Question about Canon PowerShot SD1400 IS IXUS 130 Digital Camera

2 Answers

E32 error with canon ixus 130

While capturing a picture with canon ixus 130,the camera autometically shuts down after some minuties & shows a messege 'camera error,restart camera.
will autometically shut down
E32.'
I've reset my camera but it didn't work. there is no option of restarting camera.pleae give me a solution.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have purchased recently canon ixus 130, the camera automatically shuts down after some 30 sec& shows a messege 'camera error,restart camera will autometically shut down error
E32.'

Posted on Aug 19, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hello everyone,

I'm posting this even though I have a Canon SD1400 IS because this error seems to be a pretty common error among different Canon models so...

If your camera lens is working fine (expanding and contracting unobstructed) and your camera sometimes seem to work and sometimes fail, then I'm sorry to say that your camera is about to bite the dust.

At least in my case I found that it's a bad hardware design on the SD1400 IS camera.

I have posted a lengthy post over at G+ with pictures of my findings.

I basically discovered that the E32 error can be caused by a bad design where a data cable (or otherwise known as flex cable) inside the Optics Module has or is about to permanently fail due to a fold caused by pressure and the normal lens operation (popping in and out) makes this fold to break, thus causing intermittent problems at first and permanent damage eventually.

If you want to see some pictures check this link: https://plus.google.com/u/0/?tab=XX#102193860939068988436/posts/U74ahn9hgLs

Posted on Dec 28, 2011

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: Canon Camera Error E32. Camera

The most common problems in these small tiny cameras is the lens alignment. If you drop the camera with the lens extended this alignment will ****. If you are a handyman you can fix it by yourself by oppening it inside and realign/putting the lens in right position. Sometimes you can do that by forcing them to extednd manualy but that is very risky. If not handyman I recomand you to take it to a repair shop.

Posted on Jan 27, 2011

lock123
  • 6831 Answers

SOURCE: My Canon IXUS 130 camera

Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on May 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E32


Is this a lens error or an error with the memory card? People seem to see this error for both cases.

If it occurs while recording a video or taking a photo:
  • Save your photos & videos onto your computer, then reformat your memory card.


If it is a lens error:

Best of Luck!

Aug 28, 2012 | Canon PowerShot SD1400 IS IXUS 130...

1 Answer

Error e32 keep reappearing while taking photoes.


maybe it is something wrong with your lens,lens error

www.skiliwah.cn/

http://www.digitalcamera-parts.net/

e-mail:e-8090team@hotmail.com

 

Sep 02, 2011 | Canon PowerShot SD1400 IS IXUS 130...

2 Answers

Canon Camera Error E32. Camera Error Camera will shut down automatically. Please restart your camera. Please help me. I am using Canon Powershot


The most common problems in these small tiny cameras is the lens alignment. If you drop the camera with the lens extended this alignment will ****. If you are a handyman you can fix it by yourself by oppening it inside and realign/putting the lens in right position. Sometimes you can do that by forcing them to extednd manualy but that is very risky. If not handyman I recomand you to take it to a repair shop.

Jan 27, 2011 | Canon PowerShot SD1400 IS IXUS 130...

1 Answer

Cannot take a shot


"It can take very clear and vibrant pictures, and it lives up to the high expectation that the IXUS/Powershot brand has forged over the years, particularly for premium models such as this one. However, its button design and build quality are from perfect and can make the camera frustrating to use. Nevertheless, if you want a very small camera that can capture great images, it's hard to overlook the Canon IXUS 130 IS/PowerShot SD1400 IS."

Oct 20, 2010 | Canon PowerShot SD1400 IS IXUS 130...

1 Answer

Can i use my canon ixus 130 as a webcam. does it support remote capture?


No. The IXUS 130 is designed to store images (and videos) to memory, not to stream live video to another device.

Sep 11, 2010 | Canon PowerShot SD1400 IS IXUS 130...

2 Answers

Sd1400 canon camera error e32


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful. Please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Sep 10, 2010 | Canon PowerShot SD1400 IS IXUS 130...

1 Answer

Error msg E32


Its showing an error message. As its new take it back to the vendor and get them to sort it out, replace it or give you a refund. Its still under warranty, you don't want to void the warranty by messing about with it.

May 02, 2010 | Canon IXUS 970 IS Digital Camera

Not finding what you are looking for?
Canon PowerShot SD1400 IS  IXUS 130 Digital Camera Logo

10,522 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...