Question about Refrigerators
Fridge not getting cold and all warning lights flashing
This to me sounds as if either your gas is not circulating through the refrigeration system, or you have a problem with thermostat. If you have recently physically moved the fridge and then powered the appliance up on the mains without letting the gas settle, then you could have damaged the fridge. And there is not really a lot you can do about this, unless you want to call out a refrigeration engineer to re-gas your fridge and assess the circulation of the pumped cold air flow.
Other problems aside of gas and thermostat could be associated with the pump (if your model has one fitted), and with this in mind, i have a good mind to have a look at the SIOS (spares, Information, Ordering, System) disc for zanussi vendored models and then get back to you once i have a further solution for you. However, I will need your make and model of zanussi fridge, so if you have this to hand it will be most appreciated. In the sad event that you dont have the paperwork/ manual for the fridge, then you can find the manufacturers model details on the rear of the fridge. however, when you move the fridge, you will need to let it stand again before powering up the unit after repair, and this should be done for a period of no less than 24 hrs, and no less than 28hrs if your appliance is a fridge freezer combi.
So once again, when i recieve further information regarding your make and model of refrigerator, then i will be able to fully investigate this matter for you, and try to come up with your most appropriate solution..
In the mean time, i bid you take care, and hope to hear from you soon
Posted on Apr 11, 2008
Tips for a great answer:
Sep 06, 2012 | Refrigerators
Feb 28, 2012 | Zanussi Refrigerators
Sep 05, 2011 | Refrigerators
Sep 01, 2011 | Zanussi Refrigerators
Jun 26, 2010 | Zanussi ZEBF250W Bottom Freezer...
Apr 13, 2008 | Zanussi Refrigerators
545 people viewed this question
Usually answered in minutes!