I have problem with my telephone marks device eeror to me 365 already igev reset him but it follows equal

1st You download Webcam Driver.
How do i install my pk-365 m web cam? please help mee
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Hi http://driverscollection.com/

Hi,

To reset PAP2T IP phone adapter, follow the steps for factory reset:
1: Dial from the telephone attached with device PAP2T (****) four stars
2: Now dial 73738# and then press 1 to confirm to factory reset.
3: The device will give u buzz sound for reset.
4: Start programming from beginning.

Good luck!
And Thanks.

Hi there,

You can download the driver to install the web cam if you have lost your installer. To download click here:

• http://www.a4tech.com/ennew/driver/CameraA.zip

1. Click on the link to start the download
2. Save the file on your computer
3. After the download is complete unzip the file using Winzip or the program provided by Windows.
4. Go to the folder where the file was unzipped to and double-click on the file to start installation.
5. Follow the installer instructions to complete the installation.

This will install the web cam drivers on your computer.

Regards

In alot of cases Device Error 365 means the unit is dead.
365 is hardware error. Some cases it has been resolved with forced OS reload, but in many cases it's dead

In alot of cases Device Error 365 means the unit is dead., it's not ever gonna work again.

365 is hardware error. Some cases it has been resolved with forced OS reload, but in many cases it's dead

Go to the following link and click on this link. Then Click on the appropriate RED COLORED link.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=15603

1. Connect a different telephone line cord 2. Connect the telephone line cord to the correct port on the MX310 3. Contact local phone company to check the telephone wall jack 4. Disconnect and reconnect the telephone line cord to the device 5. Press ON/OFF switch to reset the multifunction device

when you get it like that just go to start menu >run>cmd>

and in command prompt give PING XXX space -t
xxx stands for your DNS server address

have a check it is pinging or not ...

i am facing same issue error 365