Question about Whirlpool 24 in. DU1148XTP Built-in Dishwasher

1 Answer

Dishwasher quits running and clean lite keeps flashing.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. If the clean light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (clean light flashes, all buttons are non responsive). It does this as a safety in case the element is broken and feeding electrical current into the water.

To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...


-high temp wash

-heated dry
-high temp wash
-heated dry


Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WON'T END WASH CYCLE/KEEPS ON RUNNUNG..IS THERE A CODE FOR THIS


If you cannot cancel the cycle then turn power off and back on.
Then try to program a short cycle from panel and see if it works.

I am assuming when you say that it keeps running you mean the water keeps churning and does not drain out.
If short cycle works ok then the dishwasher is not heating water to the correct temperature. Need to check thermostat or heater.

Apr 22, 2014 | Kenmore Dishwashers

2 Answers

Control clean light keeps blinking and dishwasher will not function


Your dishwasher will do this as a safety in case the element is broken and feeding electrical current into the water. Sometimes just a false reading.

Reset your console by pressing: high temp wash, heated dry, high temp wash, heated dry

When all the lights are on you are set in diagnostic mode. Just hit cancel a you will be able to run your dishwasher as normal.
If this same light appears again then you have a bad element or thermostat.

Dec 06, 2010 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

AS PER DIRECTIONS FROM TECH, I PURCHASED AND INSTALLED A NEW CONTROL UNIT. THIS WAS BECAUSE MY WHIRLPOOL DISHWASHER GOLD GU2300XTLB3 QUIT WORKING IN ALL CYCLES EXCEPT SHORT CYCLE. PUT EVERYTHING BACK...


Hi,

This is a common problem with Whirlpool washers.If the clean light is the one flashing then your dishwasher could have a heater circuit problem (depending on the age) or this could simply just be water colder than it is used to getting.

Repeatedly press the Heated Dry and Hi-Temp Wash(scrub) which ever yours has until all the LED lights come on, press cancel twice and try the dishwasher again making sure to run the water at the kitchen sink till it is hot before starting the dishwasher, if this trips and locks you have a problem with the heating element, or temp sensor.
Press the heated dry button followed by the normal cycle button, and then repeat once. You should see all of the lights come on for a second or two, and then the dishwasher will work again.
If you haven't already, take a look under the kick plate in front to see if there is a schematic tucked in there somewhere. Whirlpool has put their diagnostics for specific models on these.
I don't have the specific repair manual for you model.
So, if the above combination does not work here are two more that have worked for me.

HiTemp Wash + Air Dry + HiTemp Wash + Air Dry in less than 5 sec
or
Hi Temp Scrub/Scour + Air Dry + Hi Temp Scrub/Scour + Air Dry in less than 5 sec



Let me know, if you need further assistance.


Hope i helped you.


Thanks for using ' Fixya ' and have a nice day!!

Nov 01, 2010 | Dishwashers

1 Answer

Clean lite is flashing


Hi,

This is an indication that there was a failure to heat the water properly. I have put together some instructions on how to reset the control so you can use the dishwasher and some things to check to avoid this problem again. Follow the link below and let me know if it was helpful.

Clean light flashing

Jul 25, 2010 | Kenmore 24 in. 16014 Built-in Dishwasher

1 Answer

THe Dishwasher just keeps Washing And Rinesing


Turned Fridgidaire washer on last night before going to bed; this morning, it's running (at least making sounds) but did not wash; 4000 Series Frigidaire; display says Washing Drying Er Clean S; and two lights are flashing - Ultimate Scrub and Rinse only.
I tried turning off the breaker and restarting the machine but that doesn't work.

Sep 05, 2009 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

I have kenmore dishwasher and the clean light is flashing green and nothing else will start.


To reset hit buttons in this order- hi temp, air dry, hi-temp, air dry. All lites will come on. You can then hit cancel. If problem recurs then unit is not washing for some reason. Keep me posted. Please leave feedback.

Nov 28, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

"Lock on" light keeps flashing - cannot run dishwasher


same issue..

Other boards suggested heating element issue - but nothing very clear or compelte.

Aug 10, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

2 Answers

Keeps flashing clean Kenmore dishwasher 665.17019401 need a new owners manual


i was trying to install my kenmore elite 665 dishwasher but i cant find the plug do they come with one? or were do i hook it up?

Sep 22, 2007 | Dishwashers

Not finding what you are looking for?
Whirlpool 24 in. DU1148XTP Built-in Dishwasher Logo

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...