Question about OKI C5800Ldn Led Printer

1 Answer

A message keeps flashing up 231 fatal error. Can you let me know what I need to do. 0116 240 3430 Dorothy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • OKI Master
  • 19,396 Answers

231 fatal error is telling you that the data from the chip on the toner cartridge is invalid or cannot be read.

This may happen for one of the following reasons:

1)The printer is unable to read the data on toner chip because of toner dust or dirt inside the printer.
Solution: Clean the printer inside, clean toner slot and drum.. See:Clean your laser printer.

2)Either the toner is not an original cartridge, it is refurbished or refilled, or the chip on the toner cartridge is defective.
Solution: replace the toner, or replace the Chip on toner cartridge.

3)The toner sensor in your OKI is defective.
Solution: Call the support number listed on the printer manual to arrange repair.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does this message mean: 231 Fatal error 03


During a 3 minute unplug, carefully check ALL sensors, latches and doors for misalignment or damage. Replug.
Call service.

Feb 03, 2015 | Oki Electric Industry C8600n Led Printer

1 Answer

Oki


231 means RFID reader I/F error. 03 means Communication error
between the RFID reader and the tag chip. The remedial measure is to check for normal connection of the antenna cable.

May 06, 2014 | Oki Electric Industry C830DTN Laser...

1 Answer

Printer stopped


Error 231 could be caused by multiple issues. The RFID R/W PCB, CU/PU PCB just to name a couple. This might be best left to an authorized service agent.

Nov 09, 2013 | Oki Electric Industry C610dtn Laser...

1 Answer

KONICA C 352 ERROR CODE C-D 231


TRy reset:
Turn OFF the copier.Press and keep pressed thje Utility key and turn ON the copier.
Keep pressed the Utility key and wait will the Trouble reset message displayed.
Release the Utility key and and touch the message.
Turn OFF the copier ,wait 1 minutes and turn ON.

Apr 09, 2013 | Office Equipment & Supplies

1 Answer

OKI C5650 231 FATAL ERROR 03


I tried putting 1.5mm of plastic foam under the RFID chip to raise it up in the toner cartridge. This seemed to work.

Jan 17, 2012 | Office Equipment & Supplies

1 Answer

Fatal error message says ''231: fatal error 03''


It doesn't sound good, but a trick to try is to unplug the printer to see if that reset the board.

Nov 24, 2009 | OKI C5500n Printer

6 Answers

OKi C5800ldn 231: fatal error 03


I have the Oki 5650 which had been great for about 18 months. Then found that the C cartridge was showing error as 'not installed'. After much fiddling about with it and checking on the internet I can now rectify this by either pushing down on the top of the printer while it boots up, or removing the small chip on the left top of the toner (make sure you have 'earthed' yourself to prevent any static damaging the chip when you handle it!) and taping securly onto the top of the cartridge above the chips proper slot. This now has been working OK for 6 months. Strange how this only affects the C cartridge (which has also been replaced and had the same problem). I suspect that the printers RFID chip reader for the C cartridge is having problems reading the chip and moving the chip closer to the reader by either taping to the cartridge top of puching on the top cover while printer boots up resolves the problem (for now anyway!) This can also trigger the 'service call 231 fatal error 03' message which also disappears if you follow the above procedure.
Hope this helps you.

Feb 13, 2009 | OKI C5800Ldn Led Printer

1 Answer

Fatal exception error


Those are just messages about the stream sockets closing without the protocol closing the connection cleanly. What that means is that the Data network is not configured correctly, I assume somebody made a change or upgraded a network switch and didn't configure it correctly.

Oct 26, 2008 | Mitel 5220 IP Phone

Not finding what you are looking for?
OKI C5800Ldn Led Printer Logo

1,315 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...