Question about Computers & Internet

2 Answers

Pen drive drivers

New pen drive isnt working properly,computer is showing as unrecognized device

Posted by on

  • hseth14 Jan 10, 2009

    i have a 512 mb quantum pen drive.
    but it isn't working properly in my one computer.
    i hav windows 98 in tht comp.it is telling 2 download a software of pen drive.
    i dunno which software has 2 b used..
    please help me.


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey i have 512 mb quantum pen driver when ever i plug it in it show the msg urecognised device. i checked 4 its driver they were not installed.

Posted on Dec 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 156 Answers

If its the windows XP you are using make sure you add the service pack 2 . then the prob wont occur.

BUt the prob you are having is rare, service pack installation or reinstallation should mostly do the job for you.

Posted on Apr 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

4 gb pendrive led glows but now shown in my computer, i tried to check in many computers and laptops but the same problem. please help me.


umm, how old are your computer and laptops that you're using to check?
It could be that they don't have a USB 2.0 port.

Is there any message at the bottom right of your computer when you plug it in saying anything related to a USB device.

Also you can click on Start/"right-click" My Computer/Manage/Device Manager/Universal Serial Bus Controllers --- make sure that this says it's working properly and enabled.

Dec 09, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

My iball 4gb pen drive problem.... when i connect it to computer shows usb device unrecognized...


the drivers might have been corrupted
control panel admistrive tools,computer management,device manager scroll down to universal serial bus controllers you should see a yellow question mark? right click to reinstall drivers or ports(com&lpt)or communications port right click update driver
hope this helps

Nov 21, 2010 | Computers & Internet

1 Answer

I have kingston 2GB pen drive. when i insert this its shown found new hardware yyyyyyyyyyyyyyyyyy............yyyyyyyyyyy USB device when i click on it its gone for driver installation. when i click for...


These kingston pen drives should load without having to find a driver on anything newer than xp and up. try it in a different port on the rear of your machine if possible and make sure you fully seat the stick into the usb port, as this will sometimes cause this problem. once inserted you should be able to browse the kingston drive on "my computer". if not look for a damaged socket or try the key in another computer to verify if it works properly

Aug 29, 2010 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

Pen drive issue


Try a totally independant PC away from the ones you tried....if no go drive has failed and data will be lost sorry.

Jan 07, 2010 | Kingston (SDCZ2-512-A10-KT)...

1 Answer

Transcend pendrive


you just uninstall that unkown device which you get in device manager and reconnect the pendrive if again it says unknown device then goto update driver and select 2nd option which is advanced in that select don't search for driver i'll select and select the driver which is shown in the list and click next and finish ur pendrive will works

Jul 08, 2009 | Transcend 32GB ExpressCard SSD, MLC 32 GB...

1 Answer

I don't have driver of pen drive in windows 98


Let's check your Windows 98 Version first :)
  • Right click on My Computer and select Properties
  • On the System Properties page that opens up click on the General tab, if it is not already on that page.
  • Under the System heading, look for the version number (see right)
    • Version 4.10.1998 is the original version of Windows 98 (98FE)
    • Version 4.10.2222 is Windows 98 Second Edition (98SE)
  • Click the link below for the download and installation instructions for your version of Windows 98
Fo Windows 98 FE:
  1. Download and install the Windows 98 Service Pack (35.5Mb)
  2. Download to your desktop the driver file from the Download section below
  3. Remove ALL drivers for USB flash drives in Device Manager (Optional)
  4. Remove ALL drivers for any USB 2.0 controllers (many have an uninstall option) (Optional)
  5. Remove ALL unknown devices from Device Manager
  6. Run the exe file you downloaded, and follow the instructions, rebooting after installation
  7. When the computer boots up again, it may detect new USB 2.0 controllers, in which case you may need to reboot again
The drivers can be downloaded from the following link:
Windows 98 FE Generic USB Mass Storage Device Drivers v3.20


For Windows 98SE:
  1. Download the exe file to the desktop
  2. Remove ALL drivers for USB flash drives in Device Manager
  3. Remove ALL drivers for any USB 2.0 controllers (many have an uninstall option)
  4. Remove ALL unknown devices from Device Manager
  5. Run the exe file you downloaded, and follow the instructions, rebooting after installation
  6. When the computer boots up again, it may detect new USB 2.0 controllers, in which case you may need to reboot again
The drivers can be downloaded from the following link:

Windows 98 SE Generic USB Mass Storage Device Drivers v3.3

For detail explanation, please visit http://www.technical-assistance.co.uk.
It's help for me :)

Thanks
AkulahPathub

Mar 13, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

3 Answers

Cannot reformat my USB 4gb kingston


the reason is ur pen drive has lost its capacity to store datas. u cant use that pen drive anymore and it cannot be formatted also. try for a new pen drive

Jan 18, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

Phillips external hard drive


If its an usb drive, no driver is required. The drive will show itself in My Computer after it is commected. Uninstall the driver, shut down, connect the device to the computer and start the computer.Tell me if it works. Also, when posting a question, give full details.

Feb 17, 2008 | Computers & Internet

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98879 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...