Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dc07 dyson roller will not turn

The brush roller will not turn and the belt is still on tight and not broken

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 78 Answers

Hi there VacuumGuru here. The only thing that can really stop it turning is either an obstruction or your brush bearings being siezed. It is a little difficult to describe the steps to solve htis problem so i have made a video. It shows how to check all the way from the the obvious right back to a faulty clutch. Have a look at the video and if it is helpful please take the time to give me a thumbs up or a testimonial. If you find that you need parts for your dyson then check out vacuumspot or nelsonvacuums.
Hope this helps
Guru :)

Click here for video

Posted on Dec 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a dyson dc07 -roller bar broken. have


It always feels like something must break as it's a really tight fit, but go to www.dysonmedic.com then scroll to the bottom of the page and click on DC07 belt and brushroll replacement guide. You'll find everything you need there. Good luck!

Jan 24, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

The suction still works but the primary floor vacuum doesn't. I checked the belt and its not broken. The engine that runs the floor vacuum doesn't engage like it used to


The belt doesn't have to be broken to affect the the way the vacuum picks up on carpet. If the belt is stretched then it will slip and not turn the roller brush properly. Here is the manual and belts you need:

Dyson DC07 Belts and Manual

Dec 29, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Is there something on the shaft that will not allow the belt to turn? Our vacuum the roller will not turn.


It could just be the belt. If the belt is worn or stretched It will not turn the roller brush. You can get replacement belts here:

Dyson DC07 Replacement Belts

Nov 18, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Hi my dyson dc07 animal has suction but the brush bar wont turn. If I turn it on there is a horrible noise. The belt is still fine


The belt is probably worn or stretched. When this happens the belt won't turn the roller brush when it is against the carpet. Here is a link for the manual and links for the belt you need:

DC07 Manual

Replacement belts for DC07 w/ clutch system

Replacement belts for DC07 w/out clutch system

Nov 12, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Trying to replace roller brush on DC07 model


Hi the dyson is a bit strange with this the dyson engineers use a hook to put under the belt and pull it out to allow the brush to be removed I used a metal coat hanger to make the hook after seeing the dyson engineer when ours was under warranty if you make the hook with the wire doubled up it works fine for me hope this is of help Fred

Jun 30, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Roller brush of my dyson dc07 isn't turning...


it migh be the belt.check your belt or it is the brushroll is stuck.(from to much hair ect.)

Jun 29, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Dyson DC07 brush roller is worn and won't make contact with the carpet anymore. I need to replace the brush roller but don't know how...HELP?


Buy the brush over the web etc..

To take the brush out
1 - Take the outer covering - uese a penny to turn the yellow srews

2 - Slide the black brush out from the assembly - Try the non belt side first.

3- Slide the belt out of the brush.

4 - Take brush out - Replace it with new one.

May 09, 2009 | Dyson DC07 Allergy Blue/Turquoise Bagless...

3 Answers

My purple and red Dyson has become hard to push. Could a belt have broken?


It's simple to tell if a belt has broken. Just switch the machine on and have a look (look, don't feel) to see if the brush roller is rotating. If it is, then the belt is not broken.
Depending on how much use your machine has had, it's quite likely that the brushes on the brush roller are worn to the point where you need a new brush roller.  Most vacuum cleaners rely on rotation of the brush roller to pull them along, so if the bristles are too short this doesn't happen.
I hope this helps. Please remember to rate this response.

Mar 11, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...