Question about HP LaserJet 1300 Printer

3 Answers

HP LaserJet 1300 is showing blinking of orange light instead of tonner is in

Sir I am bignner level troubleshooter having problem in finding solution for HP Laser Jet 1300 which is not getting ready and shows orange light blinking. I have check the tonner and the sensor which are located backside but the problem is still as it.

Posted by on

  • 9 more comments 
  • miannouman Apr 11, 2008

    Please make neccssary advice at your once

  • benbreda Jun 03, 2008

    orange light keeps on flashing. What all must I check to rectify the situation

  • Anonymous Jun 23, 2008


  • Anonymous Jul 23, 2008

    error light keeps flashing no matter what I do and there is clicing inside

  • Anonymous Jul 26, 2008

    hp deskjet d1360

  • challenge2ra Aug 06, 2008

    I have already cleaned all sensors of Printer. It is initializing properly. After initialing orange LED is blinking.

    Give me solution.


    Raja Khan

    Patna HCL

  • Anonymous Aug 18, 2008

    orange light is blinking every second

  • Anonymous Dec 13, 2008

    showing blinking of green and orange light 

  • garyblackmon Jan 25, 2009

    I have a HP 1300 Laser Jet---after my wife changed the ink cartridge, the orange light keeps flashing and the green never comes on. The printer does not print. I have check every connection --- are there sensors and where are they located --- do they need to be cleaned--and how?

  • Anonymous Mar 04, 2009

    it doesnt work plz give me an answer to

  • liamforourke Apr 29, 2009

    i recently changed from a hp photosmart printer to a hp laserjet printer but when i try to print my computer still tries to print it with my old printer. how do i hook my new printer with microsoft word?????



3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am having problem in finding solution for HP Laser Jet 1300 which is not getting ready and shows orange light blinking. I have check the tonner and the sensor which are located backside but the problem is still as it.

Posted on Dec 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Yes its ture same problem i sloved the problem .printer on after2 min.and click the green botton still all device again install auto.the closed the printer.note my id chat wth me any problem her

Posted on Mar 11, 2010


My printer showing problm green light showing blinking when i connect it to power

Posted on May 16, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hp laserjet 1300 orange light blinking

Give a call to HP Support (877-690-9305) you will get the solution for the orange light issue.
Support For Hp Printer Call Toll Free 877 690 9305

Dec 08, 2016 | HP LaserJet 1300 Printer

1 Answer

My hp laserjet 1300 printer shows blinking the orange light instead of the green one and I couldn't find out what is the reason

1. Go light/button blinks twice with solid green and orange lights
2. Green light starts blinking with go light twice and then both go off
3. orange light goes off.
4. green light followed by orange light followed by go light cycle twice and a third time by the green light
5.followed by the orange light continuously blinking.

I have already tried the following trouble-shooting:

1. Put in a new cartridge
2. Made sure there is paper properly seated in the tray
3. Made sure all doors closed (I even took off left side to verify no memory cards
4. Verified all doors closed
5. Done a cold reboot by holding the Go button while turning the unit on.
6. Repeated steps 1-5 multiple times.Hope It's resolve all Your Printer Problem,

Still having Problem Then follow Us For HP Support

Mar 06, 2014 | HP LaserJet 1300 Printer

1 Answer

How to install hp lazerjet 1300 tonner

yes, follow the link , you will find all you need in installing toner cartridge

Mohamed Hejazi
AFaqnama-Tripoli -libya

Mar 20, 2013 | HP LaserJet 1300 Printer

1 Answer

I have hp lj 1300 printer befor problem fuser sleeve damage that is repalacing and fixing but now not working only read light bilnking how can repair sir

red light blinking gnerally for
1.door open cartridge
3.fuser element blown( measure fuser element with volt meater)
4.sensor error
and so many
these are the mejor.

Jan 09, 2011 | HP LaserJet 1300 Printer

1 Answer

The orange light is blinking and printer will not print

Unplug and wait 10 minutes, plug back in power strip and "watch" the blinking lights they will tell you what is going on(or NOT).

Nov 19, 2010 | HP LaserJet 1300 Printer

1 Answer

My hp laser on and orange light blinks hp laser1300

There is a list of solutions on HP website. Go thru it:

Jul 21, 2010 | HP LaserJet 1300 Printer

1 Answer

My Hp 1300 laserjet printer doesnt get ready after initializing but giving orange blinking light, what could be the solution because i have checked the toner is in properly .

Remove the paper and re-loaded it, if it still giving you the blinking, turn it off and hold the go key down while turning it on then release it, this should rest any errors, worse case you have a bad fuser.

Jun 15, 2010 | HP LaserJet 1300 Printer

1 Answer

My hp laser jet 1300 is blinking orange and cant print please get me a solution

The flashing orange light is a basic attention light. Check the following:

1. There is a known good toner cartridge installed
2. There is paper in the tray
3. The long tab on the top of the inside of the cartridge access door is not broken
4. Connector J210 on main board is intact, tight and all 3 pins are present
5. That the drum drive engagement is working properly and the contact is present
6. The main motor connector is seated tightly

Jul 09, 2009 | HP LaserJet 1300 Printer

1 Answer

Attention Light Is Rapidly Blinking Orange

sorry I got it, usually you may try:
1) check all paper road no paper inside include the area betweem input tray and cartridge unit the area wetween cartridge and fuser unit and output tray.
2) check 4 sensor input sensor near the input tray roller, marging sensor between input roller and cartridge unit, cartridge sensor at oneside of cartridge unit body, fuser sensor near fuser roller. usually need to clean or adjustment the position.
3) check input roller and cartridge unit and fuser unit at running condition when the power on.
anyone nothing running show error light blink, also show the hardware trouble if all sensors are normal.

Dec 24, 2008 | HP LaserJet 1300 Printer

Not finding what you are looking for?
HP LaserJet 1300 Printer Logo

2,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

Ben Johnson

Level 3 Expert

685 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides