Question about HP Pavilion s7320n (EP140AA) PC Desktop

1 Answer

As our computer warms up the screen starts breaking up into boxes and lines to the point where you can't hardly see the screen. If you restart the comp, it's ok for a few minutes and starts all over again. Can someone help me with this? Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

This sounds like there is an issue with the video in the computer. If you have a video card installed in the machine then it's overheating.

Try keeping the case open or installing a fan that blows cool air inside the machine. This will lower the overall temperature of the machine and you won't see this problem occur again.

Posted on Jun 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gateway factory restore without disc


hope it helps


Instructions:
  • 1. From the Windows Vista default Start menu, click All Programs >Gateway > Gateway Recovery Management
  • 2. In the Gateway Recovery Management window, click Restore, and then Restore system to factory default
  • 3. In the Confirm Restoration dialog box, select Yes, and then click Start
    • Note: You are prompted to enter your password if a password was set
  • 4. In the Confirm Restoration dialog box, click OK
  • 5. The computer restarts
  • 6. Windows loads files
  • 7. The Please wait a moment screen is displayed
  • 8. In the Restore from factory default dialog box, click Next
  • 9. In the Destination Disk Information dialog box, click Next
  • 10. In the Notice dialog box, click OK
  • 11. The hard drive partition is created
  • 12. The factory default installation is copied to the hard drive
  • 13. In the Finished dialog box, click OK
  • 14. The Please wait a moment screen is displayed and then the computer restarts
  • 15. Windows prepares to start for the first time - this may take a few minutes
  • 16. Windows continues setting up the computer
  • 17. The computer restarts
  • 18. In the Set up Windows screen, click Next
  • 19. In the Please read the license terms screen, select 'I accept the license terms' for each item and then click Next.
  • 20. In the Choose a user name and picture screen, enter the appropriate information and click Next
  • 21. In the Type a computer name and choose a desktop background screen, enter the appropriate information and click Next
  • 22. In the Help protect Windows automatically screen, click Use recommended settings
  • 23. In the Review your time and date settings screen, select the appropriate settings, and then click Next
  • 24. In the Select your computer's current location screen, click the appropriate option
  • 25. In the Thank You screen, click Start
  • 26. Windows checks the computers performance
    • Depending on your hardware, this process could take up to 15 minutes to complete
  • 27. Windows prepares the desktop
  • 28. The Gateway Recovery Management is installed
  • 29. Installation is complete

May 10, 2014 | Dell Inspiron 1501 Notebook

1 Answer

Online pc scan


You could run the chkdsk disk utility
Click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your Hard Drive.
or an easier way to run the chkdsk utility
Windows 7 chkdsk
http://www.w7forums.com/use-chkdsk-check-disk-t448.html
Click start control panel administrative tools computer management ,disk management right click on your drive select properties click tools click check now click start two boxes
automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now, start should schedule this task when restart
have no input while the chkdsk utility is in progress any input may further damage your computers Operating System and Hard Drive
http://download.cnet.com/jetclean/3000-18512_4-75627788.html
JetClean tidies your registry, gets rid of junk files, deletes broken shortcuts, and attempts to give your computer that like-new feel again.
Optimizers and Diagnostics.
http://download.cnet.com/360Amigo-System-Speedup-Pro/3000-18512_4-75332741.html 5E3422139C19CBED35C14826A44D4605
Improve your PC performance and fix errors.

if the problem is still persisting
Your computer's BIOS screen can be incredibly useful when you need to make certain hardware or system configurations.
How to access the BIOS on your laptop varies from manufacturer to manufacturer and model to model.
Even though Acer laptops are created by the same manufacturer, not all models access BIOS in the same manner.
While accessing the BIOS setup screen in and of itself is not difficult all you need to do is press a key the difficulty is in figuring out which key to hit.
Restart or power on the laptop.
Hit the "Pause/Break" key the moment the Acer boot screen (not the OS start-up screen) appears.
If the OS start-up screen appears before you can hit Pause/Break, you will need to restart the laptop.
Press "F2" or "Del" to access the BIOS set-up screen.
Depending on the age of your Acer laptop, you may need to instead press "Ctrl," "Alt" and "Esc" simultaneously to access BIOS.
Using the arrow keys navigate failsafe or optimized defaults press F10 to safe to cmos and exit to restart.

