, etc. Press advance to go change the actual time.
these directions work
if you change the following:
Normal Time Setting
5.1 In Normal Display, hold C-Button for more three seconds
and then push C-Button once. Tuesday flag and seconds
digits will flash. Push B-Button once to reset the second
5.2 Push of A-Button once: Minute digits flash and advance by
depression of B-Button
5.3 Push of A-Button once again: Hour digits flash and advance as above.
5.4 Push of A-Button once again: Month, digits flash and advance as above
5.5 Push of A-Button once again: Date digits flash and advance as above
5.6 Push of A-Button once again: Flag of weekday flash and advance as above
5.7 If push of C-Button during any changing time, Normal Display will be
TIME AND DATE 1. Press and hold MODE until HOURS digits flash (you'll be in Alarm Mode) Press MODE again to enter TIME mode, SECONDS digits will flash. 2. Press ADJUST to set SECONDS to zero. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change. 5. Repeat to set HOURS, MONTH, DAYS, and DAY of WEEK. Go through 12 hours to set AM or PM. 6. Press MODE when done. 7. To display DATE from Time display , press START/STOP. 8. With DATE displayed press and hold START/STOP, then press ADJUST to change display between DATE-MONTH and MONTH-DATE. 9. With TIME displayed, press and hold ADJUST, then press MODE to switch between 12-and 24-hour format.
ALARM AND HOURLY CHIME 1. Press and hold MODE until HOURS digits, DAY, and A or P (for AM or PM) flash. 2. Press ADJUST to change HOURS digits. Go through 12 hours for AM or PM. 3. Press START/STOP to select MINUTES. 4. Press ADJUST to change.. Press MODE when done. 5. Press and hold ADJUST, then press START/STOP to turn chime on/off. Press START/STOP again to turn alarm on /off. Release START/STOP when done.
CHRONOGRAPH 1. Chronograph will count up to 24 hours. Lap times are not stored. After 40 minutes chrono display changes from seconds to minutes. 2. With time displayed, press MODE to select Chrono Mode. 3. Press START/STOP to start. 4. Press ADJUST to view lap time. Press again to sesume lap timing. 5. Press START/STOP to stop timing . Press ADJUST to reset chrono to zero. 6. Repeat for successive laps.