Since I loaded my DX5050 printer on my new laptop running Windows Vista, the printer seems only to communicate in German. I have tried reloading but seem not able to get to a language selection screen. Given my very limted knowledge of German this is proving very frustrating. Help . . .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if their is no power ckeck your power outlet with any currnet meter to check the voltage is avalible to operate the printer is avalible change the plug cable and try again or try with any other cable avalible check the power switch of the cable if nothing happen better to contact your service center
If you are using MS Vista Operating System then your scanner feature will not work as there is no provision for it in Vista. If you are using MS XP or older, unistall the software from your pc. Detach the device and restart the pc. Re-install the drivers from the cd. DO NOT CONNECT the printer at this stage. Connect it ONLY when prompted or at the completion of installation. Good luck
The driver for the P-400 printer will work in Windows Vista. To install it you will need to install it in Windows compatibility mode XP service pack 2. Download the P-400 driver to your desktop from the Olympus website. Open the zip file, right click the mouse on the setup.exe file then left click on Properties. There will be a compatibility tab there. Select XP Service pack 2 and then click Ok. Connect the printer to the computer and direct the found new hardware wizard to the folder for the files it needs to load the device driver for the printer. If this does not work, you may want to call Olympus Tech support for assistance. Their telephone number is 888-553-4448.
Go out to Lexmark web site and look for a vista update in their software download section. So this should solve your problem.Most of the cds which come with equipment do not contain vista software and drivers.