Question about Vacuums

1 Answer

I need to get a belt for my Eureka up right Model # 2271 what is the number of the belt and how can I get one?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 323 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need belt for Eureka vaccum The Boss model 5848 AV-2. Can you give me a belt number for what i nee. Thanks.


The belt part number for the Eureka 5848 AV-2 vacuum is 61120A.

Should you need part numbers for other pieces of the Eureka 5848 AV-2 vacuum, click on the following site, http://www.vacpartswarehouse.com/Eureka-5848-Lightspeed-Whirlwind-s/1959.htm

Mar 14, 2011 | Eureka 5849A Boss Bagless Upright Cyclonic...

1 Answer

What belt do I purchase for eureka whirlwind litespeed


Hello,

If you have the exact model Eureka that this repair was listed under, model 4388 then please find a link to the belt you need below. If you'd like to verify the model number, please check the back or the bottom of the vacuum for a sticker that also will contain the serial number, and look for the word Model Number. If you don't have the 4388, please just add a comment with the model you have and I'll be more then happy to verify these two models take the same belt, or give you a link to the belt that goes to your model if they are different.

Here's a link to the exact belt called for on the model 4388:
Eureka Extended Life Style U Belt, Part 61120

Here's step by step instructions on how to replace the belt:

How To Replace Brush Roll Belt
NOTE: Turn off the switch and unplug the electrical cord
before replacing belt. Belt pulleys can become
hot during normal use. To prevent injury, avoid
touching the motor pulley when checking the belt.


fa435ec.jpg
1. Lower handle to floor to change belt.
2. Loosen, but do not remove, two screws to release hood.
Lift hood to remove.


8f6c19a.jpg
3. Lift left end of brush roll.
4. Remove and discard belt.


a4f21e8.jpg
5. Place new belt around motor pulley.


bce371a.jpg
6. Place belt around brush roll pulley.
7. Align left end cap with square in base. Push
end cap into place; see left side view.


128701f.jpg
8. Pull right side of brush roll to stretch belt.
Secure right end cap into base.


45ae0ad.jpg
9. Rotate brush roll to seat belt.
10. Replace the hood. Make sure hood front is
behind furniture guard. Hood should seat
onto self-locating screw tabs.
11. Tighten screws.


I hope this information was helpful to you in changing the belt. If you have any questions about how to change this belt, please just add a comment here on the repair page of Fixya, and I'll be happy to answer any follow up questions you might have. If you found this helpful, please be so kind and rate my repair helpful and / or leave feedback for me.

Thanks so much,

Chris Jones
GoVacuum.com

Apr 21, 2010 | Eureka Whirlwind 4388 Bagless Upright...

1 Answer

What Model replacement belt do I need for the Eureka model 2961 BVZ?


Greetings,

According to the Eureka Part diagram for your particular model vacuum, your vacuum uses Eureka Style U Belts. Eureka makes actually 2 different styles of U belts.

The first style is the standard U belt, Eureka part number 54312. This belt is probably the one that came standard on your model. You may purchase this belt from the link below;
http://eurekaservice.stores.yahoo.net/uprightbelt.html

The other type of Style U belt that will fit your model is the Eureka Extended Life Style U Belt, Part 61120B. The Extended U belt is more durable, and lasts longer then the Eureka Standard U belt. You may purchase the Extended U belt here;
http://eurekaservice.stores.yahoo.net/exlifubel.html

Now, if you are quite sure how to change your belt, you may visit the link below to see the owners manual for your Eureka 2961BVZ that will give you step by step instructions on how to change the belt;

http://eureka.com/service/manuals/80244.pdf

I really hope that this was helpful to you in finding and fixing the belt for your Eureka. If you did find this helpful, please be kind and rate my repair solution as helpful by clicking the thumbs up icon in the lower right hand corner below. I really do appreciate it, thank you.

Feel free to request a repair clarification if you have any questions about the procedure of installing the belt on your Eureka, I'll be happy to help.

Chris J.

Mar 12, 2010 | Eureka 2961AVZ Bagless Upright Vacuum

1 Answer

How do I replace the belt on my eurika vacuum it is a boss model.


Did you say that you have a Eureka? Also you need to know the model number because belt changing methods and belt sizes vary depending on the model. You can find the model number on the vacuum and can find the belt you need in the manual. Then you can get any Eureka belt here:

http://vacbelts.com/index.htm

Oct 28, 2009 | Emerson Vacuums

3 Answers

What belt do I use for the Eureka Altima 2961?


Click this link and it will take you to Eureka's website. Just enter your model number and part description and it show you parts you can order for your model. There is also an owners guide you can download.
Hope this helps.

http://www.eureka.com/parts.jsp

Aug 21, 2009 | Eureka 2961AVZ Bagless Upright Vacuum

3 Answers

Eureka Boss Model 4703 Type Belt Problem


Belt can be purchased from amazon, click here and take a look: Amazon com eureka boss vacuum belt. I hope this was helpful. Cheers

Apr 11, 2009 | Vacuums

1 Answer

Need to get access to the belt on my Eureka model 4475


Eureka Model #4475
need to get access to the belt on my Eureka model 4475

I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure.
There may be 2 different ways to get to the belt, I checked the Eureka website and I believe you have to remove the bottom plate and the brushroll and belt are exposed and you would hook the belt on the brushroll 1st and then use a screwdriver with a bent hook and then you can pull the belt onto the pulley, once the belt is on the pulley then you can track the belt by rolling it on the brushroll & belt pulley --- the other way is that there are 2 screws on the bottom of the of the vacuum – remove the screws and then the top cover should lift off the vacuum to expose the belt – then follow the same procedure ads listed above. Check with you local vacuum dealer in your area in the yellow pages or use the Eureka website or customer service phone number listed below:
http://www.eureka.com Customer Service Phone Number
1-800-282-2886 Hours of Operation
Monday thru Friday 8:00 am to 7:30 pm CST
Saturday and Sunday 10:00 am to 6:30 pm CST

Apr 16, 2008 | Vacuums

1 Answer

Changing belt


Turn vacuum over, remove looks like 3 or 4 screws, then the top cover will come off, exposing the belt and brush roll. Part 61520 style J belt.

Nov 08, 2007 | Eureka 2271 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...