Jul 15, 2013 | Acer Aspire Computers & Internet

1 Answer

Sony vaio all in one touchscreen stopped working


XP and Vista Normal Mode Start your computer as you normally would. Click the "My Computer" icon on your desktop. Go to "C:\ Program Files\Sony\Setting Utility Series." Find and choose the "VCCPointingDevice" folder in the "Setting Utilities Series folder" to open the "Built-in Pointing Device" dialog box. Locate the "Enable" box on the "Built-in Pointing Device" dialog box. Check the box to enable the Vaio touchpad if you wish to use this device. Disable the touchpad if it is interfering with the external mouse. Uncheck the "Enable" box if you have a USB (PS/2) mouse connecting to your Vaio and wish to use that instead of the built-in touchpad. Pick "Yes, I'm Sure" when prompted to activate your choice, then close all the windows. Windows 7 Normal Mode Launch Windows as usual. Go to "Start" > "Control Panel" > "Mouse" > "Pointing Device" to open the Vaio touchpad control center. Uncheck the "Enable" box on the "Pointing Device" window when you wish to use your external mouse. Check the "Enable" box on the "Pointing Device" window when you want to use the Sony Vaio touchpad. Make sure the external mouse is not interfering with the touchpad if you have one connected. If so, unplug the mouse from your computer. Click the "OK" button at the bottom of the "Pointing Device" window. Close all other windows. XP and Vista Safe Mode Restart your computer. Press the F8 key before the Windows welcome screen appears to enter Safe Mode. Click "Start" > "Control Panel" > "Add/Remove Programs." Find and delete all software for mice and pointing devices. Restart your computer in normal Windows mode. Proceed to next step if the problem persists. Restart your computer in Safe Mode. Right click the "My Computer" icon on the desktop. Choose "Properties" on the drop-down list. Pick the "Device Manager" tab in the Properties window. Select the "Other Devices" folder and click on the "+" sign besides it. Delete all the devices under this "+" sign by clicking on the "Remove" button next to each of the items. Restart Windows in Normal Mode. Once Windows is operating, there will be a "New Hardware Wizard" pop-up that will load all the necessary drivers for the touchpad, mouse and other pointing devices. This should fix the corrupt driver for your Vaio touchpad. Windows 7 Safe Mode Reboot your computer and press the F8 key before the Windows welcome screen appears to enter Safe Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Click the touchpad icon. Choose the "Driver" tab and press the "Uninstall" button. Press the "OK" button to confirm. Restart Windows in Normal Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Choose the "Driver" tab and press the "Update" button. Press the "OK" button to fix the touchpad software.

