Question about Projection Televisions

2 Answers

I have Akai LCT2715N.How to go back from smart picture settings to user picture mode? I lost my remote.

Posted by on

2 Answers

You might try using the input button on the front panel to select the feature in the menu.
But most likely you will need the exact remote which my distributor shows is no longer available

Posted on May 06, 2008

You need the remote because the buttons on the bottom only let you bring up the menu and select the function. it wont let you change them. I have one in for repair and have to get the customer to bring me the remote so I can make adjustments.
I have tried a couple of universal remotes and they don't work either.

Posted on Apr 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Akai TV is acting off kilter in that their is almost like another shape to the right of the figures and a redness to the picture. Can you help? I know you folks can help me fix this, thanks in...


take the original remote and in the customer menu look for convergence--does the set adjust in all areas in the convergence mode? If not you have bad convergence IC's--a model number would tell me a lot.


Steve

Aug 07, 2009 | Akai Projection Televisions

1 Answer

Red and Yellow blurred picture


I had the same problem this week. I tried the convergence thing but it was impossible to fix. I still needed the repairman. He changed two convergence units ($325, parts and labor). Then the tv was still doing the same thing. We had to adjust the convergence and now everything is perfect. You will need your converter

Mar 01, 2009 | Akai PTH5498 54" Rear Projection...

2 Answers

Akai PT5250A - I cannot converge correctly.


this fixed this problem
Plugs on the chassis coming from keyboard and side video input are switched (they have same plug)
redoo convergence save and auto focus in factory mode after switching plugs

Jan 13, 2009 | Akai PT5250A Television

1 Answer

Parental code


To reset this condition usually requires a visit to the repair shop. To clear the parental control from the AKAI brand sets, you must enter the "Service" mode of the television. WARNING: There ARE adjustments in the service menu that CAN destroy your television if improperly adjusted.

This should not matter to you as long as you are simply reseting the parental lock function.

You must have the ORIGINAL FACTORY remote. (The one that came with the television when it was new.)

With the remote press the following one at a time in order:

MUTE - 1 - 8 - 2 - POWER.

Now you should be in the service menu where you should see RESET. Select reset and enter. Turn off TV.

Your done. When you turn your set back on, the code should be cleared.

Feb 27, 2008 | Akai PT5492S 54" Rear Projection...

2 Answers

I cannot reset the picture to Normal (which should fill the entire screen). f


on what dvd player also has zoom mode set it at 16.9 on all units once no zoom in or do u use dish hd page up down will adjust size also

Jan 31, 2008 | Akai PT46DL10 46" HDTV-Ready Television

1 Answer

Key on tv can't view anything only sound


Someone has locked out access to functions. Possible "parental key". Check menu settings for this. If user used a password, you will need it

Oct 29, 2007 | Akai PT4298HD Rear Projection Television

3 Answers

PT5499HD Covergence Akai


Yes, you have a size problem you have horizontal and vertical size. Either its' in the service mode or somewhere on the set, with this set it's probably in menu. Must be set too high. I will look for menu codes! Is this an Akai or Panasonic set?

Oct 04, 2007 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Need akai pt4799hd setup code


Do NOT attempt to enter the service mode to align convergence if you cannot align the convergence with the user's menu. If the convergence cannot be corrected with the user's menu, it means that one of your convergence IC's has burned out and possibly burned out the fuse next to it. If you change any settings without first replacing the bad parts, you will only make things much worse. I believe that set is actually a Samsung, and has the 2 convergence IC's on their own board mounted above the small signal board. If you do not know how to identify and replace shorted convergence IC's, allow a qualified tech to handle it for you.

Sep 03, 2007 | Akai PT4799HD Rear Projection Television

1 Answer

My pic has double vision and contrast wont fix it...........can u please help


sound like a convergence problem.
check out this site.
i did a self focus in the service mode which corrected my problems, but lost the self focus function out of the service mode, so enter at your own risk, i can live with the right picture without the self focus feature,  but am inquiring on forums how to get it back.

May 10, 2007 | Akai PT4799HD Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...