I have replaced the water distribution part on my aeg 72620 Lavamat as the original part was faulty. With the new part fitted and on a main wash the water is diverted to the pre wash soap compartment instead of the main wash soap compartment - could the timer / control pcb be faulty also?
I have taken my Maytag Neptune-TL washer apart(model FAV6800AWW). The machine did not spin dry...
(More)
I have taken my Maytag Neptune-TL washer apart(model FAV6800AWW). The machine did not spin dry anymore do to the roll clutch bearings being frozen. When I knocked out the roll clutch bearings, I did not pay attention to their orientation. I would like to know how the roll clutch bearings go back on. Looking from the bottom of the washer, which way does the roll clutch bearing go onto the piece with the two ears that drive the drum during spin cycle?
Whirlpool #WFW8300SW01 flashs F-01, Front loader washing machine shuts down completely upon trying...
(More)
Whirlpool #WFW8300SW01 flashs F-01, Front loader washing machine shuts down completely upon trying to start a cycle, and flashes the code F-01. If the machine is unplugged, the flashing stops when reconnected to the power source, but as soon as you try to operate it, it starts flashing F- 01. Machine is about 2 years old.