http://esupport.sony.com/perl/swu-list.pl?mdl=PCGFRV26

Feb 08, 2013 | Sony VAIO Computers & Internet

1 Answer

Sony vaio touch screen stopped working


XP and Vista Normal Mode Start your computer as you normally would. Click the "My Computer" icon on your desktop. Go to "C:\ Program Files\Sony\Setting Utility Series." Find and choose the "VCCPointingDevice" folder in the "Setting Utilities Series folder" to open the "Built-in Pointing Device" dialog box. Locate the "Enable" box on the "Built-in Pointing Device" dialog box. Check the box to enable the Vaio touchpad if you wish to use this device. Disable the touchpad if it is interfering with the external mouse. Uncheck the "Enable" box if you have a USB (PS/2) mouse connecting to your Vaio and wish to use that instead of the built-in touchpad. Pick "Yes, I'm Sure" when prompted to activate your choice, then close all the windows. Windows 7 Normal Mode Launch Windows as usual. Go to "Start" > "Control Panel" > "Mouse" > "Pointing Device" to open the Vaio touchpad control center. Uncheck the "Enable" box on the "Pointing Device" window when you wish to use your external mouse. Check the "Enable" box on the "Pointing Device" window when you want to use the Sony Vaio touchpad. Make sure the external mouse is not interfering with the touchpad if you have one connected. If so, unplug the mouse from your computer. Click the "OK" button at the bottom of the "Pointing Device" window. Close all other windows. XP and Vista Safe Mode Restart your computer. Press the F8 key before the Windows welcome screen appears to enter Safe Mode. Click "Start" > "Control Panel" > "Add/Remove Programs." Find and delete all software for mice and pointing devices. Restart your computer in normal Windows mode. Proceed to next step if the problem persists. Restart your computer in Safe Mode. Right click the "My Computer" icon on the desktop. Choose "Properties" on the drop-down list. Pick the "Device Manager" tab in the Properties window. Select the "Other Devices" folder and click on the "+" sign besides it. Delete all the devices under this "+" sign by clicking on the "Remove" button next to each of the items. Restart Windows in Normal Mode. Once Windows is operating, there will be a "New Hardware Wizard" pop-up that will load all the necessary drivers for the touchpad, mouse and other pointing devices. This should fix the corrupt driver for your Vaio touchpad. Windows 7 Safe Mode Reboot your computer and press the F8 key before the Windows welcome screen appears to enter Safe Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Click the touchpad icon. Choose the "Driver" tab and press the "Uninstall" button. Press the "OK" button to confirm. Restart Windows in Normal Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Choose the "Driver" tab and press the "Update" button. Press the "OK" button to fix the touchpad software.

http://esupport.sony.com/perl/swu-list.pl?mdl=PCGFRV26

Feb 08, 2013 | Sony VAIO VGC-LV180J 24-Inch All-in-One PC...

1 Answer

TOUCH PAD NOT WORKING


The Sony Vaio laptop is typically sold with a touchpad device installed below the keyboard. The touchpad is for navigating the screen and is used like an external mouse. A touchpad can sometimes malfunction for no apparent reason, but there are ways on troubleshooting the device yourself before asking a technician for help. Start your computer as you normally would. Click the "My Computer" icon on your desktop. Go to "C:\ Program Files\Sony\Setting Utility Series." Find and choose the "VCCPointingDevice" folder in the "Setting Utilities Series folder" to open the "Built-in Pointing Device" dialog box. Locate the "Enable" box on the "Built-in Pointing Device" dialog box. Check the box to enable the Vaio touchpad if you wish to use this device. Disable the touchpad if it is interfering with the external mouse. Uncheck the "Enable" box if you have a USB (PS/2) mouse connecting to your Vaio and wish to use that instead of the built-in touchpad. Pick "Yes, I'm Sure" when prompted to activate your choice, then close all the windows. Windows 7 Normal Mode Launch Windows as usual. Go to "Start" > "Control Panel" > "Mouse" > "Pointing Device" to open the Vaio touchpad control center. Uncheck the "Enable" box on the "Pointing Device" window when you wish to use your external mouse. Check the "Enable" box on the "Pointing Device" window when you want to use the Sony Vaio touchpad. Make sure the external mouse is not interfering with the touchpad if you have one connected. If so, unplug the mouse from your computer. Click the "OK" button at the bottom of the "Pointing Device" window. Close all other windows. b> XP and Vista Safe Mode b> Restart your computer. Press the F8 key before the Windows welcome screen appears to enter Safe Mode. Click "Start" > "Control Panel" > "Add/Remove Programs." Find and delete all software for mice and pointing devices. Restart your computer in normal Windows mode. Proceed to next step if the problem persists. Restart your computer in Safe Mode. Right click the "My Computer" icon on the desktop. Choose "Properties" on the drop-down list. Pick the "Device Manager" tab in the Properties window. Select the "Other Devices" folder and click on the "+" sign besides it. Delete all the devices under this "+" sign by clicking on the "Remove" button next to each of the items. Restart Windows in Normal Mode. Once Windows is operating, there will be a "New Hardware Wizard" pop-up that will load all the necessary drivers for the touchpad, mouse and other pointing devices. This should fix the corrupt driver for your Vaio touchpad. b> Windows 7 Safe Mode b> Reboot your computer and press the F8 key before the Windows welcome screen appears to enter Safe Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Click the touchpad icon. Choose the "Driver" tab and press the "Uninstall" button. Press the "OK" button to confirm. Restart Windows in Normal Mode. Go to "Start" > "Control Panel" > "Device Manager" > "Mice and other pointing devices." Choose the "Driver" tab and press the "Update" button. Press the "OK" button to fix the touchpad software. Hope this help.

