Nom de toner de lexmark E120 - Lexmark E120 Laser Printer

The light next to the lightbulb on the printer Toner low/replace PC kit. The printer is ready to receive and process data. In addition, the toner in the toner cartridge is getting low.

Solution:

? Press continue button to clear message and continue processing job.

? Remove the toner cartridge. Gently shake the toner cartridge from side to side and front to back several times to redistribute the toner, and reinsert it. Repeat this procedure multiple times. If the print remains faded, replace the toner cartridge.

For further assistance, please contact Lexmark Technical Support

Replace the chip, is a chip cartridge problem.

if not work try this:

31 Defective toner cartridge or missing cartridge
1. Verify that the toner cartridge and PC kit are correctly installed.
2.Wait 10-20 seconds for the printer to verify the units.
3. Replace the toner cartridge or PC kit if necessary.

My printer is not responging to the pc.

You need to replace either the toner or drum unit or both. If you have used 3-4 toners in the machine it will most likely be the drum.

ok thanks

http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_E120&segment=SUPPORT&userlocale=EN_US&frompage=null#1

You may need to replace your photoconductor unit. Part number 12026XW

takeout cartridge from printer & check if the same toner marks exist on drum then reffil your cartridge properly or change the drum if there is any scratch

You may need to replace your photo conductor unit part number 12026XW its the part that is in behind your toner cartridge it needs changing every 30,000 copies.

You may still be able to do a printer selftest page.

Press the large button on the printer.

Look at the pages for

Toner
Imaging unit

The Imaging unit may be at end of life.

This is the drum unit and collects the waste toner.
Whilst you can just reset the drum counter (see user guide for this E120, it can lead to problems if you don;t replace the drum unit. I've seen E120 drum units packed full of waste toner, to the stage where they won't take any more, and it just spews all over the mechanism. It's a very small waste collector (but its also a very small printer, and relatively low capacity toner cartridges (1k, or 2k).

Remanufactured drum units for E120 can be found on the usual internet auction sites.