Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Excellence smart drive fills up with water and then doesn't wash

I used the machine on Sat did a few loads was ok then tried to do another it filled the water I noticed the bowl not spinning as it normally does whilst filling. Then the machine just stopped I advanced the wash it rinsed and spun normally. Sunday i tried again same thing filled with water and stopped I got it to wash after I pushed the time saver option. I tried again this morning without any luck.

Any ideas?

ThanksEster

Posted by on

  • Ester Jun 10, 2010

    I have done several loads since I had the problem and now the machine seems to be OK. When the machine stops it beeps and all the lights go out as per normal.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Fisher and P... Master
  • 713 Answers

Hi just read your posting. Now when the machine stops does it sound a beeping sound and a series of lights light up? If it does starting from left to right I need to know what light have come on in the row of 8 lights.Is it the 1st and 5th or 3rd and 7th etc.Please reply 4 further help.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher and paykel Smart Drive 9 excellence 7.5 washing machine wont fill at the start it just makes sounds like its trying then starts beeping?


the water soleniod has went bad pull out washer look to where water lines hook up to it turn of water to them then remove hoses unplug machine remove the soleniod valves make sure you write down the wiring order and hose placement on something get new valves replace rehook water line turn on water ect.

Aug 20, 2014 | Washing Machines

1 Answer

Fisher and Paykel Smart Drive Excellence 9 5.5kg won't work at all, no power, no lights, no nothing! help :(


it has fuse boards and the probally burnt out one or more of them ,, if so its cheaper to just junk it .

Mar 29, 2012 | Washing Machines

1 Answer

When using the smart drive 051 the machine attempts to start filling (on a cold wash) then the water flow switches off after a few seconds and timing is inconsistent of the attempts to fill. After 3...


Hi just read your posting.Now when the machine beeps a series of lights will light up.They will be in a row of 8 lights.Starting from the left to right which ones are lit.Is it the 2nd and 4th or the 1st and 6th ---etc---?Please reply with additional information and I can help you rectify this fault.

Aug 03, 2010 | Fisher and Paykel Washing Machines

1 Answer

Hey, my f&p smart drive 9 excellence washing machine does not start wash cycle after entering water level etc.... upon pressing the start button nothing is happening any thoughts?


Is the bowl turning slowly when you press start.if it does then you may have a faulty inlet valve,make sure taps are turned on.try advancing the machine to spin cycle,see if it will do any other things such as spin & drain.if it does then probably just not letting in water & inlet valve needs replacing..try filling machine by hand & see if it washes.

May 24, 2010 | Fisher and Paykel (IWL12)

4 Answers

The machine does not work


Ok this fault is telling me you have a faulty RPS(Rotor Positioning Sensor) in this machine. The RPS sensor is located in the motor Stator. To replace you need to remove the motor rotor then the motor Stator. you want to be careful with this part when fitting it as they can break.

Please rate my advice.

Cheers

Steve

Mar 06, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

F&p washing machine


Replace the dual inlet water valve.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 10, 2009 | Washing Machines

2 Answers

Fisher/Paykel Smart-drive 5.5 auto washing machine was on final spin cycle and starte making unbalanced load noises. I stopped it,redistributed load and tried to restart. It restarted in spasms so I took...


sound like the controller opr micro board is sick. unplug leave off for a few minutes then power up again and try empty wash cycle if its the same call the engineers.

Apr 22, 2008 | Washing Machines

1 Answer

Bosch WFX Excel


You have to replace the water inlet valve, the valve where water enters your machine.

Jan 22, 2008 | Bosch Exxcel WFX 2467 Front Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...