Question about Washing Machines

2 Answers

Unable to switch on power - Washing Machines

Posted by on

  • 1 more comment 
  • Anonymous Jun 22, 2008

    same issue
    no power outlet is Okay!
    BTW there is NO fuse in the plug :)


  • Anonymous Sep 05, 2008

    wont power up and smells like smoke

  • pete1742 Sep 07, 2008

    I have no power at all to my Hoover AL 130 fast iron. It's stopped mid wash. None of the red lights at the front will light, not even the door locked light. I've checked the plug/switch and fuse and they are ok. Any suggestions?



    Thanks Pete

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, the electrical socket is good. Hairdryer works both inserts. Is there areset button?

Posted on May 30, 2010

  • janderson876 May 30, 2010

    The circuts are good. No tripped breakers....the only thing BLOWING is the help I'm getting right now.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

Is there power in your wall socket? Check for power with another device at this power point. Check the fuse in your power plug..................

Posted on Apr 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Miele washing machine 6065 stuck on main wash programme , unable to clear or reset . any ideas ?


Switch off machine for some time maybe overnight. Press and hold on panel buttons to drain off voltage. when powered hold on start/stop/pause button. If the program does not reset it be fault in the memory or the processor.

Jan 23, 2013 | Washing Machines

1 Answer

Button got pushed in too far and now unable to start machine


Possible that the button is struck and so does not activate the switch. Please try and remove the power and remove the panel to reset the switch contact before the controller panel can be checked.

Jun 11, 2012 | Washing Machines

1 Answer

Hotpoint wt640 door locked light does not come on. I have changed the door lock module but still the same fault.


I assume that the power is okay and getting to machine,if yes then try off/on switch faulty pole its a two pole switch,if your unable to test do not have a multimeter/ then you could short out the poles just make sure its the correct ones are shorted otherwise may damage or blow a fuse.....good luck.

Apr 21, 2011 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Belive water has got into the controls after flooding, unable to unlock door all lights flashing


Disconnect the power and let the water drain off after the door is unlocked from the inside from the bottom. Now check the door switch and confirm the continutity.
Dry off the controller and confirm that there are no traces of water present.

Mar 18, 2011 | Washing Machines

1 Answer

Maytag washine machine selector/timer is stuck, unable to turn the knob.


Possible that the TIMER CONTROLLER unit is jammed and so struck. This can be a failure of a link or the step within the multi-switch. You can try to use a de-greasing spray - after disconnection of power and see if this helps. Toggle the switch and try or if not the timer might be needed to be changed.

Jan 22, 2011 | Washing Machines

1 Answer

Unable to use washer due to key logo 'flashing'. Have checked the plug at bottom right of machine no blockage there.


Hi,
Please try this
the key and flashing = child lock.

close washing machine door, turn to normal setting, press the power switch and keep pressing for several seconds. The symbol should disappear and the beeping should stop.




Than You

Sep 08, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

I have just purchased a Hotpoint washing machine WMD 962 Ultimate. On switching on for the first time there was a language selection programme and in error I entered Italian I am now unable to change the...


OK the manual has it a little wrong.
What you have to do is switch the power off (not at the wall but on the machine itself)
then press the three buttons for around 5 seconds till you hear a beeb
next time you switch it on it will be back to the language selection
just follow the manual to select.

Aug 02, 2010 | Hotpoint Washing Machines

2 Answers

Error code f06


F06 is a Drive Motor Tachometer Error (Unable to Detect Motor Speed).

Disconnect mains power and unplug unit. Check the wire harness connections between drive motor and Motor Control Unit (MCU), and then between MCU and the Central Control Unit (CCU).

Reconnect mains power and switch the unit on. Check the MCU by looking for operation of the drive motor and check drive motor for cyclic powered rotation. Replace any failed component.

Note: If this failure occurs during high speed spin, the door will be unlocked after three minutes

Oct 08, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Door can't be opened


Potential reasons for it: - Door Lock/Switch Assembly Failure - In this case it should be replaced. - Door Lock unit is broken or removed from the door. - Look for disconnected wires to the door Lock/Switch unit. - Door Lock/Switch unit Failure First disconnect the machine power cable from the wall socket. You should remove machine's top cover and then you will have an access to the door lock unit.

Sep 20, 2007 | Creda W120VW Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...