When my machine is in fast spin it is heard down the road lol both top springs are intact and working however the back left of drum is easier to push down than the back right part when viewing it from the front. I dont have any diagrams so not sure if there are springs in place there. Any help will be greatly appreciated cheers (cant afford new one )
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove the top cover, and release the door catch from inside the washer, you will probably need a screwdriver or similar to do do this.You will need to replace the door catch and spring, and possibly the door lock, as it may break when you force the door open. Thank you !!
For most front-loaders: Open the top of washer, screws behind, slide away from front couple of inches & lift up. Lubricate the slot which fits over the tub with washing-up fluid, if there is resistance to insert.
Starting at the top, press the seal so the flange of the tub enters the
slot on the seal. Work your way round the using thumbs to force the slot
on the tub flange. When slot is on the flange all way round, fit the
spring which holds it on. The spring goes into a slot on the outside of
the seal. This is quite difficult and you may need another pair of
hands.Fit the outside of the seal to the cabinet - this
is easy and fit the plastic clamping ring. Test for leaks before
using. Use rinse to test as the water level is higher. (There is no glue anywhere, only clamps,etc)
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
Pl rate me ‘very helpful’ for the free help!
It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber.
To check the springs, remove the top cover, and you will see the springs.
Another possibility is the concrete weight could be broken or loose.
You need to remove the lower rear panel of washer to check the shockers and concrete weight.
Please rate my solution.
I can help you with your query.
In your browser bar type in hotpoint user manuals
In the drop down list, click on
manuals-user guides-handbooks-hotpoint service
In the search box enter your model number and download the instructions.
Please rate my fixya solution.