Question about Uniden Cordless Phone

2 Answers

I have daul phones model #dx17286-2 037z0304 that won't connect with my phone line to get dail tone

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to first unplug the phone jack from the wall if you are not able to use any of the phones on your line. (not including the Uniden phones). If you can get a dial tone on another phone, then you just need to resynchronize the handsets to the base. One at a time, place one on the base and push page. It will flash a few times and when you pick it up, your phone should have a dial tone. Do this with BOTH phones on the base connected to the phone line (not the extra base). Hope this helps.

Posted on May 19, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

You need to coldsolder the flash ic and cpu.

Posted on May 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Dail tone on Line 2. We have 4 lines in total. Today when we pick up line 2, it's open and there is no dial tone. How do we fix this?


It's a good bet that the line is dead before it comes into the building. Call your service provider and start a trouble ticket.

May 05, 2010 | NorStar T7316E Corded Phone

1 Answer

No dail tone --but phone line is connected


Hello.

If the dial tone is not heard check the volume. It may have accidentally been muted or turned down.

Is the phone line plugged into a surge protector? The surge protector may have stopped working or blown a surge, a sudden burst of electricity, which may have caused the dial tone in your cordless phone to go. Unplug the phone line from the surge protector then plug it back in and see if you get a dial tone? It could be that the phone line plugged into the surge was loose.

Try a different phone plug, outlet.

If the other phones on that line work OK, disconnect all the phones connected to the line, leave them all disconnected for 3 minutes, and then connect one at a time.

If still a problem and the other phones on that line work OK, give this a try:

Unplug the battery in the handset, unplug the phone line from the base and unplug the electricity from the base. Leave everything unplugged for an hour or two. That way you can get more of an idea of whether your phone will work. After an hour or two, plug in everything.

Hope this helps.

Jan 04, 2010 | Uniden 2.4 GHz Expandable Phone System...

1 Answer

THE PHONE SAYS LINE IN USE


Check to see that you have dial tone from the phone company by using a standard non cordless phone. if you have dial tone then check the cordless phone and make sure you plug into the correct port and ensure that you have the power plugged into the wall. Also, use the same cord from the standard phone that is connected from the phone to the wall to ensure that your line cord is not bad.

May 29, 2009 | Panasonic KX-TG5672 Twin Cordless Phone

1 Answer

Samsung 816 power outage dailing an outside line


First thing you should verify a dial tone on the fax machine. (use any analog phone)
If you have dial tone, press 9 and then a number
Second is it conected through tel. system? (did it have an internal extension) and there is no dial tone then your analog port may be fried. Call your telephone vendor. He should be able to help you.
You can purchase a manual for about 10 dollars
Email your system model number to sales at aaa-avad.com for further instructions

Mar 31, 2009 | Samsung Prostar 816 Phone

2 Answers

Our company has a Panasonic kx-t7731 main line has no dail tone.


On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.

Carl

Mar 12, 2009 | Panasonic KX-TA824PK Phone

1 Answer

Phone is on pulse when dailing a number


open the on screen menu of the phone there should be a selection for dialing rules.. the tone dialing rule should be in that selection..

Jan 08, 2009 | Uniden Cordless Phone

1 Answer

2 beeps, no dial tone


hand set no dail tone cant all out on the hand set due to no dail tone

Dec 05, 2008 | Uniden Cordless Phone

2 Answers

No dail tone


Check the cor and cos setting of the phone It shold have the permissions to call outside

Dec 02, 2008 | RCA 25414RE3 Corded Phone

1 Answer

VTECH VT-2406 TONE- PULSE SETTING ?


http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=373

Jul 03, 2008 | Vtech VT-2406 Cordless Basic Analog

2 Answers

Siemens Gigaset 2420 tow line phone system


Contact 888-286-9375 Siemens Repair Line. Should be able to help you.

Jul 21, 2007 | Siemens Gigaset 2420 Cordless Phone

Not finding what you are looking for?
Uniden Cordless Phone Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96683 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...