Question about Lexmark Color JetPrinter Z23 InkJet

1 Answer

Z23 usb problem

The software won't detect my computer. I've tried to to install the driver through the new hardware wizard and it woks, but when I try to print there's a window that says that communication isn't available and I can't find it in the device manager. I've done the initial troubleshooting and reinstalled the driver thousands of times, and my brains are just to worked to think of anything else.PLEASE HELP XP

Posted by on

  • Anonymous Jun 08, 2008

    installed printer computer detects device but want print.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 276 Answers

1)right click the my computer icon
2)click properties and then click hardware n go to device manager.
3)uninstall all usb ports and then scan for hardware changes
4)ur pc will detect your printer and ask for printer drivers
5)re load drivers and your pc will communicate with your printer
6)for reloding install the cd follow the instructions on the screen and click next
7)restart when the printer is loded.connect the wires and cords properly.

Posted on Nov 20, 2008

  • smarttech Nov 20, 2008

    Drivers, Software, lost C.D....come this way!

     




    If you have lost you cd or don't know how to install your printer then all you
    need to do is download the drivers and software from the manufactures website
    that suits your operating system and printer.



    Drivers and software download areas for brands listed below, just click to gain
    access and then locate driver for your needs.



    Brother Epson Sharp
    Canon Lexmark
    OKI Dell HP Kyocera Samsung Konica/Minolta
    Xerox Panasonic



    PLEASE NOTE



    When installing drivers/software it is generally a good practice to -








    ·                                
    Delete
    old/previous installs



    ·                                
    Leave printers
    USB cable disconnected from computer until newly installed software requests it
    to be connected.




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have problems wtth my printer/to computer won,t print off


Pl. connect a fresh usb cable to the usb socket found at back side of the pc. Check new hardware found at hardware-device manager/Re-install the driver.
Thanks.

Dec 24, 2014 | Office Equipment & Supplies

Tip

How to connect a barcode scanner to your computer


<p>If you run a business, you probably need a barcode scanner to help control the items in and out of your iTunes. It is also possible to bar code reader to a computer at home. These devices connect through a USB port like most other external hardware. <br /> <p><br /> <p>1. Connect the barcode scanner to your computer via the USB port. A window showing the computer has detected a new piece of hardware. <br /> <p><br /> <p>2. Insert the CD driver installation. Wait until the installation wizard. <br /> <p><br /> <p>3. Follow the instructions to complete the installation. Remove the driver CD and replace it with a software CD is provided. <br />

on Jun 26, 2011 | Computers & Internet

1 Answer

Lexmark z23 won't print and when i do the wizard hardward installation it said that it cannot find software location. Can you please help me?


you need the Lexmark z23 driver installed on your computer first. Here is the lexmark website. just download the driver and install it. Once that is done you should be able to chose it when printing.

the following link is for your printer.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:285:0:0

Oct 23, 2008 | Lexmark Color JetPrinter Z23 InkJet

1 Answer

Not recognize usb printer hp laserjet 3050


Hi, I would suggest you update your printer drivers with fresh drivers, try this, follow instructions exactly as written:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop(watch for the light yellow bar at the top of window viewing pane, click on this and choose – download file - . Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done.


anaanymous


Rate Me Please! Hate it? Rate it…Like it, try it!
Thank you for submitting your question to FixYa.com
Would you please take a moment and show your appreciation by rating my performance.
All ratings and comments are welcome. Thank you - anaanymous

Oct 21, 2008 | HP LaserJet 3050 All-In-One Printer

1 Answer

Computer says that fine cartridges are not installed .correctly. This is not so, and subsequent re-installation, makes no difference. \\\\\\\\\have tried removing usb cable and the mains lead,waiting some...


Hi,
Try updating your printer drivers:

Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop. Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done


anaanymous

Oct 13, 2008 | Canon Office Equipment & Supplies

1 Answer

Printiner not communicating


1)right click the my computer icon
2)click properties and then click hardware n go to device manager.
3)uninstall all usb ports and then scan for hardware changes
4)ur pc will detect your printer and ask for printer drivers
5)re load drivers and your pc will communicate with your printer
6)for reloding install the cd follow the instructions on the screen and click next
7)restart when the printer is loded.connect the wires and cords properly.
 
Drivers, Software, lost C.D....come this way!  

If you have lost you cd or don't know how to install your printer then all you need to do is download the drivers and software from the manufactures website that suits your operating system and printer.

Sep 16, 2008 | Lexmark Color JetPrinter Z23 InkJet

1 Answer

I need to get my lexmark Z23 printer into my computer, and I have no disk, can it be installed on line?


You need to install driver software first, if you have the disk , install it from disk.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then ifyou get in troubles, followthe instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:someprinter does not work on Vista, if you do not find any driver downloadfor Vista on your model page, that means your model is not Vistacompatible.

Aug 28, 2008 | Lexmark Inkjet Z517 Photo Printer

1 Answer

USB Midi Controller


the 'Add New Hardware Wizard' and force it to install the non-certified M-Audio drivers that were supposedly installed when running the M-Audio installer. (Skip internet search, and browse to M-Audio folder in Program files, it will eventually find them.) There are two M-Audio USB drivers that need to be 'forced' via New Hardware Wizard. But Windows thinks its drivers are a better match and even though 'device is working properly' it doesn't get recognized in your software. replaced them with the 2 USB ones from M-Audio, DAW finally recognized the keyboard. I even went through regedit to clean up all the M-Audio stuff so I could get a fresh install.

Good Luck you can do this /Have a great Sunday and a safe one.

Dec 02, 2007 | Acer TravelMate TM3012WTMi (LXTAT06045) PC...

Not finding what you are looking for?
Lexmark Color JetPrinter Z23 InkJet Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...