Question about Dishwashers

2 Answers

KDW243A fault code E4 - Dishwashers

Posted by on

  • hearn Dec 31, 2008

    But the dishwasher is integrated so I can't get it out adn tip it up

  • jonesy619 Jan 28, 2009

    How do you get rid of the water in the machine?...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Our dishwasher is full of water and made a horrid noise before this happened like like something was stuck but can't fine the problem. Can any one help.

Posted on Nov 05, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 216 Answers

Greetings dtcldean,

This error message means too much water in your machine.

Thank you,

Agent Dort
Go Ahead. Use Us.

Posted on Apr 10, 2008

3 Suggested Answers

  • 1 Answer

SOURCE: error code e4 on kenwood

Error code E4......I have the definitive answer.
All the recommendations to tilt the machine are totally wrong!!!!! It may work in the short term but is a bodge-fix and covers up the "real" problem - you have a water leak- its as plain as that.
There is nothing wrong with the Kenwood and it has a 'Flood Sensor' that is filling with your leaked water.
I too was suckered into this quick fix but it didnt work for me; then I spoke to a neighbour who is also a dishwaher repair man.
We removed the machine , removed both side-panels (yes its easy for a DIY), dried out the water from the bottom pan (the sensor sits in a small recess right in the middle of the bottom pan). The machine was switched on and we checked for a leak; now there are many pipes and you need to observe just where the leak is. In my case the water was pouring from a broken pipe, but worse still it was leaking right onto the mains electricity !!!!!!!
So DONT mess with bodge fixes - they may kill you!!!

Posted on Feb 20, 2009

  • 1 Answer

SOURCE: Error code E4 is on

Error code E4 means there is an overflow. Water is probably trapped. If you get error code E4, just tilt the machine back about 45 degrees and let the water drain out. It should come out on both sides. Then, you should be good to go.

Posted on Dec 14, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does E4 message mean


It means your leak detector has detected a leak.

Dec 07, 2014 | Kenwood KDW243A Builtin Dishwasher

2 Answers

My dishwasher says E4


Hi,


The error code E4 means selector switch pads is stuck.
First try a hard reset. Unplug the unit for 10 minutes and then switch on the dishwasher. Most cases you won't get the error message.
If you still get the error message then you need to take to service center to get it repaired. Mostly, the inner connectivity between the pad and circuit board is loose/bad.

Hope this helps.

Shane

Feb 27, 2011 | Kenwood KDW243A Builtin Dishwasher

1 Answer

Error code E4 is on our display of our KDW243A dishwasher - what does this mean please?


Error code E4 means there is an overflow. Water is probably trapped. If you get error code E4, just tilt the machine back about 45 degrees and let the water drain out. It should come out on both sides. Then, you should be good to go.

Dec 14, 2010 | Kenwood Dishwashers

1 Answer

My Kenwood dishwasher keeps displaying error message E4 but there is no mention of this in the user manual. Can you explain what this means


Hello,

Some models of Frigidaire washers come with a digital readout display that informs the operator of the unit's function and any errors.

Error codes indicate that a problem has occurred and should be addressed. Different models of Frigidaire washers may vary in their fault displays.

Some washer models use flashing lights at the unit's start, door lock, wash, rinse, final spin and control indicators to display error codes.

Hope this help?

Thanks.

Nov 02, 2010 | Kenwood KDW243A Builtin Dishwasher

1 Answer

Error code F6-E4


Igoogled this all i could find wea control panel fault nothing for e4

Dec 11, 2009 | KitchenAid KGSA906PSS Gas Kitchen Range

2 Answers

E1 fault on kenwood dishwasher kdw243a


error code E1 refers to "lack of water inlet pressure" the valve the elctrically lets in the water might be at fault

Jan 18, 2009 | Kenwood KW85 Air Conditioner

1 Answer

Kenwood kdw243a


The dishwasher still has water in it.  Lean dishwasher back at least 45 degrees and water should drain out through overflow pipe.  It could be caused by the dishwasher not being level.  Otherwise from reading reviews online it seems to be a common fault with this dishwasher and lots of people have returned and purchased different.  

Sep 28, 2008 | Dishwashers

1 Answer

Error code e4 on kenwood kdw243a any ideas????


Error code E4......I have the definitive answer.
All the recommendations to tilt the machine are totally wrong!!!!! It may work in the short term but is a bodge-fix and covers up the "real" problem - you have a water leak- its as plain as that.
There is nothing wrong with the Kenwood and it has a 'Flood Sensor' that is filling with your leaked water.
I too was suckered into this quick fix but it didnt work for me; then I spoke to a neighbour who is also a dishwaher repair man.
We removed the machine , removed both side-panels (yes its easy for a DIY), dried out the water from the bottom pan (the sensor sits in a small recess right in the middle of the bottom pan). The machine was switched on and we checked for a leak; now there are many pipes and you need to observe just where the leak is. In my case the water was pouring from a broken pipe, but worse still it was leaking right onto the mains electricity !!!!!!!
So DONT mess with bodge fixes - they may kill you!!!

Aug 03, 2008 | Dishwashers

1 Answer

Kenwood dishwasher kdw243a


kdw243a code E3 what doesthis mean. ??? pleae.. adres Poland,,,,,, e_mail wiesiekwro@poczta.fm

Dec 14, 2007 | Kenmore Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

71231 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15220 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...