Question about JVC DR-MV150B DVD Recorder/VCR

Open Question

Power went out of JVC DR-150B and won't restart

Unit just dies. It was working in the Am and when I got home later in the day, the unit was off and cannot get it restarted. Tried holding the power button (on remote plus the unt itself), and unplugging the unit (and trying different outlets). There might have been a power surge, but other devices plugged into the same power strip/surge protector were not affected. Nit sure what the problem is or whether it would be worth it to send to JVC for repair. Unfortunately, JVC website says it must be sent to a Texas facility for repair, plus the amount (waranty expired, natch). Of course, since I don't now what's wrong, and can't get an estimate not sure if its worth pursuing the repair route or just get a new unit? Anybody have any ideas why the power went out and won't come back on?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: DVD tray will not stay closed (empty or loaded) on

get a new dvd player

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote code for jvc dr mv 150b


Depending on the programmable remote you are using they tend to differ a little. For JVC try one of these below:

111, 036, 005, 129, 130, 015, 029 065, 072, 137, 149, 207, 264, 362 408, 496
or
1011, 1012, 1026, 1049, 1052, 1054, 1055, 1080, 1080, 1092
1117, 1130, 1131,
1227, 1235, 1288, 1299

Jul 16, 2016 | JVC DR-MV150B DVD Recorder/VCR

1 Answer

JVC EX-A1 power failure


Check the main Power fuse inside the unit...

Jan 21, 2013 | JVC EX-A1 System

1 Answer

My dvd player wont work it will just say hello when i turn it on but then it will turn off by itself


I have the same problem. I installed this unit and used it for a total of one day before it complely failed. When you tun it on, the display says hello, nothing is shown on the TV, and it turns itself off within 30 seconds. Solution, I am returning this JVC unit and never purchasing another JVC product again. Complete failure after one days use, pitiful!

Oct 10, 2009 | JVC DR-MV150B DVD Recorder/VCR

1 Answer

Subwoofer powers on for about 4 seconds and then shutsdown


I don't know if you were able to get the problem fixed, but I had the same sort of problem where it worked and then all of a sudden it stopped working right in the middle of a movie.
I took it to a repair shop and he found that it was the power supply... a $4.00 part.

Jun 14, 2009 | JVC TH-C30 System

2 Answers

Cannot eject DVD or turn off machine or anything


hold your power button down for 8 seconds and the machine will power down

Feb 19, 2009 | JVC DR-MV5S DVD Recorder/VCR

1 Answer

Power failure in Jvc camcoder (dr-dv800)


There are protection fuses inside the unit to protect the electronics. This is not a repair for a novice. Bring the unit to an authorized JVC repair center. The parts cost should be around $5. Add in the local repair rate for the total cost.

Dan

Apr 30, 2008 | JVC Everio GZ-MG21 Camcorder

4 Answers

LOADING


It is pretty common problem.
If all of your DVDs are having same problems,
it is most likely either optical sensor is at fault. The other could be the actual loading mechanism problem.
If the dvd tray(drawer) closes all the way in but the DVD disc never completes the loading(reading) procedures, 1) it could be simply dirty or damaged disc. 2) the optical pickup device (eye) is dirty or just went defective. 3) sometimes the drawer tray that houses the DVD did not complete to engage in disc reading position can produce this result.

I would suggest: first check the position of the drawer and condition(s) of your DVD disc itself.
If the pickup device(optical eye) is dirty or defective, that needs to be serviced by a qualified technician. or contact JVC service center. Their information can be found at
http://support.jvc.com/consumer/support/support.jsp?pageID=10

Feb 13, 2008 | JVC DR-MV1SU DVD Recorder/VCR

1 Answer

Loading... jvc dr mh30


Commonly this is cause by leaky capacitors in the secondry of the power supply SMPS ASSY.The PCB is located in the back right hand side of the unit.A visual inspection for any bulging of the capacitors will confirm this.
If you cannot change the capacitors yourself I suggest you take the unit to your local service center.

Nov 18, 2007 | JVC DR-MH30S DVD Recorder

2 Answers

DVD/Video recorder blinking


This is an issue for this machine. It happened to me, and after some internet research, I found that JVC acknowleged it (on their web site). The unit was still under warranty, and JVC had me ship it to them for repair. It was fixed... for about a year. It started doing the same thing recently. I only had enough time to discover that I hadn't purchased any extended warranty, then the thing quit altogether. Wouldn't even power up, wouldn't eject the tape or DVD that were inside. I gave up, and took the case off to recover the tape and DVD. What I found inside was what looked like any DVD or CD drive from any computer. Since I had a case for an external IDE drive, I hooked it up to my Mac using that drive. Good news! Not only did it eject my DVD when I pushed the button, I found that my Mac with OS X Tiger recognized the drive! With absolutely NO software installation (not even a driver), My Mac now burns DVDs beautifully on that drive using Toast. At least I salvaged something really good from that piece of junk sold by JVC.

Apr 28, 2007 | JVC DR-MV1S DVD Recorder/VCR

Not finding what you are looking for?
JVC DR-MV150B DVD Recorder/VCR Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...