An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has written 7 tips or uploaded 3 video tips
Re: Printer Not showing all colours
this the error code E9 The connected digital camera / video camera does not support Camera Direct Printing E14 The Ink cartridges whose destination are wrong E15 Ink cartridge is not installed E16 - Ink remaining is unknown E16 -E19 Failed to scan head alignment sheet E22 Carriage error E23 Paper feed error E24 Purge unit error E25 ASF(cam) sensor error E26 Internal temperature rise error E27 Waste ink absorber full or platen waste ink absorber full E28 Ink cartridge temperature rise error - E29 EEPROM error E33 Paper feed position error E35 15 USB Host VBUD overcurrent error - USB E37 17 Abnormal motor driver error E40 20 Other hardware error E42 22 Scanner error E2-2 No paper (ASF) E3-3 Paper jam E4 No ink E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly E8 Waste ink absorber full, or platen waste ink absorber full
Secondly, to run the software your printer has to be in service mode. Do that by - unplug cable - press and hold "power" button - plug cable - press "resume" and release - release the "power" button At this stage, your computer will detect a new hardware
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to say which printer. If it's just blinking on the printer you can ignore it. Did you recently print some photos or something that would have drained one of the colours down quickly? Many of us refill our cartridges, but the manufacturers don't recognize that so the printer keeps flashing the "ink low" message because it counts pages rather than actually measuring the amount of ink in the cartridge.
Press your printer's button to position the ink heads for replacement
Then gently pull out the problematic ink cartridge.
Turn the printer OFF to reset the printer's memory.
After about 3 minutes, turn ON your printer and it should now ask for the missing ink cartridge.
Now gently put on the problematic ink cartridge in place.
Let the printer re-charge the inks and clean the ink heads afterward through the printer's maintenance program installed in your computer. (Go to "Printer's and Faxes, right click on your installed printer, then click "Printer's Preferences. Go to the "maintenance tab" and click on something like Print Head Cleaning.)
in the printer driver there is a option that whenever you install a new cartridge it has to be reset otherwise it shows the message the above you quoted. one more option is there that is change the chip of yellow cartridge and black, after doing this please whip circuits of the cartridge and printer carriage block before installing the cartridge