Question about Siemens Phones

1 Answer

Diverse 2010 phones stopped working

We have a set of portable Diverse 2010 phones [one base unit, and two others] they have all stopped working today. there is no dial tone, and there is a flashing clock signal just next to the battery indicator --what does this mean please? the phone line is working OK with our ordinary handsets. Thank you for your help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have solved this problem by un-plugging the base phone for the night, and then plugging in again this morning, when it started working again, but I don't understand why! anyway, problem solved.

Posted on Apr 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone reads searching after being disconected and reconected


If this telephone is part of a multiphone set there is one base that is connected to a phone line (or if Magic Jack the internet cord). The other phone charging seats work by radio signal from the base unit. Place the phone on the base unit and let it reconnect for a few minutes. If you bought this expansion set without already owning a base unit, you will need to get the base unit or take this expansion set back for a unit that will opperate by itself.

Jan 17, 2013 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

A call was made today with the time indicated for call duration at 1:58. It is now 9:20 pm and that time still shows on Handset #2 of 1:58, and the other three phones all show "Line in Use." ...


Unplug the base unit. Power and signal. Remove any batteries from it, and the hand set. Do all the handsets just for kicks.. Let it sit for about 15 mins or so. Reinstall batt:s and reconnect all.
Hopefully it will be cleared.

Nov 28, 2010 | Uniden TRU9485 Cordless Phone

1 Answer

I have put new batteries in my diverse 4016 phone on the base but it will not charge.can you please sugest what the problem maybe' thanking vou ...


It looks that the handset is not charging from the base unit: if you have a multimeter you can check that you have a voltage slightly higher than your battery pack voltage on the base unit. Make sure the contacts are clean and If you have no reading, then the charger on the base unit is very likely defective.
If you do not have a multimeter, check and clean the (two) contacts on your handset and base unit to ensure proper electrical contact and that you see the charging indicator displayed on both the base and the handset.
If that does not work, to assess if the issue is with the handset, swap the phones from the base and the stand-alone charging station and repeat the test: if it works, swap the batteries between the handset to see if it makes any difference. If it works, then the issue might be with the original base unit handset as you have now 'tested' the new battery on the alternative handset. To summarize, it is a test by trial and error swapping.
Hope the information is of assistance.

Sep 26, 2010 | GE 27851FE2 Phone

2 Answers

Can not rec a dial tone, phone states no link to base move closer



If “No link to base. Move closer to base, try again.” is displayed
even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit.
• Make sure the base unit is not being used.
• Have both handsets and base unit nearby during registration.
• Follow steps 1–3 listed below. You have about 1 minute to complete them.
• Confirm the extension number of the handset which has lost the communication by placing the handset on the base unit or charger.
If you re-register the handset using the other handset’s extension number, the other handset will not function.
• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

1 Base unit: Press and hold [LOCATOR/INTERCOM] until a beep sounds.
• The CHARGE indicator flashes.

2 Base unit: Press the extension number [1] (handset symbol 1 ) or [2] (handset symbol 2) of the
handset which has lost the communication.

3 Handset: Press and hold [FLASH/CALL WAIT] until “Handset Registering” is displayed.
• When registration is complete, a beep sounds from the handset and the display shows the number.
• Wait for 20 seconds after registration is complete while the handset establishes communication with the base unit.


• If the handset beeps 3 times and “Error!!” is displayed, an error occurred. Try again from step 1.
• You can stop registration by pressing [OFF] on the handset, and pressing [LOCATOR/INTERCOM] on the base unit.

Feb 23, 2010 | Panasonic KX-TG2357 Cordless Phone

1 Answer

Trying to use multiple base units


It is not possible to set up 2 base units to work with same handset as the base unit and the handset are tagged by their operating frequency, which also works as the privacy filter for the user, so that your neighbors cannot pick up your line and use on your expense. For your requirement you need a DECT system that can support multiple base stations.

Feb 15, 2009 | Panasonic Phones

3 Answers

No KX-TGA101S communication with KX-TG1033S


The additional handsets must be registered to the base unit. Here are the instructions from the manual:
HANDSET
1. [menu}
2. "handset settings" - OK
3. "Registration" - OK
4 "HS registration" - OK
BASE UNIT
Press and hold [LOCATOR] until the registration tone sounds.
-if all registered handsets start ringing, press {LOCATOR] to stop, then repeat this step.
-after the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds.
HANDSET
Press [OK], then wait until a beep sounds and Y stops flashing.

Jan 31, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Installing a new base unit


You will need to press the page/locator button and hold it down until the charge light flashes. Once you do this, go to the handset and push OK. It should register as handset 4. Hope that helps. CG

May 17, 2008 | Panasonic KX-TG5632 Phone

1 Answer

Phone not working properly


my answering machine keeps syaing that you can not leave a message at this time but i set it up can you help me

Mar 30, 2008 | GE 27851 Cordless Phone

3 Answers

Model 28112ee2-4 dect 6.0


For the handset, you can use the menu button to check the HS Setup settings. For the answering machine, you may have pressed the side button that turns it off. It would say "off" on the lcd if you did that. According to the manual (I just bought one of these).

Dec 21, 2007 | Uniden Cordless Phone

2 Answers

GE 25931 Cordless Unavailable


I had the same problem recently due to a power outage during a storm. GE advised to disconnect the power cord and telephone cord on the "mother" unit. Wait five minutes. Then plug it back in.

I placed the "mother" phone back in the base. After the screen flashed on the "mother" phone, I removed it and then put the other two portables in the "mother" base.

This corrected my problem and all is now well.

Jul 31, 2006 | GE 25931EE1 Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Phones Experts

kakima

Level 3 Expert

96467 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...