Question about Radio Scanners

1 Answer

What is the radio code for a acura 2.5 tl 1996

My battery went dead and my radio needs a code to play

Posted by on

×

1 Answer

I need the codes to put in my scanner it is a uniden bearcat bc340crs i need the codes for skowhegan maine can you help

Posted on Apr 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My GRE PSR295 scanner wont switch on


first off check your batteries. if you are using a rechargeable battery pack disconnect it and try it off the power supply alone bad battery packs can and generally do keep radios from powering on. If this allows it to come on, try charging it for 24 hours, and then deep cycling it several times ( run the scanner with sound such as on a noaa weather channel) until it goes dead and then recharge, to recondition the battery pack. if this doesn't work the pack will need to be replaced or rebuilt (batteries plus can do this) if the radio just uses discrete rechargeable batteries simply replace them. meanwhile I'll look for a manual for you....

Here you go

http://www.manualslib.com/manual/703072/Gre-Psr-295.html#manual

Feb 16, 2015 | Radio Scanners

1 Answer

Cobra microtalk will not charge


this is the sign of a damaged or dead battery pack. they can be rebuilt at Batteries Plus or replaced. I would also try alkaline batteries in the radio before spending money on new battery packs. Most rechargeable battery packs must be kept charged regularly, and should be fully discharged before recharging, or they will be damaged and end up with a limited lifespan. IF you are handy with a multimeter you can check to see that the charger is putting voltage out by placing the probes on the contacts while it is plugged in. especially if the cord is twisted or looks stretched, but generally it is the battery not the charger.

Sep 03, 2014 | Cobra CXR875 30 Mile 22 Channel FRS/GMRS...

1 Answer

Need frequency for my scanner cus i lost them.


G'day Leo

I am not sure exactly what frequencies your after but a handy site for you is http://www.radioreference.com/apps/db/?coid=1

It will list up frequency codes in different areas you select

Hope that Helps

Jaysan

Jun 16, 2012 | Uniden BC60XLT Handheld Scanner

1 Answer

My Radio Shack Pro-82 Scanner batt. went dead , now I have no sound


That means you have to put new batteries in your scanner... or recharge your rechargable batteries but if you use rechargable batteries use your yellow battery cradle for rechargeable batteries and your black cradle for alakline batteries....foe pro 82...

Feb 28, 2011 | Radio Shack Pro-82 Scanner

1 Answer

I have a Uniden Bearcat Scanner, Model #BC-60XLT-1... After batteries went dead, I lost everything and don't know how to program it... I'm in Modesto, CA... Any help? Thanks


You can download and print your scanner's operating instructions, at no cost, here:

http://www.uniden.com/pdf/BC60XLT-1om.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Please give us a shout if you need further assistance with your scanner.

Bill B

Aug 11, 2010 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

Hi there! I have an audi 2000 F/L, the radio wants a code


Radio's that have a "safe mode" go into that mode when power has been removed. The vehicles battery may have been disconnected during service for a period of time for this to happen. This is a theft prevention feature that the radio has so if someone rips it out of your car it wont work again without the code. If you have an aftermarket radio, try to find the manual for the radio maybe the code is in there and instructions on how to unlock it from safe mode. But if it is the Audi stock radio try to find the Audi owners manual.

Good luck

Jul 08, 2009 | Radio Scanners

1 Answer

Uniden BC70XLT - Steady tone on power on


must be dead i have one works fine with wall pack

Jun 29, 2009 | Radio Scanners

1 Answer

Can you help


Hello, with the limited info you supplied, I'd say offhand that #1 The volume control is dirty,or #2 The seaker inside the scanner went dead.(not uncommon) If it's a dead speaker, simply go to Radio Shack or a truck stop and buy an external speaker for a CB radio and plug it into the back of the scanner,, Hope this helps,, let me know,,, Mechanic

Oct 17, 2008 | Radio Scanners

1 Answer

Activating my car radio


how do i set code on my AU FALCON

Apr 14, 2008 | Radio Scanners

Not finding what you are looking for?
Radio Scanners Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Scanners Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you a Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...