- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is not a question for JVC but more for GMC. On the JVC radio side, if it can be controlled via steering wheel, you will see a blue with yellow stripe cable that states [STEERING WHEEL]. Not all radios can adapt to steering wheels controls.
= Philips Renault Code Entry (For cars with a Steering WheelRemote Control.)
Note: If your car does not have this remote control, thenplease ask for alternative instructions )
Turn on the radio and the display will show 'CODE'
Use the Steering Wheel Remote Controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for thecorrect first digit
Press the [ ¬] button then rotate the thumb wheel for thecorrect second digit
Press the [ ¬] button then rotate the thumb wheel for thecorrect third digit
Press the [ ¬] button then rotate the thumb wheel for thecorrect fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to storethe code =====================================================================
you need a pc99-x06 and then a patch lead which is stereo specific, so if you buy a JVC it will be pc99-jvc, alpine will be pc99-alp etc etc for your steering wheel controls (these are made by a company called autoleads who do loads of different stuff for car audio)
the stereo you purchase will have to be steering wheel control compatible, which should be stated in the description/instructions
you can have a sub amp etc with steering wheel controls, as thats run from the stereo and main wiring loom, and isn't affected by your steering wheel controls
To enter the radio code on most Renaults you do not use the buttons on the radio. Instead use the remote control buttons on the steering column.
The remote control has a rotary control, (either vol +/- or track/station +/-), use this to set each individual digit.
The bottom button on the controller moves to the next digit of the code.
When you have the correct code on the display, press and hold the bottom button to enter the code.
You should hear a beep and the radio should start up.
You have 3 attempts to enter the code. If an incorrect code is entered 3 times, then the radio will lock up for about 30 mins before it will allow you to try again. If this happens 3 times, then the radio will lock up permanently.
If you don't have the correct code, or the radio is locked, then there are companies which can re-code the radio.