I am an engineer. I have contract of Toshiba 2030 copier machine. In this machine copy lamp is missing and secondly while switching on the machine ,after warmup time machine display shows INSERT KEY COPY COUNTER. The machine works on 23oV. Kindly help me by informing the Voltage and Wattege of the copy lamp and how to solve the problem of display indication.I have no service mannual. If you can send me the service mannual by e mail I will be thankful to you. My e mail is firstname.lastname@example.org
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dear sir; the toshiba copier they store the desciption in the memory therefor you just press "8" and "clear/stop" key simultaneously, It might be resetable, just turn machine off and back on. if you need more help please let me know,
HAVE A HAPPY HOLIDAY!!!
"Exposure lamp timing wrong" simply means that the lamp is coming on at a time when it should not be coming on. It is not a problem with the lamp itself. It is most likely a power supply problem. There is probably no simple fix.
Just because Konica Minolta no longer will sell you an agreement does not mean that you cannot get the copier serviced. There are plenty of independent repair agencies that would love to service your copier, unless you are in a really remote location.
The EP2030 was one of the last Minolta analog copiers, and parts are still readily available.
No, in stand-by the exposure lamp should not switch on. What comes on in regular intervals is the heating lamp inside the fusing roler which can be seen from the exit side of the copies. The exposure lamp is under the glass and only comes on and print button is pressed and copy process begins.
Is there a resettable overheat thermostat on the lamp carriage? They sometimes pop - check continuity. UNplug the machine first! Ac power can be present at these thermostats, even with the machine switched off!
hi im jules_09.have you check the inside of the copier?open the front
door then see if there a paper in the transfer the transfer is in front
of you if the door is open.the check the fusing unit many paper jams
happen in the fusing unit.then at the paper tray if you cannot locate
the paper jam inside the machine look at the paper tray from 1 to
3.then at the side most copier have opening at the side look for the
door so you can see if theres any paper stock