Blue error screen when loading os

try to re install the OS from recovery disk.. the os cant detect the hard disk. I looked for the error code you provide but cant find it. Please check the error code once and reply in here.

Have you copied windows files or loaded windows?
if you have loaded windows and you see bluescreen that means there is some hardware or software issues.
Try following steps
1) Load windows properly with Clean Disk
2) After loading if you still have same problem means there are chances of Hard Dive having problem
3) There is chance of Ram problem
to check hard disk problem you need to check your hard drive
go to run type cmd
on dos window type chkdsk

Have you checked the cable from the drive to the board? If it is loose or if a wire has cracked inside the harness it can cause this failure.

Also check the drive power supply. There is a chance that the drive is not getting the correct and constant voltage to run. It has enough to get started, but the supply dies after a moment, then resets itself.

Just repair the os by booting the computer with the os and select repair..the os is corrupted

you get this message when there is some hardware which is incompatible or fails / crashes during the installation of OS since you have tried a different hard disk already it cannot be that so try with a different Ram or update bios / replace motherboard.

Hi,
If you are VERY locky, you can place the drive in another PC and copy the data out. When copying do it in small amounts so you might "isolate" the files affected by the error.
If the drive dont spin, you might be able to start it by removing the lid and give it a little push.
Good Luck!

If you have the operating systems disk boot to the disk like you are going to reload operating system ( OS disk example Window XP or Vista Disk) Run though the steps on screen till you get to the point where it asks if you want to load a fresh copy of OS, this will be past the point where you press F8 to continue. Do not load fresh copy of OS. There should be an option to repare you OS. This will fix the OS with out loosing any of you files and stuff on the PC.

Most file copy errors are RAM related. things to try are as follows:

1. Clean the CD with a soft dry cloth and ensure no scratches or smears on data surface.
2. If cleaning CD has no effect, then try system with individual memory modules and see if error is only associated with 1 memory module (The install error is normally copying files to or from RAMDRIVE created in RAM during install process)
3. Run hard drive diagnostics

DST = Drive Short Test.

Its called 90/90 Diags for hard drive. You need to contact Dell Tech because the hard drive needs to be replaced

This is a critical error that has occured due to a unstable core system 32 file base. this has cuased the OS to collapse. you will need to try a system restore. you may or may not be able to retrive your stored files. during the restore, some hard drive files may be deleted. this is the best way to regain stability.

In most cases, thsi is cuased by malware and virus attacks as well. you can initiate a restore by inserting the recovery disk that should have been shipped with your CPU. check in the box that it was packaged in for this recovery disk. if this disk is nto availibe, you will need to purchase a copy of you rOS. you can use this to re install the OS.

You should knwo that, when you use fresh copy of the original OS, it may wipe all stored files in this case.