Jan 16, 2013 | Sony Nice Vaio Pcg-81312l Laptop Notebook...

1 Answer

What to do factory reset on the hard drive what key do hit


There is not much you can do other than formatting a hard drive or running the chkdsk utility to rerurn it to factory reset

During the boot process you will see on the screen to press a certain key to enter setup


Press and hold that key during the boot up process to enter BIOS then using the arrow keys navigate to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos restart

click start run type cmd then type chkdsk/r/f which will scan for and attempt to recovery any bad sectors and automatically fix any corrupt files on your hard drive there are many ways of running the chkdsk utility


click start right click on my computer you should see your drive usually C: select properties click tools check now tick both boxes automatically fix files and scan for and attempt recovery on any bad sectors


then select check now start should schedule this task when restart

it will only schedule on restart if its the Primary hard drive with an operating system on it

do not do anything while the chkdsk utility is in progress any input may damage your computer


for USB drives click start control panel administrative tools computer management disk management right click on your drive select properties click tools you should see click check now click start two boxes


automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now start

you should have no input while chkdsk utility is in progress any input might damage your hard drive and operating system

hope this helps


Sep 08, 2012 | HP Computers & Internet

1 Answer

Blue screen error plus blank start up screens but the start up sound can be heard.


Have you changed any BIOS settings? I would open your BIOS menu and make sure it is set to "AHCI"

Aug 21, 2012 | Lenovo IdeaPad U550 Notebook

4 Answers

How to reset my computer to an earlier date


If you are talking about in the Windows operating system all you have to do is move you cursor down to your task bar and all the way to the left. Right click on the time, and select "adjust date and time". Then type in or select your desired date and time and press okay. You can only change your time if you want, after that you are done.

Mar 01, 2011 | Toshiba Computers & Internet

1 Answer

1999 silverado is hard to start when engine is warm, and idles rough for a couple of seconds after starting


You may have a leaky fuel pressure regulator located on the LH side of the engine on the side of the fuel rail. The internal diaphram can leak fuel which then gets into the vacuum line attached to the regulator. From there the leaking fuel travels through the line and gets into the intake manifold causing the motor to be slightly flooded when you restart it. The regulator is round, about 1-1/2" diameter, and about that long and has a small 1/8" vacuum line attached to it. After the engine has been off for a few minutes if you remove the vacuum line from the regulator and find even a trace of fuel in the line then you've found your problem. Typical symptoms for a leaky regulator are: Starts fine cold and will restart fine warm if the engine has only been off for a minute or so. Restarts hard warm if the vehicle has sat for several minutes or up to an hour. May produce a bit of black smoke during the warm/hard start.

Jun 11, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Touch Screen not sensitive


that is wot most do. Lol Tamsinx

Mar 18, 2008 | Nintendo DS Lite Console

Not finding what you are looking for?
HP Pavilion s7320n (EP140AA) PC Desktop Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...