Question about Balance CN6555 Notebook

1 Answer

Help i have a balance laptop and when i start it i get the logo but after that it goes dark and the desk top never comes on

Posted by on

  • lulie224 Apr 11, 2008

    Well I don't even get to see the Windows XP Logo thingy, And the only thing I get to see is the Balance Logo and I press F8 and it doesn't go to that little list for safe mode; it shows me to change the BIOS settings but I have no idea what to change them to!!! and I am also still getting the error message "CMOS settings wrong" and I have no clue how to fix that either!!----Thnx I think i have put all the information if I remember anything I will be sure to post it ASAP ----------------Thnx again!!

  • lugnut6618 Apr 22, 2008

    same problem goes dark after balance logo



    lugnut6618@yahoo.com

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have a Windows operating system installed, try booting in safe mode. You do this by pressing the 'F8' key after the BIOS messages but before the Windows logo appears. (You can press it several times during the boot procedure.) Then you select 'Safe Mode' from the list. If you can see the screen there is probably just a video setting that needs to be changed.

Posted on Apr 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dell inspirion 6000 laptop screen goes black but sometimes I can see the windows screen but it's very dark. When I attach it to a desktop monitor it works fine but the laptop is still dark. Sometime the...


The back light is the whole of the screen, the screen is illuminated by a CCFL lamp (fluro tube) on the bottom of the screen. A inverter supplies high voltage to this CCFL lamp.
If your laptop appears to boot up and the hard disk LED flashes, then the problem is probably a back light fault. This can be a faulty inverter or a faulty CCFL lamp. Please click on this link and follow my instructions to identify the fault and possible fix :-
http://www.fixya.com/support/r3598095-faulty_laptop_lcd_screen

Feb 08, 2011 | Computers & Internet

1 Answer

New monitor purchased with a package with compaq desk top, but trying to use with a Acer desk top, screen comes on , but then goes completely dark after about two seconds. If switched off then on, again...


Could be a faulty monitor, or could be missing the driver information for the monitor. Usually when you first connect it will use a generic driver to start but then should automatically download and install the correct driver information for the monitor. Could also just be a faulty cable, power or VGA, HDMI, which ever you are using. Try using different cables first, then you can google search for the correct driver and manually install it.

Aug 22, 2010 | HP Compaq Q2159 21.5-Inch Widescreen LCD...

1 Answer

The screen goes very dark within a minute after booting up = I can just barely see the menu page


When you say screen goes very dark when it booted to windows so it means that when you turned on the laptop when the dell logo flashes the screen was fine? if thats the case could you please try this. after turning on the laptop you will see the dell logo flashes immediately keep tapping on F2 and then it will show you the BIOS setup utility, please check if in BIOS setup display goes dark as well. If yes then try this, after turning on the computer when dell logo flashes keep tapping on F12 to boot menu then select utility partition to run the diagnostics. Please run test on the LCD check if display goes black when running the LCD test. Then try this when you sees the dell logo keep tapping on F8 to boot in safe mode check if in safe mode display goes very dark. Try this too, boot in F8 then select last known good configuration check if the settings on your display will be fix. If you can boot to safe mode no problem then uninstall the display or video driver. then restart computer.
You can also try to connect an external monitor if you have one just try to isolate if issue is on the LCD or the video card. If the display is dark as well in external monitor then video card needs to be reseated if fails then replaced. In situation like this most video cards is integrated to the motherboards. So replace motherboard.

Dec 08, 2009 | Dell Inspiron 2200 Notebook

1 Answer

My think pad goes dark after the windows logo...


Right click on te screen and click on properity in the screensaver tab check the power setting to make sure it is not set to hibernate if so un check the boxs and check the shutdown time

Apr 21, 2009 | IBM ThinkPad T20 2647 Notebook

1 Answer

Acer Monitor boots up w/computer then "no signal"


you must have disconnected it while the pc was running.damage can occur while doing this as can a keyboard (they are not like USB devices that can be plugged and unplugged while "hot".)

Jul 20, 2008 | Acer AL1916W 19" LCD Monitor

1 Answer

Stuck on logo screen


Hi sandy,
Can you please tap F8 while your laptop is powering ON then select Last Known Good Configuration when you see some options..

when was the last time you use this laptop? i mean, did you see this running before you got it?

Jun 23, 2008 | HP Pavilion a800n (PP163AA) PC Desktop

1 Answer

Compaq Armada 110 - No screen image


WELL I WOULD LIK TO SUGGEST U TO PLEASE RE-INSTALL YOUR GRAPHIC CARD'S DRIVER AND HAVE A LOOK.

Nov 05, 2007 | Compaq Armada 100S Notebook

2 Answers

Laptop died!!!


THe power controller in a laptop manages both AC power and battery. A laptop can power on without a battery as long as it is connected to the charger. That's because both battery and AC power have same power specifications. If the laptop fails to power from AC charger, then you may have an internal hardware failure. If no LED's flash, no light and no noise is made when you connect the charger, the problem is most likely to be a simple one, a faulty connector or something like. First of all, please specify me, what laptop model you have, and, exactly, what does it do when you connect the AC charger.

Feb 13, 2007 | Balance CN6555 Notebook

Not finding what you are looking for?
Balance CN6555 Notebook Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Balance Computers & Internet Experts

kenneth njonjo

Level 3 Expert

1575 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Balance Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...