Question about Intel Motherboard

3 Answers

HOW DO I KNOW THE BRAND OF MY MOTHER BOARD!

I DO NOT HAVE THE CONTROLERS FOR MY MOTHERBORD, AND I DO NOT KNOW HOW TO GET THEM SINCE I DO NOT KNOW THE EXACT BRAND. I OPENED THE COMPUTER AND THE ONLY THINGS I SEE ARE: PCI EXPRESS AND NUMBERS LIKE: 15-K86-011000 671T-M V:1.0.. HOW CAN I KNOW THE BRAND OR MODEL SO I CAN TRY AND LOOK FOR THE CONTROLLERS ON THE INTERNET.
BEST REGARDS
ERNESTO

Posted by on

  • redpawn74 Nov 24, 2008

    I OPENED THE COMPUTER AND THE ONLY THINGS I SEE ARE: PCI EXPRESS AND
    NUMBERS LIKE: 15-K86-011000 671T-M V:1.0.. HOW CAN I KNOW THE BRAND OR
    MODEL SO I CAN TRY AND LOOK FOR THE CONTROLLERS ON THE INTERNET.

  • alejo_gard Dec 18, 2008

    my volume control don't work and i don't know the brand that made my computer so i can't fix it

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 46 Answers

Go to www.cpuid.com

Download a program called CPU-Z. Run the program. At the top of the window, there will be a few tabs, one says either Motherboard or Mainboard, and that will give you model number, BIOS revision, and hardawre version.

Posted on Dec 04, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,027 Answers

The chip sets should be labled VIA/SIS/INTEL etc.
the board is probably made by Elite Group- ECS 671T-MV 1.0

Posted on Apr 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 24 Answers

Fiend your solution direct from intel. Here is your solution........

HOW DO I KNOW THE BRAND OF MY MOTHER BOARD! - bb03e0e.jpg

http://www.intel.com/motherboard/prob676ijt65/solution
52

Posted on Mar 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am having p4 PC with 915 motherboard & 255 DDR-1 RAM. what is the max RAM the PC can use ? I want to know that DDR-2 RAM will work on 915 motherbord ?


Hello,

it does not have an exact maximum RAM.

The reason the Ram did not work with the mother board is because, the Ram is not compatible with the mother board.

Until you get the exact compatible RAM, the board will not recognize it.

I have experienced this a lot of time.

I wish you the best.


Jan 13, 2010 | Computers & Internet

2 Answers

When I turn on the computer I can't see anything. I take off the RAM and turn on the cpu and does not happend anything. What should I do next ?


eset motherbord settings to defaults you can reset with 2 methods.
(1)Pull cmos cell from motherbord for 10 minutes so all settings defaults.
(2) Find jumper on motherbord named "Clear cmos" It has 1-2-3 pins.Put jumper in 2-3 position and thne power up then again put pin in 1-2 position thne all settings defualts.
Refix RAM memory.Clean dust from all parts.
Open processor and processor fan.
Remove pci cards from motherbord then check.
Make sure motherbord not ground with cabinet.
Let me know if you need further assistance.

Nov 16, 2009 | HP Compaq Presario SR2013WM (RE468AA#ABA)...

1 Answer

I have install a new mother board, but when i power the computer the power come on, but no response on the monitor


Or reset motherbord settings to defaults you can reset with 2 methods.
(1)Pull cmos cell from motherbord for 10 minutes so all settings defaults.
(2) Find jumper on motherbord named "Clear cmos" It has 1-2-3 pins.Put jumper in 2-3 position and thne power up then again put pin in 1-2 position thne all settings defualts.
Refix RAM memory.Clean dust from all parts.
Open processor and processor fan.
Remove pci cards from motherbord then check.
Make sure motherbord not ground with cabinet.
Let me know if you need further assistance.

Nov 15, 2009 | Asrock K7S41GX SiS741GX Mainboard...

1 Answer

Pvm7 pro


Yes, it should have no problem.

Nov 08, 2008 | Computers & Internet

2 Answers

Mother bord not a display


mother board
not display show

Oct 19, 2008 | MSI K8MM-V Motherboard

2 Answers

Bios flash


Hello,
firstly i want to tell you that every motherbord bios has a unique program to control the devices.
it this bios is fit on another board casing then you try to firstly run the mother board with old bios. then copy the bios code by any flashing tool and then remove this bios and fit the dead mother board bios in the casing then flash it and then update it which file you copy the old one.
then your motherboard perhaps go on with the dead motherboard bios.
thanks
ramesh

Oct 16, 2008 | Intel D865GBF Motherboard

2 Answers

Mother board driver


i need to dirver motherbord mercury ver:3.0

Aug 20, 2008 | Mercury KVM266PM-U (KVM266PMUD1600)...

4 Answers

Audio driver


help me to instal my sound card i had lost moterbord cd my motherbord is (soltek )and my sound card is built in

Jun 10, 2008 | Intel Mackie UAD1 Powered PCI Plugin for...

4 Answers

Acer AC713 drivers problem


If you know the brand / model of the motherboard, just download the drivers from the manufacturers website!

Mar 06, 2008 | Acer AC 713 17" CRT Monitor

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

1,932 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Tony

Level 3 Expert

2600 Answers

David
David

Level 3 Expert

778 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...